journal article·2000-03

Alloy design of FeMnSiCrNi shape-memory alloys related to stacking-fault energy

J. C. Li, M. Zhao, Q. Jiang

Publisher page

Abstract

The stacking-fault energy (γsf) of iron-based shape-memory alloys was calculated by the extended dislocation-node method. The results show that Ni and Mn increase the γsf of the alloys with an austenite structure, while Cr and Si decrease it. An expression relating the alloying elements of Ni, Cr, Mn, and Si to the γsf of the alloys is established. Moreover, in terms of the γsf values of the alloys and the Schaeffler diagram, the alloy design of iron-based shape-memory alloys is carried out. It is found that the alloy having the lowest γsf has the best shape-memory effect (SME), with a martensite transition temperature (Ms) being a little lower than ambient temperature. The corresponding composition of the alloy is located in the γ-phase zone near the phase line between the γ and γ+e phase zone and the triple point of α+γ+e in the Schaeffler diagram.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Shape Memory Alloy Transformations · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. A. Sato, E. Chishima, and Y. Yamaji: Acta Metall., 1984, vol. 32, pp. 539–47.10.1016/0001-6160(84)90065-8 ↗
2. A. Sato, Y. Yamaji, and T. Mori: Acta Metall., 1986, vol. 34, pp. 287–94.10.1016/0001-6160(86)90199-9 ↗
3. A.A. Hamers and C.M. Wayman: Scripta Metall. Mater., 1991, vol. 25, pp. 2723–26.10.1016/0956-716X(91)90146-R ↗
4. A. Federzoni and Q. Gu: Scripta Metall. Mater., 1994, vol. 26, pp. 25–31.10.1016/0956-716X(94)90089-2 ↗
5. J.C. Li, M. Zhao, and Q. Jiang: Chin. J. Mech. Eng., 1998, vol. 11, pp. 29–32.
6. J.C. Li, W. Zheng, and Q. Jiang: Mater. Lett., 1999, vol. 38, pp. 275–77.10.1016/S0167-577X(98)00172-4 ↗
7. H. Otsuka, H. Yamada, T. Maruyama, H. Tanahashi, S. Matsuda, and M. Murakami: Iron Steel Inst. Jpn. Int., 1990, vol. 30, pp. 674–79.10.2355/isijinternational.30.674 ↗
8. M. Murakami, H. Otsuka, and H. Suauki: Trans. Iron. Steel Inst. Jpn., 1987, vol. 27, pp. B83–86.
9. J.H. Yang, H. Chen, and C.M. Wayman: Metall. Trans. A, 1992, vol. 23A, pp. 1431–37.10.1007/BF02647326 ↗
10. J.H. Yang, H. Chen, and C.M. Wayman: Metall. Trans. A, 1992, vol. 23A, pp. 1439–44.10.1007/BF02647327 ↗
11. R. Fawley, M.A. Quader, and R.A. Dodd: Trans. TMS-AIME, 1968, vol. 242, pp. 771–76.
12. P.C.J. Gallagher: Metall. Trans., 1970, vol. 1, pp. 2429–61.10.1007/BF03038370 ↗
13. R.E. Schramm and R.P. Reed: Metall. Trans. A, 1975, vol. 6A, pp. 1345–51.10.1007/BF02641927 ↗
14. J.F. Breedis: Trans. TMS-AIME, 1964, vol. 230, pp. 1583–96.
15. B. Thomas and G. Henry: Mem. Sci. Rev. Met., 1967, vol. 64, pp. 625–36.
16. B.J. Thomas: Met. Corr. Industries, 1969, vol. 532, pp. 405–38.
17. O. Vingshro: Acta Metall., 1967, vol. 15, pp. 615–21.10.1016/0001-6160(67)90105-8 ↗
18. R.M. Latanision and A.W. Ruff: J. Appl. Phys., 1969, vol. 40, pp. 2716–20.10.1063/1.1658067 ↗
19. L.E. Murr: Thin Solid Films, 1969, vol. 4, pp. 389–412.10.1016/0040-6090(69)90089-3 ↗
20. L.M. Brown: Phil. Mag., 1964, vol. 10, pp. 441–66.10.1080/14786436408224223 ↗
21. E.D. Butakova, K.A. Malyshey, and N.I. Noskova: Fiz. Metall. Metalloved., 1973, vol. 35, pp. 662–44.
22. J.P. Hirth and J. Lothe: Theory of Dislocations, 2nd ed., Krieger Publishing, Malabar, FL, 1992, pp. 84–87.
23. X. Tian and Y.S. Zhang: Progr. Mater. Sci., 1991, vol. 5, pp. 48–51 (in Chinese).
24. A.L. Schaeffler: Met. Progr., 1949, vol. 56, pp. 680–81.
25. J.T. Cow and O.E. Harder: Trans. Am. Soc. Met., 1942, vol. 30, pp. 855–935.
26. W.T. Belong: Met. Progr., 1960, vol. 77, pp. 98–112.
27. D. Dulien and J. Nutting: Special Report, Iron and Steel Institute, London, 1964, vol. 86, pp. 140–45.