Preparation and Stability of PEGDA/GO Conductive Materials by DLP 3D Printing
Source abstract
Abstract
Stable composites of water-dispersed graphene oxide (GO) and UV-cured acrylic resin, poly (ethylene glycol) diacrylate (PEGDA), were prepared to make printed conductive patterns using a digital light processing (DLP) three-dimensional (3D) printing method. The targeted structures were successfully printed by DLP 3D printing and the electrically conductive properties were obtained by reducing the insulating GO in the composites to reduced GO by chemical and thermal reduction processes. Three basic reduction procedures, pre-thermal, pre-chemical, and post-thermal reduction, were performed to introduce a high conductivity into a printed structure and the lowest resistance was achieved by the pre-thermal reduction in our study. The stability of the printed structures was also evaluated by monitoring the change in resistance with time. The strategy pursued by photopolymerization gives the outstanding features of printed structures for extensive applications in the manufacturing of electronic and sensing devices. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Li, H., Cao, X., Li, B., Zhou, X., Lu, G., Liusman, C., He, Q., Boey, F., Venkatraman, S.S., Zhang, H.: Single-layer graphene oxide sheet: a novel substrate for dip-pen nanolithography. Chem. Commun. 47, 10070–10072 (2011). https://doi.org/10.1039/c1cc12648b10.1039/c1cc12648b ↗
2. Worsley, M.A., Pauzauskie, P.J., Olson, T.Y., Biener, J., Satcher, J.H., Baumann, T.F.: Synthesis of graphene aerogel with high electrical conductivity. J. Am. Chem. Soc. 132, 14067–14069 (2010). https://doi.org/10.1021/ja107229910.1021/ja1072299 ↗
3. Wu, Z.S., Ren, W., Gao, L., Zhao, J., Chen, Z., Liu, B., Tang, D., Yu, B., Jiang, C., Cheng, H.M.: Synthesis of graphene sheets with high electrical conductivity and good thermal stability by hydrogen arc discharge exfoliation. ACS Nano 3, 411–417 (2009). https://doi.org/10.1021/nn900020u10.1021/nn900020u ↗
4. Lee, Y.R., Raghu, A.V., Jeong, H.M., Kim, B.K.: Properties of waterborne polyurethane/functionalized graphene sheet nanocomposites prepared by an in situ method. Macromol. Chem. Phys. 210, 1247–1254 (2009). https://doi.org/10.1002/macp.20090015710.1002/macp.200900157 ↗
5. Xu, Y., Wang, Y., Liang, J., Huang, Y., Ma, Y., Wan, X., Chen, Y.: A hybrid material of graphene and poly (3,4-ethyldioxythiophene) with high conductivity, flexibility, and transparency. Nano Res. 2, 343–348 (2009). https://doi.org/10.1007/s12274-009-9032-910.1007/s12274-009-9032-9 ↗
6. Yoo, B.M., Shin, H.J., Yoon, H.W., Park, H.B.: Graphene and graphene oxide and their uses in barrier polymers. J. Appl. Polym. Sci. 131, 1–23 (2014). https://doi.org/10.1002/app.3962810.1002/app.39628 ↗
7. Du, Y.C., Huang, L.J., Wang, Y.X., Yang, K., Tang, J.G., Wang, Y., Cheng, M.M., Zhang, Y., Kipper, M.J., Belfiore, L.A., Ranil, W.S.: Recent developments in graphene-based polymer composite membranes: preparation, mass transfer mechanism, and applications. J. Appl. Polym. Sci. 136, 1–20 (2019). https://doi.org/10.1002/app.4776110.1002/app.47761 ↗
8. Chen, C., Qiu, S., Cui, M., Qin, S., Yan, G., Zhao, H., Wang, L., Xue, Q.: Achieving high performance corrosion and wear resistant epoxy coatings via incorporation of noncovalent functionalized graphene. Carbon N. Y. 114, 356–366 (2017). https://doi.org/10.1016/j.carbon.2016.12.04410.1016/j.carbon.2016.12.044 ↗
