journal article·2021-12-23Open access

Preparation of Sodalite and Faujasite Clay Composite Membranes and Their Utilization in the Decontamination of Dye Effluents

Abderrazek El-kordy, Abdelaziz Elgamouz, El Mokhtar Lemdek, Najib Tijani, Salman S. Alharthi, Abdel-Nasser Kawde, Ihsan Shehadi

Membranes· Volume 12· Issue 1

Abstract

The present work describes the deposition of two zeolite films, sodalite and faujasite, by the hydrothermal method to tune the mesopores of clay support, which are prepared from a widely available clay depot from the central region of Morocco (Midelt). The clay supports were prepared by a powder metallurgy method from different granulometries with activated carbon as a porosity agent, using uniaxial compression followed by a sintering process. The 160 µm ≤ Φ ≤ 250 µm support showed the highest water flux compared to the supports made from smaller granulometries with a minimum water flux of 1405 L.m−2·h−1 after a working time of 2 h and 90 min. This support was chosen for the deposition of sodalite (SOM) and faujasite (FAM) zeolite membranes. The X-ray diffraction of sodalite and faujasite showed that they were well crystallized, and the obtained spectra corresponded well with the sought phases. Such findings were confirmed by the SEM analysis, which showed that SOM was crystalized as fine particles while the FAM micrographs showed the existence of crystals with an average size ranging from 0.53 µm to 1.8 µm with a bipyramidal shape and a square or Cubo octahedral base. Nitrogen adsorption analysis showed that the pore sizes of the supports got narrowed to 2.28 nm after deposition of sodalite and faujasite. The efficiencies of SOM and FAM membranes were evaluated by filtration tests of solutions containing methyl orange (MO) using a flow loop, which were developed for dead-end filtration. The retention of methylene orange (MO) followed the order: SOM > FAM > 160 µm ≤ Φ ≤ 250 µm clay support with 55%, 48% and 35%, respectively. Size exclusion was the predominant mechanism of filtration of MO through SOM, FAM, and the support. However, the charge repulsion between the surface of the membrane and the negatively charged MO have not been ruled out. The point of zero charge (pzc) of the clay support, SOM and FAM membrane were pHpzc = 9.4, pHpzc = 10.6, and pHpzc = 11.4, respectively. Filtrations of MO were carried out between pH = 5.5 and pH = 6.5, which indicated that the surface of the membranes was positively charged while MO was negatively charged. The interaction of MO with the membranes might have happened through its vertical geometry.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Membrane Separation Technologies · Adsorption and biosorption for pollutant removal · Environmental remediation with nanomaterials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Laboratory of Materials, Membranes, and Nanotechnology, Department of Chemistry, Faculty of Sciences, Moulay Ismail University, PB 11201, Zitoune, P.O. Box 11201, Meknes 50050, Morocco

Pure and Applied Chemistry Group, Department of Chemistry, College of Sciences, University of Sharjah, Sharjah P.O. Box 27272, United Arab Emirates

Department of Chemistry, College of Science, Taif University, P.O. Box 11099, Taif 21944, Saudi Arabia

Funding

Ministry of Higher Education Morocco · Le Centre National pour la Recherche Scientifique et Technique (CNRST), Morocco

References (43)

