journal article·2014-06

Feature-Specific CT Measurements for Log Scanning: Theory and Application

Y. An, G. S. Schajer

Experimental Mechanics· Volume 54· Issue 5
Publisher page

Abstract

Computed Tomography (CT) is extensively used as a medical diagnostic tool, and increasingly adopted for scientific and industrial research. In the wood industry, there is a growing interest in using the CT technique to assess the quality of logs entering a sawmill to enable the material to be appropriately processed into maximum value products. Internal features of interest include knots, heartwood/sapwood boundary, rot and splits. Most commercially available CT scanning systems are modeled on medical designs and provide high spatial and density resolution. They are very complex and delicate devices with correspondingly high cost. However, log scanning has its own distinctive characteristics: specific overall and feature geometries and relatively coarse scanning resolution requirement. To fit these characteristics, the novel geometry-based coarse-resolution CT scanning approach described here has been developed and implemented. The models, algorithms, scanner design and result validation are presented in detail. The resulting CT reconstructions for an example log using the proposed geometry-based coarse-resolution approach compare well with CT reconstructions for same log using the same data with conventional filtered back projection inversion. The good comparison gives confidence in the usefulness and applicability of the proposed CT method for industrial use in sawmills for log quality assessment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced X-ray and CT Imaging · Medical Imaging Techniques and Applications · Radiation Dose and Imaging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Oja J, Grundberg S, Fredriksson J, Berg P (2004) Automatic grading of sawlogs: a comparison between Xray scanning, optical three-dimensional scanning and combinations of both methods. Scand J For Res 19:89–9510.1080/02827580310019563 ↗
2. Pietkäininen M (1996) Detection of knots in logs using X-ray imaging. Dissertation, technical research centre of Finland. VTT, Espoo, 266
3. Usenius A (2003) Optimization of sawing operation based on internal characterization of the logs. Proc. ScanTech 2003, Wood Machining Institute, Seattle, WA, USA. pp. 11–18
4. Rinnhofer A, Petutschnig A, Andreu JP (2003) Internal log scanning for optimizing breakdown. Comp Electron Agric 41:7–2110.1016/S0168-1699(03)00039-5 ↗
5. Chiorescu S, Grönlund A (2000) Validation of a CT-based simulator against a sawmill yield. For Prod J 50:69–76
6. Oja J, Wallbacks L, Grundberg S, Hagerdal E, Grönlund A (2003) Automatic grading of scots pine (Pinus sylvestris L.) Sawlogs using an industrial x-ray log scanner. Comput Electron Agric 41:63–7510.1016/S0168-1699(03)00042-5 ↗
7. Seger MM, Danielson PE (2003) Scanning of logs with linear cone-beam tomography. Comput Electron Agric 41:45–6210.1016/S0168-1699(03)00041-3 ↗
8. Krahenbuhl A, Kerautret B, Longuetaud F (2011) Knots detection in X-ray CT images of wood. Scand J For Res 12:80–90
9. Som S, Wells P, Davis J (1992) Automated feature extraction of wood from tomographic images. Proceeding of International Conference on Automation, Robotics and Computer Vision, Singapore, 15–18 September, pp. CV-14.4.1-CV-14.4.5
10. Longuetaud F, Mothe F, Kerautret B (2012) Automatic knots detection and measurements from X-ray CT images of wood: a review and validation of an improved algorithm on softwood samples. Comput Electron Agric 85:77–8910.1016/j.compag.2012.03.013 ↗
11. Schmoldt DL, He J, Abbott AL (2000) Automated labelling of log features in CT imagery of multiple hardwood species. Wood Fiber Sci 32(3):287–300
12. Wang G, Yu H (2008) An outlook on X-ray CT research and development. Med Phys 35(3):1051–106410.1118/1.2836950 ↗
13. Lindgren LO (1991) Medical CAT-scanning, X-ray absorption coefficients, CT-number and their relation to wood density. Wood Sci Technol 25:341–349
14. An Y (2013) Coarse-resolution CT scanning for sawmill logs sorting and grading. UBC Dissertation
15. An Y, Schajer GS (2013) Coarse-resolution cone-beam scanning of logs using Eulerian CT reconstruction. Part I: Discretization and algorithm. In Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems, 8: 9–19
16. Herman GT (1979) Image reconstruction from projections. Image Reconstruction from Projections: Implementation and Applications, 110.1007/3-540-09417-2_1 ↗
17. Herman GT, Lent A, Rowland SW (1973) ART: mathematics and applications: a report on the mathematical foundations and on the applicability to real data of the algebraic reconstruction techniques. J Theor Biol 42(1):1–3210.1016/0022-5193(73)90145-8 ↗
18. Kak AC, Slaney M (1987) Principles of computerized tomography. IEEE Press
19. ASTM (1993) Standard guide for computed tomography (CT) imaging. American society for testing and materials, West Conshohocken, PA. ASTM Standard E-1441–11
20. Galassi M, et al. (2009) GNU Scientific library reference manual, 3rd ed., http://www.gnu.org/software/gsl/ . Accessed June 25, 2011
21. An Y, Schajer GS (2013) Coarse-resolution cone-beam scanning of logs using Eulerian CT reconstruction. Part II: Hardware design and demonstration. In Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems 8: 21–29
22. Kyokko DRZ X-ray Screen. http://www.mcio.com/Products/drz-screens.aspx . Accessed Jan 20, 2011
23. Andor iXon 897 EMCCD Camera. http://www.andor.com/scientific-cameras/ixon-emccd-camera-series/ixon-ultra-897 . Accessed Oct 15, 2010
24. Zribi M, Chiasson J (1991) Position control of a PM stepper motor by exact linearization. IEEE Trans Autom Control 36(5):620–62510.1109/9.76368 ↗
25. Plomion C, Leprovost G, Stokes A (2001) Wood formation in trees. Plant Physiol 127(4):1513–152310.1104/pp.010816 ↗