Temperature and annealing time influences on cross-rolled 7475-T7351 aluminum alloy
Source abstract
Abstract
During production and heat treatments of aluminum alloys, numerous second phase particles form, which maximizes their mechanical properties. This work aimed to perform a correlation between Vickers hardness and X-ray diffraction results, when 7475-T7351 aluminum alloy processed by the cross rolling is subjected to annealing heat treatments (AHT) at 500 °C for different soaking times (15, 30 and 60 minutes) and for a soaking time of 15 minutes at different temperatures (200, 300 and 400 °C). The influence of the AHT (500 °C / 15 minutes) on the microstructure, via scanning and transmission electron microscopy, and tensile tests properties was also investigated. The results show evidence that the Vickers hardness decreased for AHT performed at 200 and 300 °C / 15 minutes and increase for greater temperatures and times. This behavior is probably due to modifications in the constituent/dispersoid particles and aluminum matrix observed from the X-ray analysis. Partial recrystallization and a coarsening of the precipitates was observed after the AHT at 500 °C / 60 minutes, whose brought harmful effects on the tensile mechanical properties.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Centro Federal de Educação Tecnológica Celso Suckow da Fonseca, Brasil
Instituto Militar de Engenharia, Brasil
References (33)
Show source-provided references
1. Recent advances in the development of aerospace materials10.1016/j.paerosci.2018.01.001 ↗
2. 1990 · 2
3. BRAGA A.P.V. · 2011
4. Heat treatment of 7xxx series aluminium alloys - some recent developments10.1016/S1003-6326(14)63306-9 ↗
5. The effect of cu addition on the precipitation and redissolution in Al–Zn–Mg alloy by the differential dilatometry10.1016/j.jallcom.2009.05.082 ↗
6. Recent developments in advanced aircraft aluminium alloys10.1016/j.matdes.2013.12.002 ↗
7. Structural characterization of the rolled and annealed 7475 aluminium alloy
8. 1991 · 4
9. 2017
10. Microstructure and mechanical properties evaluation after annealing heat treatment of 7475-t7351 alluminum alloy10.34117/bjdv8n8-072 ↗
11. TOTTEN G.E. · 2003
12. 2004 · 9
13. Microstructure and mechanical characterization of an Al-Zn-Mg alloy after various heat treatments and room temperature deformation10.4028/www.scientific.net/MSF.604-605.67 ↗
14. Calorimetric and resistivity study of formation and redissolution of precipitates in 7050 aluminium alloy10.2320/matertrans1989.39.69 ↗
15. Dislocation density by x-ray diffraction in α brass deformed by rolling and ECAE10.1590/1516-1439.369214 ↗
16. PADILHA A.F. · 2005
17. HUMPHREYS F.J. · 2004
18. Avaliação da homogeneidade estrutural em liga de alumínio 7475-T7351 submetida a laminação convencional e assimétrica10.4322/2176-1523.1572 ↗
19. On the mechanical behavior of an Al 7075 alloy deformed by asymmetrical and conventional rolling
20. Pre and post-welding annealing influence on the microstructure of a 7475-T7351 aluminum alloy joining by friction stir welding
21. Polarized Light Microscopy: Utilization in the investigation of the recrystallization of aluminum alloys10.1016/j.matchar.2003.10.010 ↗
22. Formation of textures and microstructures in asymmetrically cold rolled and subsequently annealed aluminum alloy 1100 sheets10.1023/B:JMSC.0000039246.72708.0a ↗
23. Microstructural evaluation of an asymmetrically rolled and recrystallized 3105 aluminum alloy10.1016/j.jmrt.2016.02.001 ↗
24. 2012
25. Evolução microestrutural de uma liga de alumínio 7475-T7351 submetida a laminação cruzada e recristalizada com diferentes tempos de encharque”
26. 2016
27. TOTTEN G.E. · 2003
28. Influence of Cu on microstructure and tensile properties of 7XXX series aluminum alloy10.1016/j.matdes.2014.05.003 ↗
29. Recozimento da liga de alumínio AA 7075 após laminação a frio
30. Thermal conductivity of the Mg–Al–Zn alloys: experimental measurement and calphad modeling10.1016/j.calphad.2018.05.011 ↗
31. CULLITY B. · 1956
32. LADD M. · 2013
33. Mechanical behaviour of AA 7475 friction stir welds with the kissing bond defect10.1016/j.ijfatigue.2014.12.011 ↗