Microstructure and Microtexture Evolution of Pure Titanium during Single Direction Torsion and Alternating Cyclic Torsion
Source abstract
Abstract
Systematic experimental studies of microstructure and crystallographic texture of pure titanium during the Single Direction Torsion (SDT) and Alternating Cyclic Torsion (ACT) are carried out at room temperature. The microstructure evolution indicates that the grain size can be refined during SDT, while the grain morphology can be controlled during ACT. Also, lots of {10-12} and few {11-22} twins are observed and their area percentages increase with increasing torsion angles during SDT. The microtexture evolution states that the deformation texture first approaches to the B fiber (0, 90, 0 to 60 deg), and then stays away from B fiber (0, 90, 0 to 60 deg) with increasing plastic strain during SDT. The change of deformation texture is mainly attributed to the appearance of {10-12} twin. However, the deformation texture is always close to B fiber (0, 90, 0 to 60 deg) during ACT. Finally, the effects of different dislocation movements caused by SDT and ACT are discussed. Quantities of subgrains with high density dislocation are observed during SDT while the {10-12} and {11-22} twins intersect with each other, and high density dislocations distribute the twin during ACT.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. 1. T.R. Rautray, R. Narayanan, and K.H. Kim: Prog. Mater. Sci., 2011, vol. 56, pp. 1137-77.10.1016/j.pmatsci.2011.03.002 ↗
2. 2. T. Studt: R & D Magazine., 1996, vol. 38, pp. 28-31.
3. 3. B. Sulkowski, A. Panigrahi, K. Ozaltin, M. Lewandowska, B. Mikułowski, and M. Zehetbauer: J. Mater. Sci., 2014, vol. 49, pp. 6648-55.10.1007/s10853-014-8320-2 ↗
4. 4. J.Y. Kang, B. Bacroix, and R. Brenner: Scripta Mater., 2012, vol. 66, pp. 654-57.10.1016/j.scriptamat.2012.01.040 ↗
5. 5. T. Ungár, L.S. Tóth, J. Illy, and I. Kovács: Acta. Metall., 1986, vol. 34, pp. 1257-67.10.1016/0001-6160(86)90012-X ↗
6. 6. C.P. Wang, F.G. Li, J.H. Li, J.Z. Dong, and F.M. Xue: Mater. Sci. Eng. A, 2014, vol. 598, pp. 7-14.10.1016/j.msea.2013.12.079 ↗
7. 7. A.S.J. Alzubaydi, A.P. Zhilyaev, S.C. Wang, P. Kucita, and P.A.S. Reed: J. Mater. Sci., 2016, vol. 51, pp. 3380-89.10.1007/s10853-015-9652-2 ↗
8. 8. A.P. Zhilyaev, and T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893-979.10.1016/j.pmatsci.2008.03.002 ↗
9. 9. H. Zendehdel, and A. Hassani: Mater. Des., 2012, vol. 37, pp. 13-18.10.1016/j.matdes.2011.12.009 ↗
10. 10. N. Guo, B. Song, C. Guo, R.L. Xin, and Q. Liu: Mater. Des., 2015, vol. 83, pp. 270-75.10.1016/j.matdes.2015.06.071 ↗
11. 11. T.Z. Zhao, S.H. Zhang, G.L. Zhang, H.W. Song, and M. Cheng: Mater. Des., 2014, vol. 59, pp. 397-405.10.1016/j.matdes.2014.03.029 ↗
12. 12. S. Khamsuk, N. Park, H. Adachi, D. Terada, and N. Tsuji: J. Mater. Sci., 2012, vol. 47, pp. 7841-47.10.1007/s10853-012-6661-2 ↗
13. 13. T. Böhlke, A. Bertram, and E. Krempl: Int. J. Plasticity., 2003, vol. 19, pp. 1867-84.10.1016/S0749-6419(03)00043-3 ↗
14. 14. L. Duchêne, F.E. Houdaigui, and A.M. Habraken: Int. J. Plasticity., 2007, vol. 23, pp. 1417-38.10.1016/j.ijplas.2007.01.008 ↗
15. 15. P. Sanchez, A. Pochettino, T. Chauveau, and B. Bacroix: J. Nucl. Mater., 2001, vol. 298, pp. 329-39.10.1016/S0022-3115(01)00640-7 ↗
16. 16. B. Beausir, L.S. Tóth, F. Qods, and K.W. Neale: J. Eng. Mater. T-ASME, 2009, vol. 131, pp. 011108-22.10.1115/1.3030973 ↗
17. 17. B. Beausir, L.S. Tóth, and K.W. Neale: Acta. Mater., 2007, vol. 55, pp. 2695-2705.10.1016/j.actamat.2006.12.021 ↗
18. 18. S. Biswas, B. Beausir, L.S. Toth, and S. Suwas: Acta. Mater., 2013, vol. 61, pp. 5263-77.10.1016/j.actamat.2013.05.018 ↗
19. S. Suwas, and R.K. Ray: Crystallographic Texture of Materials, Springer, London, 2014, pp. 1–8.10.1007/978-1-4471-6314-5_1 ↗
20. P.D. Wu, H. Wang, and K.W. Neale: Int. J. Appl. Mech., 2012, vol. 4. pp. 1250024 (1-27).
21. W.J. Evans, J.P. Jones, and M.T. Whittaker: Int. J. Fatigue., 2005, vol. 27, pp. 1244-50.10.1016/j.ijfatigue.2005.06.045 ↗
22. O. M. Ivasishin, S.O. Kotrechko, O.V. Kucher, A.I. Ornatskty, and S.V. Shevchenko: Metallofizika I Noveĭshie Tekhnologii., 2009, vol. 31, pp. 687-99.
