High-performance anion exchange membrane water electrolysis by polysulfone grafted with tetramethyl ammonium functionalities
Source abstract
Abstract
'Green' hydrogen production using anion exchange membrane (AEM) water electrolysis is one of the most promising approaches to address the severe energy crisis facing human society. However, to enable commercially viable hydrogen generation, huge improvement in the AEM technology is imperative, including membrane stability, higher operating temperature, ion conductivity, power performance, and cost reduction. Herein, a novel anion conductive membrane for water electrolysis is synthesized using low-cost and eco-friendly polysulfone as the base polymer, while chemical grafting of quaternary ammonium functionalities has been exploited to confer anion conductive properties. The physicochemical features, the mechanical properties, and the electrochemical performance were widely investigated by a combination of various techniques including DMA, pulsed field gradient nuclear magnetic resonance spectroscopy, electrochemical impedance spectroscopy, and linear sweep voltammetry in an electrolysis cell. The quaternary-ammonium-modified polysulfone (qPSU) membrane exhibited impressive hydrolytic and mechanical stabilities as a result of a nanophase segregation between hydrophilic/hydrophobic domains in such electrolytes. The latter feature enables the formation of wide percolating ion clusters in the qPSU AEM, which form a highly interconnected pathway for efficient hydroxide conduction. Water electrolysis single cells equipped with this membrane reached the remarkable current density of 4.2 A/cm at 2.2 V and 90 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced battery technologies research · Membrane-based Ion Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. Global low-carbon energy transition in the post-COVID-19 era
2. 2021 · 386
3. Water will Be the coal of the future—the untamed dream of Jules Verne for a solar fuel10.3390/molecules21121638 ↗
4. Highly reversible water splitting cell building from hierarchical 3D nickel manganese oxyphosphide nanosheets10.1016/j.nanoen.2019.104432 ↗
5. Earth-abundant catalysts for electrochemical and photoelectrochemical water splitting10.1038/s41570-016-0003 ↗
6. Hydrogen production from the air10.1038/s41467-022-32652-y ↗
7. Anion-exchange membranes in electrochemical energy systems10.1039/C4EE01303D ↗
8. Blend membranes of polybenzimidazole and an anion exchange ionomer (FAA3) for alkaline water electrolysis: improved alkaline stability and conductivity10.1016/j.memsci.2018.07.074 ↗
9. ScienceDirect Recent development in electrocatalysts for hydrogen production through water electrolysis10.1016/j.ijhydene.2021.06.191 ↗
10. Assessment of the FAA3-50 polymer electrolyte in combination with a NiMn2O4 anode catalyst for anion exchange membrane water electrolysis10.1016/j.ijhydene.2020.01.150 ↗
11. ScienceDirect Development of efficient membrane electrode assembly for low cost hydrogen production by anion exchange membrane electrolysis
12. Corrosion-engineered bimetallic oxide electrode as anode for high-efficiency anion exchange membrane water electrolyzer10.1016/j.cej.2020.127670 ↗
13. Nano Energy the promise of hydrogen production from alkaline anion exchange membrane electrolyzers
14. Electrochemistry Communications Non-precious electrocatalysts for oxygen evolution reaction in anion exchange membrane water electrolysis : a mini review10.1016/j.elecom.2021.107118 ↗
15. Comparative study of anion exchange membranes for low-cost water electrolysis10.1016/j.ijhydene.2019.11.011 ↗
16. High-performance anion-exchange membrane water electrolysis10.1016/j.electacta.2018.10.143 ↗
17. Electrochimica Acta on the effect of temperature and surface oxidation on the kinetics of hydrogen electrode reactions on nickel in alkaline media10.1016/j.electacta.2018.02.106 ↗
18. Highly conductive mechanically robust high M w polyfluorene anion exchange membrane for alkaline fuel cell and water electrolysis application10.1039/D0PY00334D ↗
19. ScienceDirect Study on the effect of the degree of grafting on the performance of polyethylene-based anion exchange membrane for fuel cell application10.1016/j.ijhydene.2015.10.108 ↗
20. ScienceDirect Pendent piperidinium-functionalized blend anion exchange membrane for fuel cell application10.1016/j.ijhydene.2019.04.172 ↗
21. Development of imidazolium-type alkaline anion exchange membranes for fuel cell application10.1016/j.memsci.2012.05.006 ↗
22. Crosslinked norbornene copolymer anion exchange membrane for fuel cells10.1016/j.memsci.2018.03.080 ↗
23. Quantifying the critical effect of water diffusivity in anion exchange membranes for fuel cell applications
24. Imidazolium functionalized polysulfone anion exchange membrane for fuel cell application10.1039/c1jm10656b ↗
25. Twisted ether-free polymer based alkaline membrane for high-performance water electrolysis10.1016/j.jpowsour.2020.228805 ↗
