Designing a self-healing protective film on a lithium metal anode for long-cycle-life lithium-oxygen batteries
Source abstract
Abstract
Abstract The development of high energy density Li-O2 batteries is hindered by many scientific and technological challenges, especially the intrinsic corrosion of the lithium metal anode induced by O2, H2O and discharge intermediates in electrolytes. In response, as a proof-of-concept experiment, we first propose and demonstrate a facile and highly efficient strategy for the in situ growth of a self-healing protective film on a lithium metal anode, wherein tetraethyl orthosilicate plays a key role as a novel film-forming electrolyte additive. This additive can spontaneously and effectively react with the main component of the detrimental surface corrosion layer (lithium hydroxide) on the lithium metal anode, forming a self-healing protective film with dynamic repair ability during the cycling process. Unexpectedly, the protected lithium metal anode endows the Li-O2 batteries with significantly improved battery cycle performance (up to 144 cycles). We consider that our facile, low-cost, and highly effective lithium protection strategy presents a new avenue to address the daunting corrosion problem of lithium metal anodes in Li-O2 batteries, which can be easily extended to other metal-O2 battery systems such as Na-O2 batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Building better batteries
2. Li-O2 and Li-S batteries with high energy storage10.1038/nmat3191 ↗
3. Oxygen reduction reaction promotes Li+ desorption from cathode surface in Li-O2 batteries10.1002/admi.201500369 ↗
4. Designer interphases for the lithium-oxygen electrochemical cell10.1126/sciadv.1602809 ↗
5. Sustainability and in situ monitoring in battery development10.1038/nmat4777 ↗
6. A facile surface chemistry route to a stabilized lithium metal anode10.1038/nenergy.2017.119 ↗
7. Next-generation lithium metal anode engineering via atomic layer deposition10.1021/acsnano.5b02166 ↗
8. Chemical aspect of oxygen dissolved in a dimethyl sulfoxide-based electrolyte on lithium metal10.1016/j.electacta.2014.01.042 ↗
9. The effect of oxygen crossover on the anode of a Li-O2 battery using an ether-based solvent: insights from experimental and computational studies10.1002/cssc.201200810 ↗
10. The SEI layer formed on lithium metal in the presence of oxygen: a seldom considered component in the development of the Li–O2 battery10.1016/j.jpowsour.2012.10.011 ↗
11. Reversibility of anodic lithium in rechargeable lithium–oxygen batteries10.1038/ncomms3255 ↗
12. Large-scale Li-O2 pouch type cells for practical evaluation and applications10.1002/adfm.201605500 ↗
13. Li metal utilization in lithium air rechargeable batteries10.1016/j.jpowsour.2013.01.049 ↗
14. Graphitized carbon fibers as multifunctional 3D current collectors for high areal capacity Li anodes10.1002/adma.201700389 ↗
15. Chemical dealloying derived 3D porous current collector for Li metal anodes10.1002/adma.201601409 ↗
16. Accommodating lithium into 3D current collectors with a submicron skeleton towards long-life lithium metal anodes10.1038/ncomms9058 ↗
17. Lithium batteries with nearly maximum metal storage10.1021/acsnano.7b02731 ↗
18. A moisture- and oxygen-impermeable separator for aprotic Li-O2 batteries10.1002/adfm.201504437 ↗
19. Sustainable redox mediation for lithium-oxygen batteries by a composite protective layer on the lithium-metal anode10.1002/adma.201503169 ↗
20. Hybrid Li Ion conducting membrane as protection for the Li anode in an aqueous Li–Air battery: coupling sol–gel chemistry and electrospinning10.1021/acs.langmuir.7b00675 ↗
21. Artificial protection film on lithium metal anode toward long-cycle-life lithium-oxygen batteries10.1002/adma.201501490 ↗
22. A lithium-oxygen battery with a long cycle life in an air-like atmosphere10.1038/nature25984 ↗
23. Understanding the chemical stability of polymers for lithium–air batteries10.1021/cm5040003 ↗
24. Protection of lithium metal surfaces using tetraethoxysilane10.1039/C0JM02305A ↗
25. Fabrication of hybrid silicate coatings by a simple vapor deposition method for lithium metal anodes10.1002/aenm.201701744 ↗
26. In situ construction of stable tissue-directed/reinforced bifunctional separator/protection film on lithium anode for lithium-oxygen batteries10.1002/adma.201606552 ↗
27. Carbon supported TiN nanoparticles: an efficient bifunctional catalyst for non-aqueous Li-O2 batteries10.1039/c2cc37042e ↗
28. Influence of nonaqueous solvents on the electrochemistry of oxygen in the rechargeable lithium−air battery10.1021/jp102019y ↗
29. Enhanced cycle stability of rechargeable Li-O2 batteries by the synergy effect of a LiF protective layer on the Li and DMTFA additive10.1021/acsami.7b05466 ↗
30. Enhancing metallic lithium battery performance by tuning the electrolyte solution structure10.1039/C7TA08274F ↗
31. Influence of Li2O2 morphology on oxygen reduction and evolution kinetics in Li–O2 batteries10.1039/c3ee40998h ↗
32. Lithium–oxygen batteries: bridging mechanistic understanding and battery performance10.1039/c3ee23966g ↗
33. Mechanisms of morphological evolution of Li2O2 particles during electrochemical growth10.1021/jz4003586 ↗
34. 3D flexible carbon felt host for highly stable sodium metal anodes10.1002/aenm.201702764 ↗
35. Predicting solvent stability in aprotic electrolyte Li-air batteries: nucleophilic substitution by the superoxide anion radical (O2-)10.1021/jp2073914 ↗
36. Stability of superoxide radicals in glyme solvents for non-aqueous Li-O2 battery electrolytes10.1039/c3cp51531a ↗
37. Stability of solvents against superoxide radical species for the electrolyte of lithium-air battery10.1149/2.010201eel ↗
38. The lithium-oxygen battery with ether-based electrolytes10.1002/anie.201102357 ↗