journal article·2017-02

Measurement of Elastic Properties of Epoxy Molding Compound by Single Cylindrical Configuration with Embedded Fiber Bragg Grating Sensor

Y. Sun, H.-S. Lee, B. Han

Experimental Mechanics· Volume 57· Issue 2
Publisher page

Abstract

We propose a novel experimental method, based on a fiber Bragg grating (FBG) sensor, to measure the elastic properties of epoxy molding compound (EMC) from a single specimen configuration. The FBG sensor is embedded in the center of a cylindrical EMC specimen, and deforms together with the EMC. The Bragg wavelength (BW) shifts are documented during compressive and hydrostatic loadings. Young’s modulus and bulk modulus are determined from the BW shifts using the relationships between the elastic constants and the BW shift. Two major developments to accommodate the unique requirements of EMC testing include: (1) a large mechanical pressure to be applied during curing; and (2) a very high gas pressure required for hydrostatic testing. The shear modulus and Poisson’s ratio are calculated from the two measured constants to provide a complete set of elastic properties of EMC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Fiber Optic Sensors · Epoxy Resin Curing Processes · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Kelly G, Lyden C, Lawton W, Barrett J, Saboui A, Pape H, Peters HJ (1996) Importance of molding compound chemical shrinkage in the stress and warpage analysis of PQFPs. Components Packag Manuf Technol B IEEE Trans Adv Packag 19:296–30010.1109/96.496032 ↗
2. Kong JW, Kim J-K, Yuen MM (2003) Warpage in plastic packages: effects of process conditions, geometry and materials. IEEE Trans Electron Packag Manuf 26:245–25210.1109/TEPM.2003.820806 ↗
3. Ernst L, Zhang G, Jansen K, Bressers H (2003) Time-and temperature-dependent thermo-mechanical modeling of a packaging molding compound and its effect on packaging process stresses. J Electron Packag 125:539–54810.1115/1.1604156 ↗
4. O’Brien DJ, Sottos N, White SR (2007) Cure-dependent viscoelastic Poisson’s ratio of epoxy. Exp Mech 47:237–24910.1007/s11340-006-9013-9 ↗
5. Van Driel W, Janssen J, Zhang G, Yang D, Ernst L (2003) Packaging induced die stresses—effect of chip anisotropy and time-dependent behavior of a molding compound. J Electron Packag 125:520–52610.1115/1.1604153 ↗
6. Tschoegl NW, Knauss WG, Emri I (2002) Poisson’s ratio in linear viscoelasticity–a critical review. Mech Time-Dependent Mater 6:3–5110.1023/A:1014411503170 ↗
7. Sadeghinia M, Jansen K, Ernst L (2012) Characterization and modeling the thermo-mechanical cure-dependent properties of epoxy molding compound. Int J Adhes Adhes 32:82–8810.1016/j.ijadhadh.2011.10.007 ↗
8. Emri I, Prodan T (2006) A measuring system for bulk and shear characterization of polymers. Exp Mech 46:429–43910.1007/s11340-006-8528-4 ↗
9. Wang Y, Woodworth L, Han B (2011) Simultaneous measurement of effective chemical shrinkage and modulus evolutions during polymerization. Exp Mech 51:1155–116910.1007/s11340-010-9410-y ↗
10. Sun Y, Wang Y, Jang C, Han B, Choi K (2013) Generalized hybrid modeling to determine chemical shrinkage and modulus evolutions at arbitrary temperatures. Exp Mech 53:1783–179010.1007/s11340-013-9752-3 ↗
11. Sun Y, Wang Y, Kim Y, Han B (2014) Dual-configuration fiber Bragg grating sensor technique to measure coefficients of thermal expansion and hygroscopic swelling. Exp Mech 54:593–60310.1007/s11340-013-9804-8 ↗
12. Sun Y, Han B, Parsa E, Dasgupta A (2014) Measurement of effective chemical shrinkage and equilibrium modulus of silicone elastomer used in potted electronic system. J Mater Sci 49:8301–831010.1007/s10853-014-8538-z ↗
13. Karalekas D, Cugnoni J, Botsis J (2008) Monitoring of process induced strains in a single fibre composite using FBG sensor: a methodological study. Compos A: Appl Sci Manuf 39:1118–112710.1016/j.compositesa.2008.04.010 ↗
14. Tanaka N, Okabe Y, Takeda N (2003) Temperature-compensated strain measurement using fiber Bragg grating sensors embedded in composite laminates. Smart Mater Struct 12:94010.1088/0964-1726/12/6/011 ↗
15. Tao X, Tang L, Du W-c, Choy C-l (2000) Internal strain measurement by fiber Bragg grating sensors in textile composites. Compos Sci Technol 60:657–66910.1016/S0266-3538(99)00163-3 ↗
16. Prigogine I (1967) Introduction to thermodynamics of irreversible processes. New York: Interscience, 3rd ed., vol. 1, 1967
17. Procter P and Solc J (1991) Improved thermal conductivity in microelectronic encapsulants. In: Electronic Components and Technology Conference, Proceedings., 41st, pp. 835–84210.1109/ECTC.1991.163976 ↗
18. Brinson HF and Brinson LC (2008) Polymer engineering science and viscoelasticity: Springer10.1007/978-0-387-73861-1 ↗
19. Blankleider B, Woloshyn R (1984) Quasi-elastic scattering of polarized electrons on polarized He 3. Phys Rev C 29:53810.1103/PhysRevC.29.538 ↗
20. Brenner R, Masson R, Castelnau O, Zaoui A (2002) A “quasi-elastic” affine formulation for the homogenised behaviour of nonlinear viscoelastic polycrystals and composites. Eur J Mech-A/Solids 21:943–96010.1016/S0997-7538(02)01247-0 ↗