Material model parameter estimation with genetic algorithm optimization method and modeling of strain and temperature dependent behavior of epoxy resin with cooperative-VBO model
Source abstract
Abstract
Abstract A constitutive model is proposed for modeling rate and temperature dependent stress-strain behavior of amorphous polymers. The model developed here is a modification of cooperative-viscoplasticity theory based on overstress (VBO) model. The modifications are performed to capture the temperature dependent behaviors below and through the glass transition temperature (Tg) of amorphous polymers as well as rate dependency from quasi static to high strain rate loading. In the proposed constitutive model, adiabatic heating due to high strain rate deformations is included to capture the high strain rate behaviors. The temperature dependent behavior below, around and through Tg will be captured with the modifications performed on the viscoplastic strain rate. The model has been shown to be predictive of compression behavior of DER 353 epoxy at quasi and high strain rates and a temperature range from room to Tg. The genetic algorithm (GA) parameter optimization procedure has been proposed to determine material parameters of the models. The model parameters are determined using GA optimization method. The newly modified model is able to capture the mechanical behavior below and through Tg and also all of the features of the large strain behavior, including the initial modulus, yield stress, strain softening and strain hardening.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Polymer crystallization and properties · Force Microscopy Techniques and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. On the determination of material parameters for internal variable thermoelastic–viscoplastic constitutive models10.1016/j.ijplas.2006.09.002 ↗
2. Cooperative-VBO model for polymer/graphene nanocomposites10.1016/j.mechmat.2018.06.005 ↗
3. Biaxial ratcheting of ultrahigh molecular weight polyethylene. Eperiments and constitutive modeling10.1520/JTE20130131 ↗
4. Yielding behavior of model epoxy matrices for fiber reinforced composites: effect of strain rate and temperature10.1080/00222340500393881 ↗
5. Large Inelastic deformation of glassy polymers. Part I: rate dependent constitutive model
6. Cakir · 2003
7. Modeling of uniaxial and biaxial ratcheting behavior of 1026 Carbon steel using the simplified viscoplasticity theory based on overstress (VBO)10.1007/s00707-002-0966-1 ↗
8. Modeling of large simple shear using a viscoplastic overstress model and classical plasticity model with different objective stress rates10.1007/s00707-003-0068-8 ↗
9. Viscoplasticity theory applied to proportional and non-proportional cyclic loading at small strains10.1016/j.ijplas.2003.07.002 ↗
10. Modeling deformation behavior of polymers with viscoplasticity theory based on overstress10.1016/j.ijplas.2004.04.004 ↗
11. Cooperative viscoplasticity theory based on overstess approach for modeling large deformation behavior of amorphous polymers10.1002/pi.4591 ↗
12. High density polyethylene (HDPE): experiments and modeling10.1007/s11043-007-9026-5 ↗
13. Viscosity, plasticity, and diffusion as examples of absolute reaction rates10.1063/1.1749836 ↗
14. Material modeling and ballistic-resistance analysis of armor-grade composites reinforced with high-performance fibers10.1007/s11665-009-9370-5 ↗
15. The effect of chain structure on the annealing and deformation behavior of polymers10.1007/BF01384357 ↗
16. Determination of temperature rise during high strain rate deformation10.1016/S0167-6636(97)00036-7 ↗
17. Viscoplasticity based on overstress with a differential growth law for the equilibrium stress10.1016/0167-6636(86)90014-1 ↗
18. Inelastic heat fraction evaluation for engineering problems involving dynamic plastic localization phenomena10.2140/jomms.2009.4.319 ↗
19. Mechanics of the rate-dependent elastic–plastic deformation of glassy polymers from low to high strain rates10.1016/j.ijsolstr.2005.04.016 ↗
20. Transient heat generation and thermo-mechanical response of epoxy resin under adiabatic impact compressions10.1016/j.ijheatmasstransfer.2015.12.072 ↗
21. Reeves · 2002
22. Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: characterization and modeling of the compressive yield stress10.1016/j.ijsolstr.2005.06.040 ↗
23. A formulation of the cooperative model for the yield stress of amorphous polymers for a wide range of strain rates and temperatures10.1016/j.polymer.2005.05.079 ↗
24. Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates10.1016/j.ijsolstr.2007.05.018 ↗
25. Free volume, molecular mobility and polymer structure: towards the rational design of multi-functional materials10.12693/APhysPolA.125.801 ↗
26. Experimental investigation of strain rate and temperature dependent response of an epoxy resin undergoing large deformation10.1007/s40870-018-0144-8 ↗
27. Thermoset epoxy, 2019. http://www.substech.com/dokuwiki/doku.php?id=thermoset_epoxy_ep.
28. Van Krevelen · 1990
29. Constitutive equations for thermomechanical deformations of glassy polymers10.1016/j.ijsolstr.2009.08.006 ↗
30. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids10.1021/ja01619a008 ↗
31. Mechanical behavior of liquid nitrile rubber-modified epoxy resin: experiments, constitutive model and application10.1016/j.ijmecsci.2018.11.003 ↗