journal article·2020-05

Temperature and rate dependent constitutive behaviors of low melt Field ’s metal

Quang-Kha Nguyen, Fanghang Deng, Pu Zhang

Publisher page

Abstract

Low melting point metals such as Field's metal and gallium are increasingly used as transition phases in stiffness-tuning soft materials and devices. Nevertheless, there is a knowledge gap on the fundamental constitutive behaviors of metals with melting points below 100 degree. This letter reports the stress-strain relationships of Field's metal at various temperatures and strain rates. This metal has the lowest melting point among metals whose constitutive behaviors have been studied systematically. Experimental results indicate that Field's metal exhibits a strain-softening behavior, in oppose to the strain-hardening behaviors of most engineering metals and alloys. A modified Johnson-Cook model is devised in this letter to describe the constitutive behaviors of Field's metal. The proposed metal will facilitate the design and analysis of functional materials and structures consisting of Field's metal.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Liquid metals: fundamentals and applications in chemistry10.1039/C7CS00043J ↗
2. Morphing metal and elastomer bicontinuous foams for reversible stiffness, shape memory, and self-healing soft machines10.1002/adma.201505991 ↗
3. Enhanced variable stiffness and variable stretchability enabled by phase-changing particulate additives10.1002/adfm.201903368 ↗
4. Soft-matter composites with electrically tunable elastic rigidity10.1088/0964-1726/22/8/085005 ↗
5. Mechanically triggered composite stiffness tuning through thermodynamic relaxation (ST3R)10.1039/C8MH00032H ↗
6. Ultrastretchable elastic shape memory fibers with electrical conductivity10.1002/advs.201901579 ↗
7. Variable stiffness fiber with self-healing capability10.1002/adma.201602580 ↗
8. Microsolidics: Fabrication of three-dimensional metallic microstructures in poly(dimethylsiloxane)10.1002/adma.200601787 ↗
9. Creating stiff tough and functional hydrogel composites with low-melting-point alloys10.1002/adma.201706885 ↗
10. Phase-changing metamaterial capable of variable stiffness and shape morphing10.1002/adem.201900802 ↗
11. F. Deng, Q.-K. Nguyen, P. Zhang, Multifunctional liquid metal lattice materials through hybrid design and manufacturing, Addit. Manuf. (n.d.).
12. H. Nakai, Y. Kuniyoshi, M. Inaba, H. Inoue, Metamorphic robot made of low melting point alloy, in: IEEERSJ Int. Conf. Intell. Robots Syst. IEEE, Lausanne, Switzerland, 2002, pp. 2025–2030, http://dx.doi.org/10.1109/IRDS.2002.1044053.10.1109/IRDS.2002.1044053 ↗
13. Variable stiffness material based on rigid low-melting-point-alloy microstructures embedded in soft poly(dimethylsiloxane) (PDMS)10.1039/c3ra44412k ↗
14. Smart soft composite actuator with shape retention capability using embedded fusible alloy structures10.1016/j.compositesb.2015.04.007 ↗
15. Extreme toughening of soft materials with liquid metal10.1002/adma.201706594 ↗
16. Toughening stretchable fibers via serial fracturing of a metallic core10.1126/sciadv.aat4600 ↗
17. Liu · 2018
18. A critical review of experimental results and constitutive descriptions for metals and alloys in hot working10.1016/j.matdes.2010.11.048 ↗
19. A critical review of constitutive models for solders in electronic packaging
20. Strength properties of the low-melting- point alloys
21. Nemat-Nasser · 2004
22. G. Johnson, W. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, in: Proc. 7th Int. Symp. Ballist. Den Haag, The Netherlands, 1983, pp. 541–543.
23. Constitutive equations for hot-working of metals10.1016/0749-6419(85)90004-X ↗
24. A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part II: Applications10.1016/j.ijplas.2008.11.005 ↗
25. Large inelastic deformation of glassy polymers. Part I: Rate dependent constitutive model10.1016/0167-6636(88)90003-8 ↗
26. A constitutive theory for metallic glasses at high homologous temperatures10.1016/j.actamat.2007.02.020 ↗
27. Constitutive modeling for elevated temperature flow behavior of 42CrMo steel10.1016/j.commatsci.2007.08.011 ↗
28. Simulia, Abaqus Analysis User’s Guide, 2019.