Experimental characterization and stochastic models for time-dependent rupture of thin-ply composite laminates
Source abstract
Abstract
Thin-laminate composites with thicknesses below 200 mu m hold significant promise for future, larger, and lighter deployable structures. This paper presents a study of the time-dependent failure behavior of thin carbon-fiber laminates under bending, focusing on establishing a fundamental material-level understanding of this type of failure. A novel test method was developed, enabling in-situ micro-CT imaging during long-term bending. Time-to-rupture experiments revealed the stochastic nature of failure, prompting a statistical approach to account for initial imperfections. The total probability of failure was calculated using separate Weibull functions for instantaneous and delayed time-dependent failures. The resulting function, dependent on curvature and aging time, is a design guideline for the design of future deployable space structures. Time-lapse micro-CT imaging identified kink bands and fiber-matrix debonding as primary failure mechanisms, providing essential insights for the design optimization of composite laminates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Adams, D.S., Mobrem, M.: Lenticular jointed antenna deployment anomaly and resolution onboard the Mars express spacecraft. J. Spacecr. Rockets 46(2), 403–410 (2009)10.2514/1.36891 ↗
2. Aguirre, M.: The collapsible tube mast (CTM). In: 2nd European Space Mechanisms and Tribology Symposium, pp. 75 (1985)
3. Argon, A.: Fracture of composites. In: Treatise on Materials Science & Technology, vol. 1, pp. 79–114. Elsevier, Amsterdam (1972)
4. Arya, M., Lee, N., Pellegrino, S.: Ultralight structures for space solar power satellites. In: 3rd AIAA Spacecraft Structures Conference, 1950 (2016)
5. Brinkmeyer, A., Pellegrino, S., Weaver, P.M.: Effects of long-term stowage on the deployment of bistable tape springs. J. Appl. Mech. 83(1), 011008 (2016)10.1115/1.4031618 ↗
6. Brinson, H.F., Brinson, L.C.: Polymer Engineering Science and Viscoelasticity. Springer, Berlin (2015)10.1007/978-1-4899-7485-3 ↗
7. Budiansky, B.: Micromechanics. Comput. Struct. 16(1–4), 3–12 (1983)10.1016/0045-7949(83)90141-4 ↗
8. Budiansky, B., Fleck, N.A.: Compressive failure of fibre composites. J. Mech. Phys. Solids 41(1), 183–211 (1993)10.1016/0022-5096(93)90068-Q ↗
9. Budiansky, B., Fleck, N.A.: Compressive kinking of fiber composites: a topical review. Appl. Mech. Rev. 47(6S), S246–S250 (1994). https://doi.org/10.1115/1.312441710.1115/1.3124417 ↗
10. Budiansky, B., Fleck, N., Amazigo, J.: On kink-band propagation in fiber composites. J. Mech. Phys. Solids 46(9), 1637–1653 (1998)10.1016/S0022-5096(97)00042-2 ↗
11. Daniel, I.M., Ishai, O.,et al.: Engineering Mechanics of Composite Materials, vol. 1994. Oxford University Press, New York (2006)
12. Daukantas, P.: Breakthrough starshot. Opt. Photonics News 28(5), 26–33 (2017)10.1364/OPN.28.5.000026 ↗
13. Engelbrecht-Wiggans, A., Phoenix, S.L.: A stochastic model based on fiber breakage and matrix creep for the stress-rupture failure of unidirectional continuous fiber composites. Int. J. Fract. 217(1), 1–34 (2019). https://doi.org/10.1007/s10704-019-00359-910.1007/s10704-019-00359-9 ↗
14. Fernandez, J.M., Murphey, T.W.: A simple test method for large deformation bending of thin high strain composite flexures. In: 2018 AIAA Spacecraft Structures Conference, 0942 (2018)
15. Fleck, N.: Compressive failure of fiber composites. Adv. Appl. Mech. 33(6), 7 (1997)
16. Flügge, W.: Viscoelasticity. Springer, Berlin (2013)
17. Garcea, S., Wang, Y., Withers, P.: X-ray computed tomography of polymer composites. Compos. Sci. Technol. 156, 305–319 (2018)10.1016/j.compscitech.2017.10.023 ↗
18. Gdoutos, E., Sommer, C.F., Truong, A., et al.: Development of the Deployable on-Orbit ultraLight Composite Experiment (DOLCE) for the space solar power project demonstration mission. In: AIAA SciTech Forum, 1266 (2022)
19. Hamillage, M.Y., Klimm, W., Kwok, K., et al.: Shape recovery simulation of viscoelastic thin-ply composite coilable booms. Acta Astronaut. 215, 607–617 (2024). https://doi.org/10.1016/j.actaastro.2023.12.04210.1016/j.actaastro.2023.12.042 ↗
20. Jones, R.M.: Mechanics of Composite Materials, 2nd edn. CRC Press, Boca Raton (1991). https://doi.org/10.1201/978149871106710.1201/9781498711067 ↗
21. Kleinbaum, D.G., Klein, M.: Survival Analysis a Self-Learning Text. Springer, Berlin (1996)
22. Kwok, K., Pellegrino, S.: Viscoelastic effects in tape-springs. In: 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 2022 (2011)
23. Kwok, K., Pellegrino, S.: Micromechanics models for viscoelastic plain-weave composite tape springs. AIAA J. 55(1), 309–321 (2017)10.2514/1.J055041 ↗
