journal article·2020-09

High performance and carbon-deposition resistance metal-supported solid oxide fuel cell with a nickel–manganese spinel modified anode

Q. Li, X. Wang, L. Jia, B. Chi, J. Pu, J. Li

Publisher page

Abstract

Abstract To achieve high performance and carbon-deposition resistance, solid oxide fuel cells (SOFCs) with a nickel-10 wt% iron alloy support, a 10 wt% gadolinium doped cerium oxide electrolyte (GDC), a La0.6Sr0.4Co0.2Fe0.8O3-GDC (LSCF-GDC) cathode, and a Ni-GDC anode with (modified anode cell, MAC) or without (conventional anode cell, CAC) NiMn2O4 modification are prepared and evaluated with H2 and CH4 fuels. During the cell fabrication, the GDC in the anode of MAC is doped by Mn and Fe through reaction with NiMn2O4 and Fe diffusion from the support with increased electrical conductivity and catalytic activity; and the Ni granules in the anode is decorated with fine MnO particles, which increases their porosity and resistance to agglomeration and carbon deposition. As a result, MAC demonstrates higher performance and durability than CAC, with a maximum power density of 1278 and 1208 mW cm−2 at 700 °C with H2 and CH4 as the fuel, respectively, in contrast to 998 and 895 mW cm−2 for CAC. And the cell voltage of MAC fueled by CH4 is maintained on the level of 0.66 V for up to 100 h at 650 °C without carbon deposition in the anode, while that of CAC decreases continuously with significant carbon formation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Performance of metal-supported SOFCs with infiltrated electrodes10.1016/j.jpowsour.2007.06.076 ↗
2. Enhanced stability of Ni–Fe/GDC solid oxide fuel cell anodes for dry methane fuel10.1016/j.catcom.2010.07.014 ↗
3. YSZ-based SOFC with modified electrode/electrolyte interfaces for operating at temperature lower than 650°C10.1016/j.jpowsour.2008.01.066 ↗
4. Fabrication and evaluation of Ni-GDC composite anode prepared by aqueous-based tape casting method for low-temperature solid oxide fuel cell10.1016/j.ijhydene.2009.09.101 ↗
5. Direct oxidation of hydrocarbons in a solid-oxide fuel cell10.1038/35005040 ↗
6. Anodes for direct oxidation of dry hydrocarbons in a solid-oxide fuel cell10.1002/1521-4095(200010)12:19<1465::AID-ADMA1465>3.0.CO;2-9 ↗
7. Catalytic steam reforming of methane, methanol, and ethanol over Ni/YSZ: the possible use of these fuels in internal reforming SOFC10.1016/j.jpowsour.2006.10.006 ↗
8. Comparison of the performance of Cu–CeO2–YSZ and Ni–YSZ composite SOFC anodes with H2, CO, and syngas10.1016/j.jpowsour.2004.09.022 ↗
9. Electrochemical performance and carbon deposition resistance of M-BaZr0.1Ce0.7Y0.1Yb0.1O3-δ (M= Pd, Cu, Ni or NiCu) anodes for solid oxide fuel cells10.1038/srep07667 ↗
10. First-principles modeling of Ni4M (M= Co, Fe, and Mn) alloys as solid oxide fuel cell anode catalyst for methane reforming10.1021/acs.jpcc.5b06847 ↗
11. Enhanced electrochemical performance of BaZr0.1Ce0.7Y0.1Yb0.1O3−δ electrodes for hydrogen and methane oxidation in solid oxide fuel cells by Pd or Cu0.5Pd0.5 impregnation10.1016/j.jpowsour.2011.10.082 ↗
12. Pd-promoted (La, Ca)(Cr, Mn) O3/GDC anode for hydrogen and methane oxidation reactions of solid oxide fuel cells10.1016/j.ssi.2010.06.042 ↗
13. Au-doped Ni/GDC as a new anode for SOFCs operating under rich CH4 internal steam reforming10.1016/j.ijhydene.2010.05.038 ↗
14. An octane-fueled solid oxide fuel cell10.1126/science.1109213 ↗
15. Investigations of mesoporous CeO2-Ru as a reforming catalyst layer for solid oxide fuel cells10.1016/j.elecom.2006.03.018 ↗
16. Enhanced electrochemical performance and carbon deposition resistance of Ni-YSZ anode of solid oxide fuel cells by in situ formed Ni-MnO layer for CH4 on-cell reforming10.1039/C3TA12766D ↗
17. Biogas to syngas: flexible on-cell micro-reformer and NiSn bimetallic nanoparticle implanted solid oxide fuel cells for efficient energy conversion10.1039/C6TA00532B ↗
18. Stability and performance of SOFC with SrTiO3-based anode in CH4 fuel10.1016/j.ssi.2012.05.017 ↗
19. SOFC anodes based on infiltration of La0. 3Sr0. 7TiO310.1149/1.2976775 ↗
20. Electrical conductivity and performance of doped LaCrO3 perovskite oxides for solid oxide fuel cells10.1016/j.jpowsour.2007.10.053 ↗
21. Synthesis and characterization of (La0. 75Sr0. 25) Cr0. 5Mn0. 5 O3− δ, a redox-stable, efficient perovskite anode for SOFCs10.1149/1.1639161 ↗
22. Disruption of extended defects in solid oxide fuel cell anodes for methane oxidation10.1038/nature04438 ↗
23. Direct CH4 fuel cell using Sr2FeMoO6 as an anode material10.1016/j.jpowsour.2011.03.053 ↗
24. Double-perovskites A2FeMoO6−δ (A=Ca, Sr, Ba) as anodes for solid oxide fuel cells10.1016/j.jpowsour.2010.04.021 ↗
25. Latest development of double perovskite electrode materials for solid oxide fuel cells: a review10.1007/s11708-019-0651-x ↗
26. Sr2NiMoO6−δ as anode material for LaGaO3-based solid oxide fuel cell10.1016/j.elecom.2008.07.005 ↗
27. Evaluation of porous 430L stainless steel for SOFC operation at intermediate temperatures10.1016/j.jpowsour.2007.10.009 ↗
28. High performance metal-supported solid oxide fuel cells fabricated by thermal spray10.1016/j.jpowsour.2009.02.067 ↗
29. Ni–Fe alloy-supported intermediate temperature SOFCs using LaGaO3 electrolyte film for quick startup10.1115/1.2930763 ↗
30. Progress in metal-supported solid oxide fuel cells: a review10.1016/j.jpowsour.2010.02.035 ↗
31. Porous nickel-iron alloys as anode support for intermediate temperature solid oxide fuel cells: II. Cell performance and stability10.1016/j.ijhydene.2018.09.142 ↗
32. Methane on-cell reforming in nickel–iron alloy supported solid oxide fuel cells10.1016/j.jpowsour.2015.03.062 ↗
33. A Ce(Mn,Fe)O2 dense nanofilm as an improved active anode for metal-supported solid oxide fuel cells10.1039/c3ra40257f ↗