journal article·2021-11Open access

Dynamic mechanical behaviors of nacre-inspired graphene-polymer nanocomposites depending on internal nanostructures

Cho-Chun Chiang, Jane Breslin, Sydney Weeks, Zhaoxu Meng

Abstract

Nacre, a natural nanocomposite with a brick-and-mortar structure existing in the inner layer of mollusk shells, has been shown to optimize strength and toughness along the laminae (in-plane) direction. However, such natural materials more often experience impact load in the direction perpendicular to the layers (i.e., out-of-plane direction) from predators. The dynamic responses and deformation mechanisms of layered structures under impact load in the out-of-plane direction have been much less analyzed. This study investigates the dynamic mechanical behaviors of nacre-inspired layered nanocomposite films using a model system that comprises alternating multi-layer graphene (MLG) and polymethyl methacrylate (PMMA) phases. With a validated coarse-grained molecular dynamics simulation approach, we systematically study the mechanical properties and impact resistance of the MLG-PMMA nanocomposite films with different internal nanostructures, which are characterized by the layer thickness and number of repetitions while keeping the total volume constant. We find that as the layer thickness decreases, the effective modulus of the polymer phase confined by the adjacent MLG phases increases. Using ballistic impact simulations to explore the dynamic responses of nanocomposite films in the out-of-plane direction, we find that the impact resistance and dynamic failure mechanisms of the films depend on the internal nanostructures. Specifically, when each layer is relatively thick, the nanocomposite is more prone to spalling-like failure induced by compressive stress waves from the projectile impact. Whereas, when there are more repetitions, and each layer becomes relatively thin, a high-velocity projectile sequentially penetrates the nanocomposite film. In the low projectile velocity regime, the film develops crazing-like deformation zones in PMMA phases. We also show that the position of the soft PMMA phase relative to the stiff graphene sheets plays a significant role in the ballistic impact performance of the investigated films. Our study provides insights into the effect of nanostructures on the dynamic mechanical behaviors of layered nanocomposites, which can lead to effective design strategies for impact-resistant films.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Calcium Carbonate Crystallization and Inhibition · Energetic Materials and Combustion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (75)