24. Leclerc, C., Pellegrino, S.: Reducing stress concentration in the transition region of coilable ultra-thin-shell booms. In: AIAA SciTech 2019 Forum, 1522 (2019)
25. Li, J., Kwok, K., Pellegrino, S.: Large-strain thermoviscoelastic model of stratofilm. Mech. Time-Depend. Mater. (2016)
26. Maire, E., Withers, P.J.: Quantitative X-ray tomography. Int. Mater. Rev. 59(1), 1–43 (2014)10.1179/1743280413Y.0000000023 ↗
27. Mallikarachchi, H., Pellegrino, S.: Design of ultrathin composite self-deployable booms. J. Spacecr. Rockets 51(6), 1811–1821 (2014)10.2514/1.A32815 ↗
28. Marsh, G.: Prepregs—raw material for high-performance composites. J. Reinf. Plast. Compos. 46(10), 24–28 (2002)10.1016/S0034-3617(02)80172-2 ↗
29. Medina, K., Rose, T., Francis, W.: Long-term stress rupture limitations of unidirectionasl high strain composites in bending. In: Proceedings of the American Society for Composites—Thirty-Third Technical Conference (2018)
30. Miyano, Y., Nakada, M.: Durability of Fiber-Reinforced Polymers. Wiley, New York (2018)
31. Miyano, Y., Nakada, M.: Accelerated testing methodology for durability of CFRP. Composites, Part B, Eng. 191 (2020). https://doi.org/10.1016/j.compositesb.2020.10797710.1016/j.compositesb.2020.107977 ↗
32. Mobrem, M., Adams, D.S.: Deployment analysis of the lenticular jointed antennas onboard the Mars express spacecraft. J. Spacecr. Rockets 46(2), 394–402 (2009)10.2514/1.36890 ↗
33. Murphey, T.W., Banik, J.: Triangular rollable and collapsible boom. US Patent 7,895,795, (2011)
34. Murphey, T.W., Francis, W., Davis, B., et al.: High strain composites. In: 2nd AIAA Spacecraft Structures Conference, 0942 (2015)
35. Pappas, G.A., Schlothauer, A., Ermanni, P.: Bending failure analysis and modeling of thin fiber reinforced shells. Compos. Sci. Technol. 216, 108979 (2021)10.1016/j.compscitech.2021.108979 ↗
36. Phoenix, S.L., Schwartz, P., Robinson, H.: Statistics for the strength and lifetime in creep-rupture of model carbon/epoxy composites. Compos. Sci. Technol. 32(2), 81–120 (1988)10.1016/0266-3538(88)90001-2 ↗
37. Pratt, V.: Direct least-squares fitting of algebraic surfaces. Comput. Graph. 21(4), 145–152 (1987)10.1145/37402.37420 ↗
38. Rimrott, F.P.J.: Storable tubular extendible member: a unique machine element. Mach. Des. 37(28), 156–165 (1965)
39. Rose, T.J., Medina, K., Francis, W., et al.: Viscoelastic behavior of high strain composites. In: AIAA/ASME/ASCE/AHS/ASC High-Strain Composite Materials and Structures, vol. II (2019)
40. Rosen, B.W.: Mechanics of composite strengthening. In: Fiber Composite Materials. American Society for Metals (1965)
41. Sanford, G., Biskner, A., Murphey, T.: Large strain behavior of thin unidirectional composite flexures. In: 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 18th AIAA/ASME/AHS Adaptive Structures Conference 12th, 2698 (2010)
42. Schlothauer, A.: Resilient thin shell composites for extremely deformable structures. PhD thesis, ETH, Zurich (2021)
43. Slaughter, W.S., Fleck, N.A.: Viscoelastic microbuckling of fiber composites. J. Appl. Mech. 60(4), 802–806 (1993). https://doi.org/10.1115/1.290098610.1115/1.2900986 ↗
44. Sullivan, J.: Creep and physical aging of composites. Compos. Sci. Technol. 39(3), 207–232 (1990)10.1016/0266-3538(90)90042-4 ↗
45. Ubamanyu, U.K.: Time-dependent failure of thin-ply composite laminates. PhD thesis, California Institute of Technology (2023)
46. Ubamanyu, K., Pellegrino, S.: Micromechanics modeling of time-dependent failure of stowed high-strain composite structures. In: AIAA SciTech Forum, 0649 (2022)
47. Ubamanyu, K., Ghedalia, D., Hasanyan, A.D., et al.: Experimental study of time-dependent failure of high strain composites. In: AIAA SciTech Forum, 0207 (2020)
48. Violette, M.G., Schapery, R.: Time-dependent compressive strength of unidirectional viscoelastic composite materials. Mech. Time-Depend. Mater. 6(2), 133–145 (2002). https://doi.org/10.1023/A:101501502391110.1023/A:1015015023911 ↗
49. Vogler, T., Hsu, S.Y., Kyriakides, S.: On the initiation and growth of kink bands in fiber composites. Part II analysis. Int. J. Solids Struct. 38(15), 2653–2682 (2001)10.1016/S0020-7683(00)00175-X ↗
50. Waas, A.M., Schultheisz, C.R.: Compressive failure of composites, part ii: experimental studies. Prog. Aerosp. Sci. 32(1), 43–78 (1996)10.1016/0376-0421(94)00003-4 ↗
51. Weibull, W.: A statistical theory of strength of materials. IVB-Handl (1939)
52. Willems, P., Shaklan, S., Hu, R., et al.: NASA’s starshade technology development activity. In: Space Telescopes and Instrumentation 2022: Optical, Infrared, and Millimeter Wave, SPIE, pp. 931–949 (2022)
53. Yee, J., Pellegrino, S.: Biaxial bending failure locus for woven-thin-ply carbon fibre reinforced plastic structures. In: 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 1811 (2005)