Fracture and load-carrying capacity of 3D-printed cracked components
Source abstract
Abstract
Abstract Regrading to the numerous potentials of additive manufacturing in producing components, three-dimensional (3D)-printed parts are becoming more prevalent in various industries and research associations. In this paper, fracture of U-notched 3D-printed parts under mode I and mixed mode I/II are experimentally investigated. To this aim, specimens are 3D-printed by polycarbonate (PC) and Nylon filaments using fused deposition modeling (FDM) 3D printing. In the fabrication, U-notched rectangular specimens are produced. A series of experimental practices are performed to determine load-carrying capacity of U-notched 3D-printed parts. In the current study, a combination of J-integral failure criterion and the equivalent material concept (EMC) was implemented to investigate failure of the specimens. Since the tested material has shown elastic–plastic behavior, EMC was utilized to avoid computationally inefficient non-linear failure analyses. By the obtained results, it is concluded that combination of EMC and J-integral criterion is able to predict the experimental results for the different 3D-printed materials. Parallel to the experimental investigations, numerical simulations are conducted and a very good agreement between simulation finding and reported experimental results is shown.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Additive Manufacturing and 3D Printing Technologies · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Biomimetic additive manufactured polymer composites for improved impact resistance10.1016/j.eml.2016.09.006 ↗
2. Evolution of 3D printed soft actuators10.1016/j.sna.2016.09.028 ↗
3. Additive manufacturing of polymer-derived titania for one-step solar waterpurification10.1016/j.mtcomm.2018.02.010 ↗
4. 3D printed electrically-driven soft actuators10.1016/j.eml.2018.02.002 ↗
5. 3D-printed senosrs - current progress and future challenges10.1016/j.sna.2020.111916 ↗
6. Steady-state, elastic-plastic growth of slanted cracks in symmetrically loaded plates10.1016/j.ijimpeng.2017.03.015 ↗
7. Calibration procedures for a computational model of ductile fracture10.1016/j.engfracmech.2009.10.007 ↗
8. Fatigue strength of severely notched specimens made of Ti-6Al-4V under multiaxial loading10.1111/ffe.12272 ↗
9. The effect of loading rate on ductile fracture toughness andfracture surface roughness10.1016/j.jmps.2014.11.007 ↗
10. Fracture resistance analysis of 3d-printed polymers10.3390/polym12020302 ↗
11. Prediction of ductile fracture through small-size notched tensile specimens
12. Experimental and numerical study of mode I and mixed-mode fracture ductile U-notched functionally graded materials10.1016/j.ijmecsci.2018.06.008 ↗
13. Ductile fracture in notched bulk metallic glasses10.1016/j.actamat.2017.06.048 ↗
14. Deformation and fracture of 3D printed disordered lattice materials: experiments and modeling10.1016/j.matdes.2018.11.047 ↗
15. Interfacial performance and fracture patterns of 3D printed continuous carbon fiber with sizing reinforced PA6 composites10.1016/j.compositesa.2018.09.001 ↗
16. Ductile fracture of notched aluminum alloy specimens under elevated temperature part 2 – numerical modelling and fracture criterion10.1016/j.tafmec.2019.01.023 ↗
17. Influence of defects on the performance of adhesively bonded sandwich joints10.4028/www.scientific.net/KEM.789.45 ↗
18. Tensile failure prediction of U-notched plates under moderate-scale and large-scale yielding regimes10.1016/j.tafmec.2017.07.009 ↗
19. 2003
20. Estimation of tensile load-bearing capacity of ductile metallic materials weakened by a V-notch: the equivalent material concept10.1016/j.msea.2012.01.007 ↗
21. Two parameter fracture criterion (Kρ,c−Tef,c) based on notch fracture mechanics10.1007/s10704-010-9542-1 ↗
22. Notched plates in mixed mode loading (I+II): a review based on the local strain energy density and the cohesive zone model10.5267/j.esm.2016.11.002 ↗
23. Variations on the theme of fracture criteria10.1016/0013-7944(89)90024-6 ↗
24. Brittle fracture criterion for structures with sharp notches10.1016/0013-7944(94)90158-9 ↗
25. Maximum circumferential stress criterion applied to orthropic materials10.1111/j.1460-2695.2005.00922.x ↗
26. Influence of strain rate on fracture behavior of sandwich composite T-joints10.1016/j.euromechsol.2019.103821 ↗
27. Application of fracture mechanics at and beyond general yielding
28. A micro and macro approach to the energy dissipation rate model of stable ductile crack growth10.1111/j.1460-2695.1994.tb00837.x ↗
29. Mixed-mode J-integral formulation and implementation using graded elements for fracture analysis of nonhomogeneous orthotropic materials10.1016/S0167-6636(02)00159-X ↗
30. Evaluation of j-integral for surface cracked plates under biaxial loading using extended reference stress method10.1016/j.ijpvp.2009.11.003 ↗
31. J-integral-based approach to fatigue assessment of laser stake-welded T-joints10.1016/j.ijfatigue.2012.09.019 ↗
32. Determination of the mode I critical J-integral of copy paper10.1016/j.engfracmech.2016.10.017 ↗
33. On the path dependence of the J-integral in notch problems10.1016/j.ijsolstr.2003.10.007 ↗
34. Calculation of the energy J-integral for bodies with notches and cracks10.1023/B:FRAC.0000022241.23377.91 ↗
35. Relationships between J-integral and the strain energy evaluated in a finite volume surrounding the tip of sharp and blunt V-notches10.1016/j.ijsolstr.2006.11.041 ↗
36. The role of stress softening in crack propagation of filler reinforced elastomers as evaluated by the J-integral10.1016/j.engfracmech.2019.04.025 ↗
37. A path independent integral and the approximate analysis of strain concentration by notches and cracks10.1115/1.3601206 ↗
38. Brittle fracture of U-notched graphite plates under mixed mode loading10.1016/j.matdes.2012.05.022 ↗
39. J-integral expression for mixed mode I/II ductile failure prediction of U-notched Al 6061-T6 plates under large-scale yielding regime10.1016/j.engfracmech.2018.04.007 ↗