journal article·2025Open access

Multi-attribute recursive optimization (MARO) for EDM of D3 tool steel

Rekha Rajasekaran, Rajesh Pinnavasal Venukrishnan, Baskar Neelakandan, Varatharajulu Muthukrishnan

Abstract

ABSTRACT Electric Discharge Machining (EDM) is one of the most effective unconventional material removal techniques that mill electrically conductive objects, despite their hardness using electrical discharge. This elite method provides excellent accuracy and surface finish within short duration. The presented research envisages to study the effect of process variables of EDM namely Pulsating Current (I), Pulse-on-time (Ton) and Pulse-off time (Toff) on machining performance measures namely Tool Wear Rate (TWR), Surface Roughness (SR) and Material Removal Rate (MRR). The best possible condition for specimen selection is presented by a new technique known as Multi Attribute Recursive Optimization (MARO). The optimal experimental conditions were found with Ton 100 s, Toff 49.82 s, and I 4.99 A, with ideal responses of SR 0.057 µm, MRR 0.036 g/min, and TWR 3.301 g/min. For the best run identification, the METHod for Enrichment Evaluation, Preference Ranking Organization METHod (PROME-THEE) was used while Historical Data Design (HDD) was used to validate the result obtained. The integration of PROMETHEE and HDD known as MARO is identified to appreciate degree of the methods analyzed. The close convergence of PROMETHEE and HDD at 97% guarantees the accuracy of the proposed MARO technique.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Industrial Vision Systems and Defect Detection · Advanced machining processes and optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Saranathan College of Engineering, India

References (29)

Show source-provided references
1. “An experimental investigation of machining aluminum alloy Al5052 with EDM”10.1016/j.promfg.2019.09.071 ↗
2. “Multi-objective optimization of EDM parameters using grey relational analysis for titanium alloy (Ti–6Al–4V)”10.4028/www.scientific.net/AMM.592-594.540 ↗
3. “Experimental study on the influence of machining conditions on the quality of electrical discharge machined surfaces of aluminum alloy Al5052”10.3390/machines8010012 ↗
4. “Machining of aluminium metal matrix composites with electrical discharge machining-a review”
5. “A review paper on EDM parameter of composite material and industrial demand material machining”
6. “Electrical discharge machining of 6061 aluminium alloy”10.1016/S1003-6326(15)63912-7 ↗
7. “Grey relational analysis based multiresponse optimization for WEDM of ZE41A magnesium alloy”10.1016/j.ijlmm.2022.06.003 ↗
8. “Optimization of machining parameters in WEDM of AISI D3 Steel using Taguchi Technique”10.1016/j.procir.2014.03.080 ↗
9. “ANN and RSM based predictive model development and EDM process parameters optimization on AISI 304 stainless steel”
10. “Optimization of electrical discharge machining parameters of aluminium hybrid composites using Taguchi method”
11. 2011
12. “Modeling and analysis of machining parameters for surface roughness in powder mixed EDM using RSM approach”
13. “EDM of aluminum alloy 6061 using graphite electrode using paraffin oil and distilled water as dielectric medium”10.12913/22998624/73821 ↗
14. “Optimization of WEDM parameters using Taguchi technique and response surface methodology in machining of AISI D2 steel”10.1016/j.proeng.2014.12.310 ↗
15. “Experimental analysis and optimization of EDM parameters on HcHcr steel in context with different electrodes and dielectric fluids using hybrid taguchi-based PCA-utility and CRITIC-utility approaches”10.3390/met11030419 ↗
16. “Optimization of cylindrical grinding process parameters on austenitic stainless steel 304 using Taguchi based Grey Relational Analysis”
17. “Optimization of cylindrical grinding process parameters using meta-heuristic algorithms”
18. “Investigation on the mechanical properties of coated carbide ceramic inserts for EDM using Inconel 800”10.1590/1517-7076-rmat-2024-0255 ↗
19. VIJAY M. · 2010 · 59
20. “Outranking methods: Promethee I and promethee II”10.2478/fman-2020-0008 ↗
21. “Best criteria selection based PROMETHEE II method”10.1007/s12597-020-00464-7 ↗
22. “PROMETHEE II: a knowledge-driven method for copper exploration”10.1016/j.cageo.2011.12.012 ↗
23. BRANS J.-P. · 2016 · 187
24. “Experimental investigation and optimization of non-catalytic in-situ biodiesel production from rice bran using response surface methodology historical data design”10.14710/ijred.2021.34138 ↗
25. “Analysis of factor effects and interactions in a conventional drilling operation by response surface methodology and historical data design”
26. “Taguchi-based and intelligent optimisation of a multi-response process using historical data”10.5545/sv-jme.2010.061 ↗
27. ANDERSON M.J. · 2016
28. “Prediction of moment capacity of ferrocement composites with chicken mesh and steel slag using response surface methodology and artificial neural network”10.1590/1517-7076-rmat-2023-0364 ↗
29. “Decision making for facility location selection using PROMETHEE II method.”