9. Liang, Y., Wu, D., Feng, X., Müllen, K.: Dispersion of graphene sheets in organic solvent supported by ionic interactions. Adv. Mater. 21, 1679–1683 (2009). https://doi.org/10.1002/adma.20080316010.1002/adma.200803160 ↗
10. Liu, K., Chen, L., Chen, Y., Wu, J., Zhang, W., Chen, F., Fu, Q., An, B.W., Kim, K., Kim, M., Kim, S.Y., Hur, S.H., Park, J.U.: Direct printing of reduced graphene oxide on planar or highly curved surfaces with high resolutions using electrohydrodynamics. J. Mater. Chem. 11, 8612–8617 (2015). https://doi.org/10.1039/c1jm10717h10.1039/c1jm10717h ↗
11. Liu, K., Chen, L., Chen, Y., Wu, J., Zhang, W., Chen, F., Fu, Q.: Preparation of polyester/reduced graphene oxide composites via in situ melt polycondensation and simultaneous thermo-reduction of graphene oxide. J. Mater. Chem. 21, 8612–8617 (2011). https://doi.org/10.1039/c1jm10717h10.1039/c1jm10717h ↗
12. Gao, W., Alemany, L.B., Ci, L., Ajayan, P.M.: New insights into the structure and reduction of graphite oxide. Nat. Chem. 1, 403–408 (2009). https://doi.org/10.1038/nchem.28110.1038/nchem.281 ↗
13. Pei, S., Cheng, H.M.: The reduction of graphene oxide. Carbon N. Y. 50, 3210–3228 (2012). https://doi.org/10.1016/j.carbon.2011.11.01010.1016/j.carbon.2011.11.010 ↗
14. Stankovich, S., Dikin, D.A., Dommett, G.H.B., Kohlhaas, K.M., Zimney, E.J., Stach, E.A., Piner, R.D., Nguyen, S.B.T., Ruoff, R.S.: Graphene-based composite materials. Nature 442, 282–286 (2006). https://doi.org/10.1038/nature0496910.1038/nature04969 ↗
15. Tkachev, S.V., Buslaev, E.Y., Naumkin, A.V., Kotova, S.L., Laure, I.V., Gubin, S.P.: Reduced graphene oxide. Inorg. Mater. 48, 796–802 (2012). https://doi.org/10.1134/S002016851208015810.1134/S0020168512080158 ↗
16. Ye, S., Feng, J.: A new insight into the in situ thermal reduction of graphene oxide dispersed in a polymer matrix. Polym. Chem. 4, 1765–1768 (2013). https://doi.org/10.1039/c3py00019b10.1039/c3py00019b ↗
17. Raslan, A., Saenz del Burgo, L., Ciriza, J., Luis Pedraz, J.: Graphene oxide and reduced graphene oxide-based scaffolds in regenerative medicine. Int. J. Pharm. 580, 119226 (2020). https://doi.org/10.1016/j.ijpharm.2020.11922610.1016/j.ijpharm.2020.119226 ↗
18. Bonaccorso, F., Colombo, L., Yu, G., Stoller, M., Tozzini, V., Ferrari, A.C., Ruoff, R.S., Pellegrini, V.: Graphene, related two-dimensional crystals, and hybrid systems for energy conversion and storage. Science (80-) 347, 1246501 (2015). https://doi.org/10.1126/science.124650110.1126/science.1246501 ↗
19. Figueroa, N., Dong, H., El Saddik, A.: From sense to print: towards automatic 3D printing from 3D sensing devices. In: Proceedings of 2013 IEEE International Conference on Systems, Man and Cybernetics, SMC 2013, pp. 4897–4904 (2013). https://doi.org/10.1109/SMC.2013.83310.1109/SMC.2013.833 ↗
20. Rusling, J.F.: Developing microfluidic sensing devices using 3D printing. ACS Sens. 3, 522–526 (2018). https://doi.org/10.1021/acssensors.8b0007910.1021/acssensors.8b00079 ↗
21. Leigh, S.J., Bradley, R.J., Purssell, C.P., Billson, D.R., Hutchins, D.A., Simple, A.: Low-cost conductive composite material for 3D printing of electronic sensors. PLoS ONE 7, 1–6 (2012). https://doi.org/10.1371/journal.pone.004936510.1371/journal.pone.0049365 ↗
22. Zhang, F., Tuck, C., Hague, R., He, Y., Saleh, E., Li, Y., Sturgess, C., Wildman, R.: Inkjet printing of polyimide insulators for the 3D printing of dielectric materials for microelectronic applications. J. Appl. Polym. Sci. 133, 1–11 (2016). https://doi.org/10.1002/app.4336110.1002/app.43361 ↗