Show source-provided references
1. A review on the water problem associate with organic pollutants derived from phenol, methyl orange, and remazol brilliant blue dyes10.1016/j.matpr.2021.01.258 ↗
2. Biodegradation of synthetic dyes of textile effluent by microorganisms: An environmentally and economically sustainable approach10.1556/1886.2019.00018 ↗
3. Adsorption of phenol on environmentally friendly Fe3O4/chitosan/zeolitic imidazolate framework-8 nanocomposite: Optimization by experimental design methodology10.1016/j.molliq.2020.115064 ↗
4. Characterization and potential of two different anaerobic mixed microflora for bioenergy recovery and decolorization of textile wastewater: Effect of C/N ratio, dye concentration and Ph
5. Synthesis of mesoporous silica nanoparticle from banana peel ash for removal of phenol and methyl orange in aqueous solution10.1016/j.matpr.2019.11.004 ↗
6. Textiles dyes as a source of wastewater contamination: Screening of the toxicity and treatment methods
7. Comparison of stress, strain, and elastic properties for porous silicon layers supported by substrate and corresponding membranes10.1016/j.molstruc.2016.04.061 ↗
8. Incorporation effect of olive pomace on the properties of tubular membranes10.1016/j.jece.2020.103668 ↗
9. Investigation of fixed-bed photocatalytic membrane reactors based on submerged ceramic membranes10.1016/j.ces.2018.06.062 ↗
10. Membrane fouling in photocatalytic membrane reactors (PMRs) for water and wastewater treatment: A critical review10.1016/j.cej.2016.05.071 ↗
11. Manufacture and characterization of flat membrane supports based on Moroccan Rif clay10.1016/j.matpr.2020.11.638 ↗
12. From a naturally occurring material (clay mineral) to the production of porous ceramic membranes10.1016/j.micromeso.2018.05.030 ↗
13. Dataset in the production of composite clay-zeolite membranes made from naturally occurring clay minerals10.1016/j.dib.2018.06.117 ↗
14. Recent trends of heavy metal removal from water/wastewater by membrane technologies10.1016/j.jiec.2019.03.029 ↗
15. Tubular thermal crosslinked-PEBA/ceramic membrane for aromatic/aliphatic pervaporation10.1016/j.memsci.2015.03.037 ↗
16. Heavy metals and color retention by a synthesized inorganic membrane10.1016/j.arabjc.2012.11.017 ↗
17. Removal of pollutants from indoor air using zeolite membranes10.1016/j.memsci.2004.05.004 ↗
18. Acid and alkali treatments for regulation of hydrophilicity/hydrophobicity of natural zeolite10.1016/j.apsusc.2019.01.263 ↗
19. Enhanced removal efficiency of NaY zeolite toward phenol from aqueous solution by modification with nickel (Ni-NaY)10.1016/j.jscs.2021.101224 ↗
20. AFM characterization of the growth of MFI-type zeolite films on alumina substrates10.1016/j.micromeso.2004.03.020 ↗
21. Cationization of cotton for industrial scale salt-free reactive dyeing of garments10.1007/s10098-017-1425-y ↗
22. Characterization of the firing behaviour of an illite-kaolinite clay mineral and its potential use as membrane support10.1016/j.heliyon.2019.e02281 ↗
23. Synthesis of sodalite octahydrate zeolite-clay composite membrane and its use in separation of SDS10.1016/j.memsci.2007.10.033 ↗
24. Crystal structures of the hydro-sodalite Na6 [AlSiO4] 6 8H2O and of the anhydrous sodalite Na6 [AlSiO4]10.1016/0144-2449(86)90064-3 ↗
25. Hydrothermal synthesis of zeolite A and Y membrane layers on clay flat disc support and their potential use in the decontamination of water polluted with toxic heavy metals10.5004/dwt.2020.25173 ↗
26. Chemical characterization and adsorption of oil mill wastewater on Moroccan clay in order to be used in the agricultural field10.1016/j.heliyon.2020.e03164 ↗
27. Characterization of ceramic pieces shaped from clay intended for the development of filtration membranes
28. Kinetic investigations of the oxidation of Methyl Orange and substituted arylazonaphthol dyes by peracids in aqueous solution10.1039/a807272h ↗
29. Photocatalytic degradation of methyl orange by TiO2-coated activated carbon and kinetic study10.1016/j.watres.2005.12.042 ↗
30. Rietveld-based mineralogical quantitation of deferrified oxisol clays10.1071/SR06123 ↗
31. Influences of synthesis conditions on preparation and characterization of Ti-MWW zeolite membrane by secondary hydrothermal synthesis10.1016/j.micromeso.2020.110004 ↗
32. Crystal structure of the zeolite mutinaite, the natural analog of ZSM-510.1016/S0144-2449(97)00124-3 ↗
33. Preparation and characterization of Na-A zeolite from aluminum scrub and commercial sodium silicate for the removal of Cd2 from water
34. Preparation and characterization of cationic surfactant modified zeolite adsorbent material for adsorption of organic and inorganic industrial pollutants10.1016/j.jece.2017.06.039 ↗
35. Preparation, mechanism and applications of oriented MFI zeolite membranes: A review10.1016/j.micromeso.2020.110790 ↗
36. Characterization of minerals in air dust particles in the state of Tamilnadu, India through ftir spectroscopy
37. Preparation, characterization, and determination of mechanical and thermal stability of natural zeolite-based foamed geopolymers10.1016/j.conbuildmat.2018.03.253 ↗
38. Liu, X., Mäki-Arvela, P., Aho, A., Vajglova, Z., Gun’ko, V.M., Heinmaa, I., Kumar, N., Eränen, K., Salmi, T., and Murzin, D.Y. (2018). Zeta potential of beta zeolites: Influence of structure, acidity, pH, temperature and concentration. Molecules, 23.10.3390/molecules23040946 ↗
39. Hierarchically porous carbon membranes derived from PAN and their selective adsorption of organic dyes10.1007/s10118-016-1723-6 ↗
40. Barakat, M.A., Selim, A.Q., Mobarak, M., Kumar, R., Anastopoulos, I., Giannakoudakis, D., Bonilla-Petriciolet, A., Mohamed, E.A., Seliem, M.K., and Komarneni, S. (2020). Experimental and Theoretical Studies of Methyl Orange Uptake by Mn–Rich Synthetic Mica: Insights into Manganese Role in Adsorption and Selectivity. Nanomaterials, 10.10.3390/nano10081464 ↗
41. Graphene oxide and titania hybrid Nafion membranes for efficient removal of methyl orange dye from water10.1016/j.carbon.2014.10.093 ↗
42. A stable metal-organic framework nanofibrous membrane as photocatalyst for simultaneous removal of methyl orange and formaldehyde from aqueous solution10.1016/j.colsurfa.2021.126359 ↗
43. Experimental study and numerical optimization for removal of methyl orange using polytetrafluoroethylene membranes in vacuum membrane distillation process10.1016/j.colsurfa.2021.128070 ↗