23. J.H. Li, F.G. Li, M. Z. Hussain, C.H. Wang, and L. Wang: Mater. Sci. Eng. A, 2014, vol. 610, pp. 181–87.10.1016/j.msea.2014.04.083 ↗
24. 24. Q.D. Wang, Y.J. Chen, M.P. Liu, J.B. Lin, and H.J. Roven: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2265-73.10.1016/j.msea.2009.11.065 ↗
25. 25. H. Chen, F.G. Li, S.S. Zhou, J.H. Li, C. Zhao, and Q. Wan: Mater. Sci. Eng. A, 2016, vol. 680, pp. 278-90.10.1016/j.msea.2016.10.106 ↗
26. 26. X.Q. Guo, W. Wu, P.D. Wu, H. Qiao, K. An, and P.K. Liaw: Scripta. Mater., 2013, vol. 69, pp. 319-22.10.1016/j.scriptamat.2013.05.010 ↗
27. 27. I.J. Beyerlein, and L.S. Tóth: Prog. Mater. Sci., 2009, vol. 54, pp. 427-510.10.1016/j.pmatsci.2009.01.001 ↗
28. 28. S.K. Sahoo, R.K. Sabat, S. Sahni, and S. Suwas: Mater. Des., 2016, vol. 91, pp. 58-71.10.1016/j.matdes.2015.11.073 ↗
29. 29. Y.J. Chen, Y.J. Li, J.C. Walmsley, S. Dumoulin, and H.J. Roven: Metall. Mater. Trans. A, 2010, vol. 41, pp. 787-94.10.1007/s11661-009-0040-x ↗
30. 30. H. Chen, F.G. Li, J.H. Li, X.K. Ma, J. Li, and Q. Wan: Mater. Sci. Eng. A, 2016, vol. 671, pp. 17-31.10.1016/j.msea.2016.06.046 ↗
31. 31. T. Sakai, A. Belyakov, R. Kaibyshev, H. Miura, and J.J. Jonas: Prog. Mater. Sci., 2014, vol. 60, pp. 130–207.10.1016/j.pmatsci.2013.09.002 ↗
32. 32. D.A. Hughes, and N. Hansen: Acta. Mater., 1997, vol. 45, pp. 3871-86.10.1016/S1359-6454(97)00027-X ↗
33. 33. J.A. Wert, Q. Liu, and N. Hansen: Acta. Metal. Mater., 1995, vol. 43, pp. 4153-63.10.1016/0956-7151(95)00097-F ↗
34. 34. I. Thomas, S. Zaefferer, F. Friedel, and D. Raabe: Adv. Eng. Mater., 2003, vol. 5, pp. 566-70.10.1002/adem.200300373 ↗
35. 35. R.L. Xin, X. Zheng, Z. Liu, D.J. Liu, R.S. Qiu, Z.Y. Li, and Q. Liu: J. Alloy. Compd., 2015, vol. 659, pp. 51-9.10.1016/j.jallcom.2015.11.034 ↗
36. 36. J.J. He, B. Jiang, Q.S. Yang, X. Li, X.S. Xia, and F.S. Pan: J. Alloy. Compd., 2015, vol. 621, pp. 301-06.10.1016/j.jallcom.2014.09.214 ↗
37. 37. J.W. Won, H.P. Chan, S.G. Hong, and S.L. Chong: J. Alloy. Compd., 2015, vol. 651, pp. 245-54.10.1016/j.jallcom.2015.08.075 ↗
38. G. Lütjering, and J.C. Williams: Engineering Materials & Processes., 2003, pp. 149–75.10.1007/978-3-540-71398-2_4 ↗
39. 39. S. Naka, A. Lasalmonie, P. Costa, and L.P. Kubin: Philos. Mag. A., 1988, vol. 57, pp. 717-40.10.1080/01418618808209916 ↗
40. 40. J.H. Li, F.G. Li, C. Zhao, H. Chen, X.K. Ma, and J. Li: Mater. Sci. Eng. A, 2016, vol. 656, pp. 142-50.10.1016/j.msea.2016.01.018 ↗
41. 41. L. Bao, C. Schuman, J.S. Lecomte, M.J. Philippe, X. Zhao, and C. Esling: Adv. Eng. Mater., 2011, vol. 13, pp. 928-32.10.1002/adem.201100055 ↗