26. Solid-state water electrolysis with an alkaline membrane10.1021/ja302439z ↗
27. Hydrogen production by water electrolysis with an ultrathin anion-exchange membrane (AEM)10.20964/2018.12.84 ↗
28. Development of efficient membrane electrode assembly for low cost hydrogen production by anion exchange membrane electrolysis10.1016/j.ijhydene.2017.03.069 ↗
29. Effect of LDH platelets on the transport properties and carbonation of anion exchange membranes10.1016/j.electacta.2021.139713 ↗
30. Anionic conducting composite membranes based on aromatic polymer and layered double hydroxides10.1016/j.ijhydene.2016.11.030 ↗
31. Development of polymeric membranes based on quaternized polysulfones for AMFC applications10.3390/polym12020283 ↗
32. Hydrophilic side chain assisting continuous ion-conducting channels for anion exchange membranes10.1016/j.memsci.2018.02.020 ↗
33. Polysulfone grafted with anthraquinone-hydroanthraquinone redox as a flexible membrane electrode for aqueous batteries10.1016/j.polymer.2021.124245 ↗
34. Quaternary ammonium-functionalized polysulfone sorbent: toward a selective and reversible trap-release of Co210.1016/j.jcou.2022.102259 ↗
35. ScienceDirect Profile of extended chemical stability and mechanical integrity and high hydroxide ion conductivity of poly (ether imide) based membranes for anion exchange membrane fuel cells
36. Science of the Total Environment Fabrication and characterization of pyridinium functionalized anion exchange membranes for acid recovery10.1016/j.scitotenv.2019.05.481 ↗
37. Hexagonal mesoporous silica for carbon capture: unrevealing CO2 microscopic dynamics by nuclear magnetic resonance10.1016/j.jcou.2021.101809 ↗
38. Enhancing proton conductivity and methanol resistance of SPAEK membrane by incorporating MOF with flexible alkyl sulfonic acid for DMFC10.1016/j.memsci.2021.119906 ↗
39. A facile approach to fabricating organosilica layered material with sulfonic groups as an efficient filler for polymer electrolyte nanocomposites10.1039/C7NJ01416C ↗
40. Alkali-stable partially fluorinated poly(arylene ether) anion exchange membranes with a claw-type head for fuel cells10.1039/C8TA03437K ↗
41. Theoretical methodology for calculating water uptake and ionic exchange capacity parameters of ionic exchange membranes with applications in fuel cells10.1016/j.ijhydene.2015.03.046 ↗
42. Toward optimization of a robust low-cost sulfonated-polyethersulfone containing layered double hydroxide for PEM fuel cells
43. Study on the chemical stabilities of poly(arylene ether) random copolymers for alkaline fuel cells: effect of main chain structures with different monomer units10.1021/acssuschemeng.9b05934 ↗
44. Sulfonated polyethersulfone/polyetheretherketone blend as high performing and cost-effective electrolyte membrane for direct methanol fuel cells10.1016/j.renene.2020.06.053 ↗
45. High performance porous polybenzimidazole membrane for alkaline fuel cells10.1016/j.ijhydene.2014.08.134 ↗
46. C2 and N3 substituted imidazolium functionalized poly(arylene ether ketone) anion exchange membrane for water electrolysis with improved chemical stability10.1016/j.memsci.2019.03.060 ↗
47. Electrochemical impedance spectroscopy as a diagnostic tool in polymer electrolyte membrane electrolysis10.3390/ma11081368 ↗
48. Optimal operating conditions evaluation of an anion-exchange-membrane electrolyzer based on FUMASEP® FAA3-50 membrane
49. High-performance anion exchange membrane water electrolyzers with a current density of 7.68 A cm-2and a durability of 1000 hours10.1039/D1EE02642A ↗
50. Graphitic carbon nitride-carbon nanofiber as oxygen catalyst in anion-exchange membrane water electrolyzer and rechargeable metal–air cells10.1016/j.apcatb.2018.05.073 ↗
51. Electrospun NiMn2O4 and NiCo2O4 spinel oxides supported on carbon nanofibers as electrocatalysts for the oxygen evolution reaction in an anion exchange membrane-based electrolysis cell10.1016/j.ijhydene.2019.02.214 ↗
52. Assessment of the FAA3-50 polymer electrolyte in combination with a NiMn 2 O 4 anode catalyst for anion exchange membrane water electrolysis
53. A study on electrode fabrication and operation variables affecting the performance of anion exchange membrane water electrolysis
54. Aquivion®-based anionic membranes for water electrolysis10.1016/j.electacta.2022.139834 ↗
55. The effect of membrane on an alkaline water electrolyzer10.1016/j.ijhydene.2017.10.050 ↗
56. Cyclic ammonium grafted poly (arylene ether ketone) hydroxide ion exchange membranes for alkaline water electrolysis with high chemical stability and cell efficiency10.1016/j.electacta.2018.03.117 ↗
57. Carbon dioxide and water electrolysis using new alkaline stable anion membranes
58. Poly(carbazole)-based anion-conducting materials with high performance and durability for energy conversion devices10.1039/D0EE01842B ↗
59. Next-generation anion exchange membrane water electrolyzers operating for commercially relevant lifetimes10.1016/j.ijhydene.2020.10.244 ↗