journal article·2008-12

The Validity Range of Low Fidelity Structural Membrane Models

B. Stanford, P. Ifju

Experimental Mechanics· Volume 48· Issue 6
Publisher page

Abstract

Three classes of structural models can be considered for the characterization of thin extensible pressurized membranes. A low-fidelity, linear model assumes that all of the membrane’s resistance to a transverse pressure is provided from geometric stress-stiffening, and that movement along the membrane is purely out-of-plane. A medium-fidelity model can include geometric nonlinearity (finite strains, non-conservative pressure loads); while the highest level of membrane modeling assumes material nonlinearity: specifically, hyperelasticity. Common modeling applications such as performance prediction, failure prevention, and structural optimization all require repeated function evaluations. As computational cost is proportional to model fidelity, what is the validity range of the two lower fidelity models discussed above? The presence of a large pre-tension within the membrane is known to lessen the role of nonlinear elastic effects: the range of linear transverse deformation increases with pre-tension. Conversely, very low pre-tensions require the use of a nonlinear model, as the linear model becomes unbounded. This work studies the Hencky–Campbell problem for model validation purposes: hydrostatic inflation of a thin flat circular membrane, clamped along its boundary, with an arbitrary initial tension. A full-field, non-contact visual image correlation system is used to estimate the material properties of the rubber membrane, measure the state of pre-tension in the circular sheet, and document the displacement and strain fields as a function of applied pressure. The resulting data set is then compared directly with numerical simulations, in order to estimate the location of the surface of data points wherein a particular low fidelity model (either linear or geometrically nonlinear) loses its predictive capability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Health Monitoring Techniques · Infrastructure Maintenance and Monitoring · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Gridchin V, Grichenko V, Lubimsky V (2005) Square-membrane deflection and stress: identifying the validity range of a calculation procedure. Russ Microelectron 34(3):173–180.10.1007/s11180-005-0026-3 ↗
2. Marker D, Jenkins C (1997) Surface precision of optical membranes with curvature. Opt Express 1(11):324–331.10.1364/OE.1.000324 ↗
3. Chow P (1992) Construction of pressurized, self-supporting membrane structure on the Moon. J Aerosp Eng 5(3):274–281.10.1061/(ASCE)0893-1321(1992)5:3(274) ↗
4. Pauletti R, Guirardi D, Deifeld T (2005) Argyris’ natural finite element revisited. International Conference on Textile Composites and Inflatable Structures, Stuttgart, Germany, October 2–5.
5. Galvao R, Israeli E, Song A, Tian X, Bishop K, Swartz S, Breuer K (2006) The aerodynamics of compliant membrane wings modeled on mammalian flight mechanics. AIAA Fluid Dynamics Conference and Exhibit, San Francisco, CA, June 5–8.10.2514/6.2006-2866 ↗
6. Hencky H (1915) On the stress state in circular plates with vanishing bending stiffness. Zietschrift fur Mathematik und Physik 63(3):311–317.
7. Campbell J (1956) On the theory of initially tensioned circular membranes subjected to uniform pressure. Q J Mech Appl Math 9(1):84–93.10.1093/qjmam/9.1.84 ↗
8. Jenkins C, Leonard J (1991) Nonlinear dynamic response of membranes: state of the art. Appl Mech Rev 44(7):319–328.10.1115/1.3119506 ↗
9. Jenkins C (1996) Nonlinear dynamic response of membranes: state of the art—update. Appl Mech Rev 49(10):S41–S48.10.1115/1.3101975 ↗
10. Selvadurai A (2006) Deflections of a rubber membrane. J Mech Phys Solids 54(6):1093–1119.10.1016/j.jmps.2006.01.001 ↗
11. Komaragiri U, Begley M, Simmonds J (2005) The mechanical response of freestanding circular elastic films under point and pressure loads. J Appl Mech 72(2):203–212.10.1115/1.1827246 ↗
12. Sheplak M, Dugundji J (1998) Large deflections of clamped circular plates under tension and transitions to membrane behavior. J Appl Mech 65(1):107–115.10.1115/1.2789012 ↗
13. Cook R, Malkus D, Plesha W, Witt R (2002) Concepts and applications of finite element analysis. Wiley, New York, NY.
14. Kennedy G (1952) A photogrammetric membrane analysis of an angle section in torsion. Masters Thesis, Department of Civil Engineering, University of Maryland, College Park, MD.
15. Fulop W (1954) The rubber membrane and the solution of Laplace’s equation. Br J Appl Phys 6(1):21–23.10.1088/0508-3443/6/1/309 ↗
16. Sugimoto T (1991) Analysis of circular elastic membrane wings. Transactions of the Japanese Aerodynamics and Space Sciences 34(105):154–166.
