Tribological properties of WMoVCrTa and W23Mo23V17Cr8Ta7Fe22 high-entropy alloys
Source abstract
Abstract
Two new refractory high-entropy alloys (RHEAs) of WMoVCrTa and W23Mo23V17Cr8Ta7Fe22 were fabricated, and their wear test was carried out in severe sliding conditions such as wear against the hard SiC abrasive with heavy normal loads of 30 and 40 N. Wear resistance properties of the RHEAs were investigated and compared with that of high-speed steel (HSS) alloy. WMoVCrTa and W23Mo23V17Cr8Ta7Fe22 were found to have wear coefficients that were 1.9 and 2.5 times lower than those of HSS, respectively. Coefficients of friction (COF) of WMoVCrTa and W23Mo23V17Cr8Ta7Fe22 were 0.483 × 10−4 and 0.359 × 10−4 mm3/N·m, respectively, which were nearly half of the COF of HSS (0.917 × 10−4 mm3/N·m). Hence, the two RHEAs outperform the HSS in wear resistance properties. The W23Mo23V17Cr8Ta7Fe22RHEA exhibited tremendous wear resistance as its wear coefficient increased minimally by increasing the load significantly. Of the three alloys, W23Mo23V17Cr8Ta7Fe22 has the least wear volume and the lowest wear coefficient value that shows its superior wear resistance than the WMoVCrTa and HSS alloys. The major wear type identified in the two RHEAs was the abrasive wear. Emergence of substantial amount of self-lubricating wear debris aided in reducing the frictional force in the RHEAs during wear test.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Metal and Thin Film Mechanics · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
SRM University AP Department of Mechanical Engineering, , Neerukonda, Amravati, ; Department of Mechanical Engineering, Indian Institute of Technology Guwahati, Guwahati, India
Government Engineering College Department of Mechanical Engineering, , Samastipur,
Indian Institute of Technology Guwahati Department of Mechanical Engineering, , Guwahati,
SRM University AP Department of Mechanical Engineering, , Neerukonda, Amravati,
References (33)
Show source-provided references
1. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
2. Exploration and development of high entropy alloys for structural applications10.3390/e16010494 ↗
3. Critical assessment 14: high entropy alloys and their development as structural materials10.1179/1743284714Y.0000000749 ↗
4. Murty · 2014
5. Processing and characterizations of powder of the AlCoCuFeNi high entropy alloy10.1007/s42247-023-00466-3 ↗
6. Tribological properties of (Al)10(FeCoNiCu)90 high entropy alloy,tribology10.1080/17515831.2023.2168771 ↗
7. Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements10.1007/s11661-006-0234-4 ↗
8. A new high-entropy alloy of Al-Fe-Co-Ni-Cu possessing single FCC crystal structure and excellent mechanical properties at room temperature10.1002/pssa.202000825 ↗
9. Mechanical performance of the AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0218-9 ↗
10. Microstructures and compressive properties of multicomponent AlCoCrFeNiMox alloys10.1016/j.msea.2010.07.028 ↗
11. Synthesis and properties of multiprincipal component AlCoCrFeNiSix alloys10.1016/j.msea.2010.07.049 ↗
12. Microstructure and compressive properties of multiprincipal component AlCoCrFeNiCx alloys10.1016/j.jallcom.2010.10.047 ↗
13. The effect of Ti on the sintering and mechanical properties of refractory-high entropy alloy TixWTaVCr fabricated via spark plasma sintering for fusion plasma-facing materials10.1016/j.matchemphys.2017.06.054 ↗
14. Mechanical and electrical properties of NbMoTaW refractory high-entropy alloy thin films10.1016/j.ijrmhm.2019.02.005 ↗
15. Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys10.1016/j.intermet.2011.01.004 ↗
16. Microstructure and mechanical properties of refractory MoNbHfZrTi high-entropy alloy10.1016/j.matdes.2015.05.019 ↗
17. Simultaneously increasing the strength and ductility of a refractory high-entropy alloy via grain refining10.1016/j.matlet.2016.08.060 ↗
18. Microstructure and mechanical properties at elevated temperatures of a new Al-containing refractory high-entropy alloy Nb-Mo-Cr-Ti-Al10.1016/j.jallcom.2015.11.050 ↗
19. Microstructure and wear behavior of a refractory high entropy alloy10.1016/j.ijrmhm.2016.02.006 ↗
20. Effect of Al addition on the microstructure, mechanical and wear properties of TiZrNbHf refractory high entropy alloys10.1016/j.triboint.2021.107031 ↗
21. Deformation and tribological behavior of ductile refractory high-entropy alloys10.1016/j.wear.2021.203916 ↗
22. High temperature wear behavior of refractory high entropy alloys based on 4-5-6 elemental palette10.1016/j.jallcom.2020.156004 ↗
23. A novel refractory WMoVCrTa high-entropy alloy possessing fine combination of compressive stress-strain and high hardness properties10.1016/j.apt.2020.10.008 ↗
24. Processing and characterization of W23Mo23V17Cr8Ta7Fe22 and WMoVCrTa refractory high entropy alloys10.1016/j.ijrmhm.2021.105656 ↗
25. Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings10.1016/j.wear.2004.09.041 ↗
26. Determination of structural, tribological, isothermal oxidation and corrosion properties of Al–Co–Cr–Fe–Ni–Ti–Cu high-entropy alloy10.1016/j.vacuum.2021.110072 ↗
27. Hutchings · 199210.1016/0261-3069(92)90241-9 ↗
28. Rabinowicz · 1995
29. Effect of normal load and sliding velocity on friction coefficient of aluminum sliding against different pin materials10.5923/j.materials.20120201.05 ↗
30. Jeyaprakash · 1992
31. Mechanical properties and wear behavior of stir cast aluminum metal matrix composite: a review
32. Dry sliding wear and microstructural behavior of stir-cast Al6061-based composite reinforced with cerium oxide and graphene nanoplatelets10.1016/j.wear.2022.204615 ↗
33. High-temperature dry sliding wear behavior of hybrid aluminum composite reinforced with ceria and graphene nanoparticles10.1016/j.engfailanal.2023.107426 ↗