23. Sangermano, M., Marchi, S., Valentini, L., Bon, S.B., Fabbri, P.: Transparent and conductive graphene oxide/poly(ethylene glycol) diacrylate coatings obtained by photopolymerization. Macromol. Mater. Eng. 296, 401–407 (2011). https://doi.org/10.1002/mame.20100037210.1002/mame.201000372 ↗
24. Giardi, R., Porro, S., Chiolerio, A., Celasco, E., Sangermano, M.: Inkjet printed acrylic formulations based on UV-reduced graphene oxide nanocomposites. J. Mater. Sci. 48, 1249–1255 (2013). https://doi.org/10.1007/s10853-012-6866-410.1007/s10853-012-6866-4 ↗
25. Wu, L., Liu, L., Gao, B., Muñoz-Carpena, R., Zhang, M., Chen, H., Zhou, Z., Wang, H.: Aggregation kinetics of graphene oxides in aqueous solutions: experiments, mechanisms, and modeling. Langmuir 29, 15174–15181 (2013). https://doi.org/10.1021/la404134x10.1021/la404134x ↗
26. Maio, A., Fucarino, R., Khatibi, R., Rosselli, S., Bruno, M., Scaffaro, R.: A novel approach to prevent graphene oxide re-aggregation during the melt compounding with polymers. Compos. Sci. Technol. 119, 131–137 (2015). https://doi.org/10.1016/j.compscitech.2015.10.00610.1016/j.compscitech.2015.10.006 ↗
27. Mattevi, C., Eda, G., Agnoli, S., Miller, S., Mkhoyan, K.A., Celik, O., Mastrogiovanni, D., Granozzi, G., Carfunkel, E., Chhowalla, M.: Evolution of electrical, chemical, and structural properties of transparent and conducting chemically derived graphene thin films. Adv. Funct. Mater. 19, 2577–2583 (2009). https://doi.org/10.1002/adfm.20090016610.1002/adfm.200900166 ↗
28. Bourlinos, A.B., Gournis, D., Petridis, D., Szabó, T., Szeri, A., Dékány, I.: Graphite oxide: chemical reduction to graphite and surface modification with primary aliphatic amines and amino acids. Langmuir 19, 6050–6055 (2003). https://doi.org/10.1021/la026525h10.1021/la026525h ↗
29. Fabbri, P., Montecchi, M., Pasquali, L., Bittolo Bon, S., Sangermano, M., Valentini, L., Foix, D.: In situ graphene oxide reduction during UV-photopolymerization of graphene oxide/acrylic resins mixtures. Polymer (Guildf) 53, 6039–6044 (2012). https://doi.org/10.1016/j.polymer.2012.10.04510.1016/j.polymer.2012.10.045 ↗
30. Chiappone, A., Roppolo, I., Naretto, E., Fantino, E., Calignano, F., Sangermano, M., Pirri, F.: Study of graphene oxide-based 3D printable composites: effect of the in situ reduction. Compos. Part B Eng. 124, 9–15 (2017). https://doi.org/10.1016/j.compositesb.2017.05.04910.1016/j.compositesb.2017.05.049 ↗
31. Wei, Z., Hou, Y., Jiang, C., Liu, H., Chen, X., Zhang, A., Liu, Y.: Graphene enhanced electrical properties of polyethylene blends for high-voltage insulation. Electron. Mater. Lett. 15, 582–594 (2019). https://doi.org/10.1007/s13391-019-00158-310.1007/s13391-019-00158-3 ↗
32. Balasubramaniyan, R., Pham, V.H., Jang, J., Hur, S.H., Chung, J.S.: A one pot solution blending method for highly conductive poly (methyl methacrylate)-highly reduced graphene nanocomposites. Electron. Mater. Lett. 9, 837–839 (2013). https://doi.org/10.1007/s13391-013-6025-310.1007/s13391-013-6025-3 ↗
33. Shim, J., Lee, J., Lee, J.S., Son, D.I.: Thermally enhanced Boron Nitride nanotube/reduced Graphene Oxide paper and their application. Electron. Mater. Lett. 17, 500–506 (2021). https://doi.org/10.1007/s13391-021-00304-w10.1007/s13391-021-00304-w ↗
34. Choi, E., Kim, J., Cui, Y., Choi, K., Gao, Y., Han, S., Pyo, S.G.: Effect of the graphene oxide reduction temperature on supercapacitor performance. Electron. Mater. Lett. 13, 324–329 (2017). https://doi.org/10.1007/s13391-017-1603-410.1007/s13391-017-1603-4 ↗