Microstructural analysis of Hastelloy C-276 under cryogenic machining
Source abstract
Abstract
The surface integrity of machined components is significantly influenced by the grain size and microstructural evolution of the material. This study investigates the microstructural refinement and texture evolution of Hastelloy C-276 under cryogenic machining. The machining experiments were conducted under dry and cryogenic (cryo) conditions with varying cutting speed, depth of cut, and feed rate. The machined specimens were subsequently sectioned along the machining direction using wire electrical discharge machining at ∼6 mm thickness intervals for further analysis. Severe plastic deformation played a pivotal role in grain refinement, while X-ray diffraction (XRD) analysis was employed to evaluate texture evolution and intensity variations. The cryo-machining process imposed lower temperatures in the machining zone, facilitating the formation of a strong texture orientation with an intensity enhancement. The results further confirmed a 41% reduction in grain size and a texture intensity increase up to 11.875. The cryogenic condition also caused a 47% reduction in XRD peak intensity, confirming grain refinement through severe plastic deformation. These findings highlight the potential of cryogenic machining to improve surface integrity and microstructural stability of Hastelloy C-276 for demanding industrial applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced machining processes and optimization · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Periyar Maniammai Institute of Science and Technology Department of Mechanical Engineering, , Thanjavur,
National Institute of Technology Department of Production Engineering, , Tiruchirappalli,
Indian Institute of Information Technology Department of Mechanical Engineering, , Tiruchirappalli, ; Department of Mechanical Engineering, J.J. College of Engineering and Technology, Tiruchirappalli, India
Indian Institute of Information Technology Department of Mechanical Engineering, , Tiruchirappalli,
References (32)
Show source-provided references
1. Experimental and numerical investigation of thermal loads in Inconel 718 machining10.1080/10426914.2018.1424907 ↗
2. Investigation of surface integrity in laser-assisted machining of nickel-based superalloy10.1016/j.matdes.2020.108851 ↗
3. Corrosion of structural alloys in high-temperature molten fluoride salts for applications in molten salt reactors10.1007/s11837-018-2981-2 ↗
4. Alloys for aeronautic applications: state of the art and perspectives10.3390/met9060662 ↗
5. Elevated temperature tribology of Ni alloys under helium environment for nuclear reactor applications10.1016/j.triboint.2018.03.021 ↗
6. High performance cutting of advanced aerospace alloys and composite materials10.1016/j.cirp.2015.05.002 ↗
7. Effect of novel hybrid texture tool on turning process performance in MQL machining of Inconel 718 superalloy10.1080/10426914.2019.1697444 ↗
8. State-of-the-art in surface integrity in machining of nickel-based super alloys10.1016/j.ijmachtools.2015.10.001 ↗
9. A comprehensive study on surface integrity of nickel-based superalloy Inconel 718 under robotic belt grinding10.1080/10426914.2018.1512137 ↗
10. Mechanism of ultra-high-speed cutting of Ti-6Al-4V alloy considering time-dependent microstructure and mechanical behaviors10.1007/s00170-021-06589-3 ↗
11. Microstructure, texture, and tensile properties of ultrafine/nano-grained magnesium alloy processed by accumulative back extrusion10.1007/s11661-017-4029-6 ↗
12. Investigation of surface integrity in dry machining of Inconel 71810.1007/s00170-013-5198-0 ↗
13. Response surface design model to predict surface roughness when machining Hastelloy C-2000 using uncoated carbide insert10.1088/1757-899x/36/1/012022 ↗
14. Effects of nano-cutting fluids on tool performance and chip morphology during machining Inconel 71810.1007/s00170-018-1825-0 ↗
15. Evaluating the use of high-pressure coolant in turning process of Inconel 625 nickel-based alloy10.1177/0954405416664373 ↗
16. A review on cutting tool technology in machining of Ni-based superalloys10.1007/s00170-020-06052-9 ↗
17. Experimental investigation on sustainable machining of Hastelloy C-276 utilizing different cooling strategies
18. Exploring cryo-MQL medium for hard machining of Hastelloy C276: a multi-objective optimization approach10.1007/s12008-024-02069-6 ↗
19. Experimental investigation and performance optimization during machining of Hastelloy C-276 using green lubricants10.3390/ma15155451 ↗
20. Cutting condition effects on microstructure and mechanical characteristics of Ni-based superalloys—a review10.1007/s00170-023-12910-z ↗
21. Hot deformation behavior of hastelloy C276 alloy: microstructural variation and constitutive models10.3390/ma16186192 ↗
22. Cryogenic minimum quantity lubrication machining: from mechanism to application
23. Research on the microstructure characterization and fatigue behavior of nickel-based superalloy subjected to short-arc and milling composite processing10.1186/s10033-025-01315-6 ↗
24. Experimental investigations on cryo-machining of Hastelloy C-276 with tool wear characteristics10.1007/s12046-020-01477-0 ↗
25. Microstructure-performance relationships in gas tungsten arc welded Hastelloy X nickel-based superalloy10.1016/j.msea.2020.139861 ↗
26. An investigation on constitutive relation and dynamic recrystallization of Hastelloy C-276 alloy during hot deformation10.1007/s11665-020-05057-5 ↗
27. Potential use of cryogenic cooling for improving the tribological and tool wear characteristics while machining aluminum alloys10.1016/j.triboint.2023.108434 ↗
28. Grain growth and Hall–Petch relationship in Ti–V–Al–Zr–Nb lightweight refractory complex concentrated alloys10.1016/j.jmrt.2025.10.067 ↗
29. Cryogenic assisted machining of hard to cut materials: a review
30. Microstructure refinement and work hardening in a machined surface layer induced by turning Inconel 718 super alloy10.1007/s12613-018-1643-2 ↗
31. The effect of initial texture on the plastic deformation of Gradient aluminum10.3390/ma16072603 ↗
32. Dry machining techniques for sustainability in metal cutting: a review10.3390/pr12020417 ↗