journal article·2020-12Open access

A phenomenological constitutive model for the viscoelastic deformation of elastomers

Vinotharan Annarasa, Atanas A. Popov, Davide S. A. De Focatiis

Abstract

Abstract This study proposes a one-dimensional constitutive model for elastomeric materials based on recent observations regarding the separation of elastic and viscous contributions in uniaxial cyclic tensile experiments on EPDM rubber. The focus is on capturing the changes in constitutive behavior and energy dissipation associated with the Mullins effect. In the model, this is achieved through the evolution of both permanent set and hyperelastic parameters of an Edwards-Vilgis function to account for the Mullins effect, and with a viscosity associated with the effective stretch rate of the network to describe the non-linear flow stress. The simulations are able to reproduce the observed constitutive response and its change with increasing levels of pre-deformation. The model is less able to accurately reproduce the virgin loading response, which is achieved via extrapolation to zero pre-strain. However, for practical purposes, where scragging of elastomeric products is the norm, the model is able to predict the cyclic response and the dissipated energy, and their change with different scragging levels in good agreement with experimental data.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Elasticity and Material Modeling · Rheology and Fluid Dynamics Studies · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Bergström, J.S.S., Boyce, M.C.C.: Constitutive modeling of the large strain time-dependent behavior of elastomers. J. Mech. Phys. Solids 46, 931–954 (1998). https://doi.org/10.1016/S0022-5096(97)00075-610.1016/S0022-5096(97)00075-6 ↗
2. Clough, J.M., Creton, C., Craig, S.L., Sijbesma, R.P.: Covalent bond scission in the Mullins effect of a filled elastomer: real-time visualization with mechanoluminescence. Adv. Funct. Mater. 26, 9063–9074 (2016). https://doi.org/10.1002/adfm.20160249010.1002/adfm.201602490 ↗
3. Corby, M., De Focatiis, D.S.A.: Reversibility of the Mullins effect for extending the life of rubber components. Plast. Rubber Compos. 48, 24–31 (2019). https://doi.org/10.1080/14658011.2018.144338410.1080/14658011.2018.1443384 ↗
4. De Focatiis, D.S.A., Buckley, C.P.: The initiation of environmental stress crazes in polystyrene with process induced anisotropy. In: Proceedings of the 22nd Annual Meeting of the Polymer Processing Society, 2–6 July 2006, Yamagata, Japan (2006)
5. De Focatiis, D.S.A., Buckley, C.P., Abraham, F.: Multiaxial viscoelastic deformation of carbon-black filled EPDM rubber. In: Heinrich, G., Kaliske, M., Lion, A., Reese, S. (eds.) Constitutive Models for Rubber VI, pp. 187–192. Taylor & Francis, Dresden (2009)
6. Diani, J., Brieu, M., Gilormini, P.: Observation and modeling of the anisotropic visco-hyperelastic behavior of a rubberlike material. Int. J. Solids Struct. (2006). https://doi.org/10.1016/j.ijsolstr.2005.06.04510.1016/j.ijsolstr.2005.06.045 ↗
7. Diani, J., Fayolle, B., Gilormini, P.: A review on the Mullins effect. Eur. Polym. J. 45, 601–612 (2009). https://doi.org/10.1016/j.eurpolymj.2008.11.01710.1016/j.eurpolymj.2008.11.017 ↗
8. Dorfmann, A., Ogden, R.W.: A constitutive model for the Mullins effect with permanent set in particle-reinforced rubber. Int. J. Solids Struct. 41, 1855–1878 (2004). https://doi.org/10.1016/j.ijsolstr.2003.11.01410.1016/j.ijsolstr.2003.11.014 ↗
9. Edwards, S.F., Vilgis, T.: The effect of entanglements in rubber elasticity. Polym. Commun. (Guildf.) 27, 483–492 (1986). https://doi.org/10.1016/0032-3861(86)90231-410.1016/0032-3861(86)90231-4 ↗
10. Fernandes, V.A.: Manifestations of the Mullins effect in filled elastomers (2016). http://eprints.nottingham.ac.uk/32301/
11. Fernandes, V.A., De Focatiis, D.S.A.: A swelling study of process-induced and deformation-induced anisotropy of filled rubbers. In: Const. Model. Rubbers IX, pp. 141–146 (2015). https://doi.org/10.1201/b18701-2810.1201/b18701-28 ↗
12. Fukahori, Y.: New progress in the theory and model of carbon black reinforcement of elastomers. J. Appl. Polym. Sci. 95, 60–67 (2005). https://doi.org/10.1002/app.2080210.1002/app.20802 ↗
13. Göktepe, S., Miehe, C.: A micro-macro approach to rubber-like materials. Part III: the micro-sphere model of anisotropic Mullins-type damage. J. Mech. Phys. Solids 53, 2259–2283 (2005). https://doi.org/10.1016/j.jmps.2005.04.01010.1016/j.jmps.2005.04.010 ↗
14. Hanson, D.E., Hawley, M., Houlton, R., Chitanvis, K., Rae, P., Orler, E.B., Wrobleski, D.A.: Stress softening experiments in silica-filled polydimethylsiloxane provide insight into a mechanism for the Mullins effect. Polym. Commun. (Guildf.) 46, 10989–10995 (2005). https://doi.org/10.1016/j.polymer.2005.09.03910.1016/j.polymer.2005.09.039 ↗