17. Fichter W (1997) Some solutions for the large deflections of uniformly loaded circular membranes. NASA Technical Paper, TP 3658.
18. Storakers B (1983) Variation principles and bounds for the approximate analysis of plane membranes under lateral pressure. J Appl Mech 50(4):743–749.10.1115/1.3167140 ↗
19. Kao R, Perrone N (1971) Large deflections of axisymmetric circular membranes. Int J Solids Struct 7(12):1601–1612.10.1016/0020-7683(71)90001-1 ↗
20. Dickey R (1967) The plane circular elastic surface under normal pressure. Arch Ration Mech Anal 26(3):219–236.10.1007/BF00281971 ↗
21. Bouzidi R, Rayaut Y, Wielgosz C (2003) Finite elements for 2D problems of pressurized membranes. Comput Struct 81(26):2479–2490.10.1016/S0045-7949(03)00308-0 ↗
22. Taylor R, Onate E, Ubach P (2005) Finite element analysis of membrane structures. In: Onate E, Kröplin B (eds) Textile composites and inflatable structures. Springer, The Netherlands.
23. Argyris J, Dunne P, Angelopoulos T, Bichat B (1974) Large natural strains and some special difficulties due to non-linearity incompressibility in finite elements. Comput Methods Appl Mech Eng 4(3):219–278.10.1016/0045-7825(74)90035-8 ↗
24. Pujara R, Lardner T (1978) Deformations of elastic membranes—effect of different constituitive relations. Zeitschrift fur Agnewandte Mathematik und Physik 29(2):315–327.10.1007/BF01601526 ↗
25. Wilkes J (1998) Application of power series solutions of membrane equilibrium equation to the optical evaluation of membrane mirrors with curvature. U.S. Air Force Research Laboratory, AFRL-DE-PS-TR-1998-1069, Kirtland AFB.10.21236/ADA359549 ↗
26. Hermida A (1994) Deflection and stress in preloaded rectangular membrane. NASA Technical Brief GSC 13561.
27. Small M, Nix W (1992) Analysis of the accuracy of the bulge test in determining the mechanical properties of thin films. J Mater Res 7(6):1553–1563.10.1557/JMR.1992.1553 ↗
28. Kalkman A, Verbruggen A, Janssen G, Groen F (1999) A novel bulge-testing setup for rectangular free-standing thin films. Rev Sci Instrum 70(10):4026–4031.10.1063/1.1150029 ↗
29. Stevens H (1944) Behavior of circular membranes stretched above the elastic limit by air pressure. Soc Exp Stress Anal, Boston, MA, May 18–20.
30. Treloar L (1944) Strains in an Inflated sheet, and the mechanism of bursting. Inst Rubber Ind 19:201–212.
31. Bray J, Merry S (1999) A comparison of the response of geosynthetics in the multi-axial and uniaxial test devices. Geosynth Int. 6(1):19–40.10.1680/gein.6.0141 ↗
32. Hsu F, Liu A, Downs J, Rigamonti D, Humphrey J (1995) A triplane video-based experimental system for studying axisymmetrically inflated biomembranes. IEEE Trans Biomed Eng 42(5):442–450.10.1109/10.376148 ↗
33. Reuge N, Schmidt F, Le Maoult Y, Rachik M, Abbé F (2001) Elastomer biaxial characterization using bubble inflation technique. I: experimental investigations. Polym Eng Sci 41(3):522–531.10.1002/pen.10749 ↗
34. Li Y, Nemes J, Derdouri A (2001) Membrane inflation of polymeric materials: experiments and finite elements. Polym Eng Sci 41(8):1399–1412.10.1002/pen.10840 ↗
35. Mitchell J, Zorman C, Kicher T, Roy S, Mehregany M (2003) Examination of bulge test for determining residual stress, young’s modulus, and Poisson’s ratio of 3C–SiC thin films. J Aerosp Eng 16(2):46–54.10.1061/(ASCE)0893-1321(2003)16:2(46) ↗
36. Genovese K, Lamberti L, Pappalettere C (2006) Mechanical characterization of hyperelastic materials with fringe projection and optimization techniques. Opt Lasers Eng 4(5):423–442.10.1016/j.optlaseng.2005.06.003 ↗
37. Sasso M, Amodio D (2006) Development of a Biaxial Stretching Machine for Rubbers by Optical Methods. Society for Experimental Mechanics Annual Conference, St. Louis, MO, June 4–7.
38. Mase G, Mase G (1999) Continuum mechanics for engineers. CRC, Boca Raton, FL.10.1201/9781439832578 ↗
39. Wu B, Du X, Tan H (1996) A three-dimensional FE nonlinear analysis of membranes. Comput Struct 59(4):601–605.10.1016/0045-7949(95)00283-9 ↗
40. Hashimoto O, Shimizu Y (1986) Reflecting characteristics of anisotropic rubber sheets and measurement of complex permittivity tensor. IEEE Trans Microwave Theor Tech 34(11):1202–1207.10.1109/TMTT.1986.1133517 ↗
41. Sutton M, Cheng M, Peters W, Chao Y, McNeill S (1986) Application of optimized digital correlation method to planar analysis. Image Vis Comput 4(3):143–151.10.1016/0262-8856(86)90057-0 ↗
42. Schreier H, Braasch J, Sutton M (2000) Systematic errors in digital image correlation caused by gray-value interpolation. Opt Eng 39(11):2915–2921.10.1117/1.1314593 ↗
43. Mooney M (1940) A theory of large elastic deformation. J Appl Phys 11(9):582–592.10.1063/1.1712836 ↗
44. Gibson L, Ashby M (1997) Cellular solids: structure and properties. Cambridge University Press, New York, NY.10.1017/CBO9781139878326 ↗