Show source-provided references
1. Parametric study of a SPH high velocity impact analysis–a birdstrike windshield application10.1016/j.compstruct.2012.09.037 ↗
2. Polymer based aerospace structures under high velocity impact applications; experimental, constitutive and finite element analysis10.1007/s12206-015-0922-3 ↗
3. Debris/micrometeoroid impacts and synergistic effects on spacecraft materials10.1557/mrs2010.615 ↗
4. Mechanical stability of flexible graphene-based displays10.1021/acsami.6b05227 ↗
5. Development of electronic textiles to support networks, communications, and medical applications in future US military protective clothing systems10.1109/TITB.2005.854508 ↗
6. The response of glass window systems to blast loadings: An overview10.1177/2041419615626061 ↗
7. Numerical analysis of impact failure of automotive laminated glass: a review10.1016/j.compositesb.2017.04.007 ↗
8. Blast resistance of auxetic and honeycomb sandwich panels: Comparisons and parametric designs10.1016/j.compstruct.2017.03.018 ↗
9. Dynamic mechanical analysis of novel polyurethane coating for military applications10.1016/S0040-6031(00)00385-3 ↗
10. The high velocity impact response of composite and FML-reinforced sandwich structures10.1016/S0266-3538(03)00197-0 ↗
11. High velocity impact response of Kevlar-29/epoxy and 6061-T6 aluminum laminated panels10.1016/j.matdes.2012.06.034 ↗
12. Impact resistance of composite magnetic metamaterials10.1038/s41598-019-40610-w ↗
13. Ballistic impact into fabric and compliant composite laminates10.1016/S0263-8223(03)00029-1 ↗
14. High strain rate deformation of layered nanocomposites10.1038/ncomms2166 ↗
15. Deformation mechanism transitions in nanoscale fcc metals10.1080/09500830310001614540 ↗
16. Single-dislocation-based strengthening mechanisms in nanoscale metallic multilayers10.1080/01418610208239626 ↗
17. Relative importance of grain boundaries and size effects in thermal conductivity of nanocrystalline materials10.1038/srep07037 ↗
18. Structure and thermodynamic properties of nanocrystalline metals10.1103/PhysRevB.45.635 ↗
19. Effect of grain size on mechanical properties of nanocrystalline materials10.1016/0956-7151(94)00253-E ↗
20. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
21. Dynamic mechanical behavior of multilayer graphene via supersonic projectile penetration10.1126/science.1258544 ↗
22. Superior energy dissipation by ultrathin semicrystalline polymer films under supersonic microprojectile impacts10.1021/acs.nanolett.0c00066 ↗
23. Effects of confinement on microstructure and charge transport in high performance semicrystalline polymer semiconductors10.1002/adfm.201202408 ↗
24. Effects of confinement on material behaviour at the nanometre size scale
25. Effect of confinement on stiffness and fracture of thin amorphous polymer films10.1021/mz200090a ↗
26. Stiffness enhancement in nacre-inspired nanocomposites due to nanoconfinement10.1038/srep16452 ↗
27. Elastic moduli of ultrathin amorphous polymer films10.1021/ma060790i ↗
28. Effect of thickness on the thermo-mechanical response of free-standing thermoset nanofilms from molecular dynamics10.1021/ma201927n ↗
29. Evidence for size-dependent mechanical properties from simulations of nanoscopic polymeric structures10.1063/1.1476315 ↗
30. Interfacial stiffening of polymer thin films under nanoconfinement10.1016/j.eml.2015.05.001 ↗
31. Bioinspired structural materials10.1038/nmat4089 ↗
32. Nanoscale structural and mechanical characterization of a natural nanocomposite material: the shell of red abalone10.1021/nl049962k ↗
33. Structural and mechanical properties of the organic matrix layers of nacre10.1016/S0142-9612(03)00215-1 ↗
34. AFM Identification of beetle exocuticle: Bouligand structure and nanofiber anisotropic elastic properties10.1002/adfm.201603993 ↗
35. Revealing the design principles of high-performance biological composites using ab initio and multiscale simulations: the example of lobster cuticle10.1002/adma.200902019 ↗
36. Structure and mechanical properties of crab exoskeletons10.1016/j.actbio.2007.12.010 ↗
37. Mechanical adaptability of the Bouligand-type structure in natural dermal armour10.1038/ncomms3634 ↗
38. Protective role of arapaima gigas fish scales: structure and mechanical behavior10.1016/j.actbio.2014.04.009 ↗
39. The stomatopod dactyl club: a formidable damage-tolerant biological hammer10.1126/science.1218764 ↗
40. Impact resistance of nanocellulose films with bioinspired Bouligand microstructures10.1039/C8NA00232K ↗
41. Hierarchical structure and mechanical properties of nacre: a review10.1039/c2ra20218b ↗
42. Layered nanocomposites inspired by the structure and mechanical properties of nacre10.1039/C1CS15106A ↗
43. Nacre-inspired composites with different macroscopic dimensions: strategies for improved mechanical performance and applications10.1038/s41427-018-0009-6 ↗
44. Nacre-inspired design of graphene oxide–polydopamine nanocomposites for enhanced mechanical properties and multi-functionalities10.1088/2399-1984/aa6aed ↗
45. Nacre-inspired integrated strong and tough reduced graphene oxide–poly (acrylic acid) nanocomposites10.1039/C6NR00562D ↗
46. Designing multi-layer graphene-based assemblies for enhanced toughness in nacre-inspired nanocomposites10.1039/C6ME00022C ↗
47. Molecular dynamics study of the reinforcement effect of graphene in multilayered polymer nanocomposites10.1016/j.matdes.2017.03.052 ↗
48. Understanding the interfacial mechanical response of nanoscale polymer thin films via nanoindentation10.1021/acs.macromol.6b00121 ↗
49. Energy absorption mechanisms of nanoscopic multilayer structures under ballistic impact loading10.1016/j.commatsci.2021.110504 ↗
50. Extreme mechanical behavior of nacre-mimetic graphene-oxide and silk nanocomposites10.1021/acs.nanolett.7b04421 ↗
51. Three-dimensional modelling of auxetic sandwich panels for localised impact resistance10.1177/1099636215618539 ↗
52. Impact response of Kevlar composites with nanoclay enhanced epoxy matrix10.1016/j.compositesb.2012.10.028 ↗
53. Impact resistance and damage characteristics of composite laminates10.1016/S0263-8223(03)00114-4 ↗
54. Superior dynamic penetration resistance of nanoscale multilayer polymer/metal films10.1115/1.4048319 ↗
55. Molecular dynamics study of the mechanical behaviour of ultrathin polymer–metal multilayers under extreme dynamic conditions10.1016/j.commatsci.2020.109951 ↗
56. Molecular dynamics study of the penetration resistance of multilayer polymer/ceramic nanocomposites under supersonic projectile impacts10.1016/j.eml.2021.101238 ↗
57. Comprehensive molecular dynamics studies of the ballistic resistance of multilayer graphene-polymer composite10.1016/j.commatsci.2019.109171 ↗
58. Systematic method for thermomechanically consistent coarse-graining: a universal model for methacrylate-based polymers10.1021/ct500080h ↗
59. A coarse-grained model for the mechanical behavior of multi-layer graphene10.1016/j.carbon.2014.10.040 ↗
60. Recoverable slippage mechanism in multilayer graphene leads to repeatable energy dissipation10.1021/acsnano.5b04939 ↗
61. Critical length scales and strain localization govern the mechanical performance of multi-layer graphene assemblies10.1039/C5NR08488A ↗
62. Mechanical and viscoelastic properties of wrinkled graphene reinforced polymer nanocomposites–effect of interlayer sliding within graphene sheets10.1016/j.carbon.2021.02.071 ↗
63. Reduced ballistic limit velocity of graphene membranes due to cone wave reflection10.1016/j.eml.2017.06.001 ↗
64. Spalling-like failure by cylindrical projectiles deteriorates the ballistic performance of multi-layer graphene plates10.1016/j.carbon.2017.10.068 ↗
65. Unraveling the effect of material properties and geometrical factors on ballistic penetration energy of nanoscale thin films10.1115/1.4041041 ↗
66. Fast parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
67. VMD: visual molecular dynamics10.1016/0263-7855(96)00018-5 ↗
68. Molecular dynamics simulation of a solid platinum nanowire under uniaxial tensile strain: Temperature and strain-rate effects10.1103/PhysRevB.72.085414 ↗
69. The damping and dynamic moduli of symmetric laminated composite beams—theoretical and experimental results10.1177/002199838401800202 ↗
70. Exponential temperature dependence of Young’s modulus for several oxides10.1103/PhysRev.122.1754 ↗
71. Shock response of metal–ceramic nanolayered composites10.1016/j.compositesb.2020.108272 ↗
72. Atomic-level deformation of Cu x Zr100-x metallic glasses under shock loading10.1063/1.5025650 ↗
73. Craze shape and fracture in poly (methyl methacrylate)10.1016/0032-3861(73)90152-3 ↗
74. Cracks and crazes: on calculating the macroscopic fracture energy of glassy polymers from molecular simulations10.1103/PhysRevLett.89.148304 ↗
75. Predicting the macroscopic fracture energy of epoxy resins from atomistic molecular simulations10.1021/acs.macromol.6b01508 ↗