15. Haward, R.N., Thackray, G.: The use of a mathematical model to describe isothermal stress-strain curves in glassy thermoplastics. Proc. R. Soc. A, Math. Phys. Eng. Sci. 302, 453–472 (1968). https://doi.org/10.1098/rspa.1968.002910.1098/rspa.1968.0029 ↗
16. Houwink, R.: Slipping of molecules during the deformation of reinforced rubber. Rubber Chem. Technol. 29, 888–893 (1956). https://doi.org/10.5254/1.354260210.5254/1.3542602 ↗
17. Itskov, M., Ehret, A.E., Kazakevičiute-Makovska, R., Weinhold, G.W.: A thermodynamically consistent phenomenological model of the anisotropic Mullins effect. Z. Angew. Math. Mech. (2010). https://doi.org/10.1002/zamm.20090027910.1002/zamm.200900279 ↗
18. Jalocha, D., Constantinescu, A., Neviere, R.: Prestrain-dependent viscosity of a highly filled elastomer: experiments and modeling. Mech. Time-Depend. Mater. 19, 243–262 (2015). https://doi.org/10.1007/s11043-015-9262-z10.1007/s11043-015-9262-z ↗
19. Kraus, G., Childers, C.W., Rollmann, K.W.: Stress softening in carbon black-reinforced vulcanizates. Strain rate and temperature effects. J. Appl. Polym. Sci. 10, 229–244 (1966). https://doi.org/10.1002/app.1966.07010020510.1002/app.1966.070100205 ↗
20. Maher, E., Creane, A., Lally, C., Kelly, D.J.: An anisotropic inelastic constitutive model to describe stress softening and permanent deformation in arterial tissue. J. Mech. Behav. Biomed. Mater. 12, 9–19 (2012). https://doi.org/10.1016/j.jmbbm.2012.03.00110.1016/j.jmbbm.2012.03.001 ↗
21. Marckmann, G., Verron, E., Gornet, L., Chagnon, G., Charrier, P., Fort, P.: A theory of network alteration for the Mullins effect. J. Mech. Phys. Solids 50, 2011–2028 (2002). https://doi.org/10.1016/s0022-5096(01)00136-310.1016/s0022-5096(01)00136-3 ↗
22. Merckel, Y., Diani, J., Brieu, M., Caillard, J.: Constitutive modeling of the anisotropic behavior of Mullins softened filled rubbers. Mech. Mater. (2013). https://doi.org/10.1016/j.mechmat.2012.10.01010.1016/j.mechmat.2012.10.010 ↗
23. Mullins, L.: Effect of Stretching on the Properties of Rubber (1948). http://rubberchemtechnol.org/doi/abs/10.5254/1.3546914?journalCode=rcat10.5254/1.3546914 ↗
24. Mullins, L.: Permanent set in vulcanized rubber. Rubber Chem. Technol. 22, 1036–1044 (1949). https://doi.org/10.5254/1.354301010.5254/1.3543010 ↗
25. Mullins, L., Tobin, N.R.: Theoretical model for the elastic behavior of filler-reinforced vulcanized rubbers. Rubber Chem. Technol. 30, 555–571 (1957). https://doi.org/10.5254/1.354270510.5254/1.3542705 ↗
26. Mullins, L., Tobin, N.R.: Stress softening in rubber vulcanizates. Part I. Use of a strain amplification factor to describe the elastic behavior of filler-reinforced vulcanized rubber. J. Appl. Polym. Sci. 9, 2993–3009 (1965). https://doi.org/10.1002/app.1965.07009090610.1002/app.1965.070090906 ↗
27. Peña, E.: Computational aspects of the numerical modelling of softening, damage and permanent set in soft biological tissues. Comput. Struct. 130, 57–72 (2014). https://doi.org/10.1016/j.compstruc.2013.10.00210.1016/j.compstruc.2013.10.002 ↗
28. Prisacariu, C., Buckley, C.P., Caraculacu, A.A.: Mechanical response of dibenzyl-based polyurethanes with diol chain extension. Polym. Commun. (Guildf.) 46, 3884–3894 (2005). https://doi.org/10.1016/j.polymer.2005.03.04610.1016/j.polymer.2005.03.046 ↗
29. Qi, H.J., Boyce, M.C.: Constitutive model for stretch-induced softening of the stress-stretch behavior of elastomeric materials. J. Mech. Phys. Solids 52, 2187–2205 (2004). https://doi.org/10.1016/j.jmps.2004.04.00810.1016/j.jmps.2004.04.008 ↗
30. Rebouah, M., Machado, G., Chagnon, G., Favier, D.: Anisotropic Mullins stress softening of a deformed silicone holey plate. Mech. Res. Commun. (2013). https://doi.org/10.1016/j.mechrescom.2013.02.00210.1016/j.mechrescom.2013.02.002 ↗
31. Rendek, M., Lion, A.: Amplitude dependence of filler-reinforced rubber: experiments, constitutive modelling and FEM—implementation. Int. J. Solids Struct. 47, 2918–2936 (2010). https://doi.org/10.1016/j.ijsolstr.2010.06.02110.1016/j.ijsolstr.2010.06.021 ↗
32. Senden, D.J.A., Van Dommelen, J.A.W., Govaert, L.E.: Strain hardening and its relation to Bauschinger effects in oriented polymers. J. Polym. Sci., Part B, Polym. Phys. (2010). https://doi.org/10.1002/polb.2205610.1002/polb.22056 ↗
33. Simo, J.C.: On a fully three-dimensional finite-strain viscoelastic damage model: formulation and computational aspects. Comput. Methods Appl. Mech. Eng. 60, 153–173 (1987). https://doi.org/10.1016/0045-7825(87)90107-110.1016/0045-7825(87)90107-1 ↗