Bearing Fault Severity Analysis on A Multi-stage Gearbox Subjected to Fluctuating Speeds
Source abstract
Abstract
Early detection of bearing defects may prevent the occurrence of catastrophic failures of the whole associated system. Condition monitoring strategies such as vibration and acoustic signal analyses are employed for incipient fault diagnosis of bearings. The current investigation attempts to compare the fault diagnostic capabilities in terms of their effectiveness in early detection of local bearing defects. Experiments are performed on a three-stage gearbox under constant and fluctuating operating conditions of speed. Wavelet coefficients are achieved from the acquired raw signals by discrete wavelet transform and various statistical features are obtained. Most contributing features among them are chosen by decision tree. Further, the extracted features are classified based on their fault severity levels using support vector machine algorithm. The experimental investigation revealed that vibration signal analysis outperformed the acoustic signal analysis under the experimental operating conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Machine Fault Diagnosis Techniques · Gear and Bearing Dynamics Analysis · Fault Detection and Control Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Sharma A, Amarnath M, Kankar PK (2017) Novel ensemble techniques for classification of rolling element bearing faults. J Braz Soc Mech Sci Eng 39(3):709–72410.1007/s40430-016-0540-8 ↗
2. Tandon N, Choudhury A (1999) A review of vibration and acoustic measurement methods for the detection of defects in rolling element bearings. Tribology international 32(8):469– 48010.1016/S0301-679X(99)00077-8 ↗
3. Hizarci B, Ümütlü RC, Ozturk H, Kıral Z (2019) Vibration Region Analysis for Condition Monitoring of Gearboxes Using Image Processing and Neural Networks. Exp Techniques 43(6):739–75510.1007/s40799-019-00329-9 ↗
4. Karacay T, Akturk N (2009) Experimental diagnostics of ball bearings using statistical and spectral methods. Tribology International 42(6):836–84310.1016/j.triboint.2008.11.003 ↗
5. Sugumaran V, Sabareesh GR, Ramachandran KI (2008) Fault diagnostics of roller bearing using kernel based neighborhood score multi-class support vector machine. Expert Systems with Applications 34(4):3090–309810.1016/j.eswa.2007.06.029 ↗
6. Amarnath M, Krishna IP (2014) Local fault detection in helical gears via vibration and acoustic signals using EMD based statistical parameter analysis. Measurement 58:154–16410.1016/j.measurement.2014.08.015 ↗
7. Amarnath M, Sugumaran V, Kumar H (2013) Exploiting sound signals for fault diagnosis of bearings using decision tree. Measurement 46(3):1250–125610.1016/j.measurement.2012.11.011 ↗
8. Gunerkar RS, Jalan AK (2019) Classification of Ball Bearing Faults Using Vibro-Acoustic Sensor Data Fusion. Exp Techniques 43(5):635–64310.1007/s40799-019-00324-0 ↗
9. Vamsi I, Sabareesh GR, Penumakala PK (2019) Comparison of condition monitoring techniques in assessing fault severity for a wind turbine gearbox under non-stationary loading. Mech Syst Signal Process 124:1–2010.1016/j.ymssp.2019.01.038 ↗
10. Baydar N, Ball A (2003) Detection of gear failures via vibration and acoustic signals using wavelet transform. Mechanical Systems and Signal Processing 17(4):787–80410.1006/mssp.2001.1435 ↗
11. Radhika S, Sabareesh GR, Jagadanand G, Sugumaran V (2010) Precise wavelet for current signature in 3 IM. Expert Systems with applications 37(1):450–45510.1016/j.eswa.2009.05.046 ↗
12. Kumar R, Singh M (2013) Outer race defect width measurement in taper roller bearing using discrete wavelet transform of vibration signal. Measurement 46(1):537–54510.1016/j.measurement.2012.08.012 ↗
13. Biswal S, George JD, Sabareesh GR (2016) Fault size estimation using vibration signatures in a wind turbine test-rig. Procedia Engineering 144:305–31110.1016/j.proeng.2016.05.137 ↗
14. Heyns PS, Vinson R, Heyns T (2016) Rotating machine diagnosis using smart feature selection under non-stationary operating conditions. Insight-Non-Destructive Testing and Condition Monitoring 58(8):417–42210.1784/insi.2016.58.8.417 ↗
15. Ahamed N, Pandya Y, Parey A (2014) Spur gear tooth root crack detection using time synchronous averaging under fluctuating speed. Measurement 52:1–1110.1016/j.measurement.2014.02.029 ↗
16. Jena DP, Panigrahi SN (2015) Automatic gear and bearing fault localization using vibration and acoustic signals. Applied Acoustics 98:20–3310.1016/j.apacoust.2015.04.016 ↗
17. Sujatha C. (2010) Vibration and acoustics. Tata McGraw-Hill Education
18. Sugumaran V, Ramachandran KI (2011) Effect of number of features on classification of roller bearing faults using SVM and PSVM. Expert Systems with Applications 38(4):4088–409610.1016/j.eswa.2010.09.072 ↗
19. Inturi V, Sabareesh GR, Supradeepan K, Penumakala PK (2019) Integrated condition monitoring scheme for bearing fault diagnosis of a wind turbine gearbox. J Vib Control 25(12):1852–186510.1177/1077546319841495 ↗
20. Davis BT, Caicedo JM, Hirth VA, Easterling BM (2019) Acceleration Signal Categorization Using Support Vector Machines. Experimental Techniques 43(3):359–36810.1007/s40799-019-00318-y ↗