journal article·2021-04

Modeling the dynamic bending of rigid-plastic fiber-reinforced laminated curvilinear doubly connected thin plates with free outer contour

Tatiana Pavlovna Romanova

Publisher page

Abstract

A theoretical model of the dynamic bending of rigid-plastic hybrid composite, arbitrary curvilinear doubly connected thin plates is developed. Inner contour of the plate is simply supported or clamped and outer one is free. The plates are on a viscous basis and under the action of uniformly distributed loads of explosive type. The plates are laminated and fibrous, with layers arranged symmetrically with respect to the middle surface. In each layer the reinforcing fibers, made of different materials, are located in directions parallel or normal to inner contour of plate. The structural model of the reinforced layer considering the plane stress state in fibers is used. The equations of the dynamic deformation of plate and simple analytical formula for the limit load are obtained. Numerical examples are given for a fiber-reinforced four-layered curvilinear plate with a supported hole in the form of ellipse and super-ellipse at the same total amount of reinforcement.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Composite Structure Analysis and Optimization · Mechanical Behavior of Composites · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory of Fast Processes Physics, Khristianovich Institute of Theoretical and Applied Mechanics of the Siberian Branch of the Russian Academy of Sciences, Russia

References (38)

Show source-provided references
1. 10.1007/s10958-013-1421-710.1007/s10958-013-1421-7 ↗
2. 10.7242/1999-6691/2016.9.3.2410.7242/1999-6691/2016.9.3.24 ↗
3. 10.1007/s11029-014-9409-z10.1007/s11029-014-9409-z ↗
4. 10.1016/j.ijimpeng.2014.01.00410.1016/j.ijimpeng.2014.01.004 ↗
5. 10.1016/j.ijimpeng.2017.01.01710.1016/j.ijimpeng.2017.01.017 ↗
6. 10.1533/saos.2005.000710.1533/saos.2005.0007 ↗
7. 10.1016/j.compstruct.2016.02.03610.1016/j.compstruct.2016.02.036 ↗
8. 10.1177/030932471244829910.1177/0309324712448299 ↗
9. 10.1007/BF0158782710.1007/BF01587827 ↗
10. Nemirovsky Yu V · 2009
11. 10.1243/03093247JSA61110.1243/03093247JSA611 ↗
12. 10.1016/j.ijimpeng.2017.04.00410.1016/j.ijimpeng.2017.04.004 ↗
13. 10.1016/j.ijimpeng.2017.09.01110.1016/j.ijimpeng.2017.09.011 ↗
14. Gvozdev AA. · Stroitel’naya promyshlennost’ · 1943
15. Johansen KW. · 1943
16. 10.1680/macr.2008.60.8.54910.1680/macr.2008.60.8.549 ↗
17. Megson THG · 2014
18. 10.1098/rspa.2014.007110.1098/rspa.2014.0071 ↗
19. 10.1007/BF0090743410.1007/BF00907434 ↗
20. 10.1007/s11029-019-9777-510.1007/s11029-019-9777-5 ↗
21. 10.1061/(ASCE)EM.1943-7889.000124310.1061/(ASCE)EM.1943-7889.0001243 ↗
22. Kostrik VK · 1982 · 55 · 133
23. Nemirovsky Yu V · 197
24. Nemirovsky Yu V, Fedorova NA. Mathematical modeling of planar structures of reinforced fibrous materials. Krasnoyarsk: Izd. SFU, 2010 [in Russian].
25. 10.1007/s00158-007-0113-710.1007/s00158-007-0113-7 ↗
26. 10.1115/1.315757810.1115/1.3157578 ↗
27. Lenos S. · HERON · 1983 · 28 · 1
28. Romanova TP. · PNRPU Mechanics Bulletin · 2017 · 3 · 167
29. 10.1080/0305215X.2016.125605210.1080/0305215X.2016.1256052 ↗
30. 10.3103/S002565441801011910.3103/S0025654418010119 ↗
31. 10.2514/3.1069710.2514/3.10697 ↗
32. 10.1177/002199831350206610.1177/0021998313502066 ↗
33. Keil AH · 1961 · 22
34. 10.1016/0020-7683(71)90078-310.1016/0020-7683(71)90078-3 ↗
35. Romanova TP. · PNRPU Mechanics Bulletin · 2015 · 3 · 114
36. 10.1016/j.oceaneng.2017.06.03210.1016/j.oceaneng.2017.06.032 ↗
37. 10.1115/1.301382410.1115/1.3013824 ↗
38. 10.1016/j.tws.2016.06.01210.1016/j.tws.2016.06.012 ↗