Benchmark Al-Cu Solidification Experiments in Microgravity and on Earth
Source abstract
Abstract
Predicting macrosegregation and grain structure, including the columnar to equiaxed transition (CET), in alloy solidification is an ongoing challenge. Gravity-driven melt convection and transport of unattached solid grains complicate such efforts. Cylindrical samples of aluminum alloys containing 4, 10, and 18 wt pct copper are solidified from the bottom upwards on Earth and in microgravity conditions aboard the International Space Station. The chosen alloys possess primary solid densities that are greater than, equal to, and less than their melt densities promoting different gravity-driven solid transport phenomena. Significant differences in grain structure are observed between microgravity and terrestrial samples. All microgravity samples are entirely equiaxed, while the terrestrial samples exhibit a CET. The columnar grains near the cooled surface in the terrestrial samples can only be attributed to melt convection. The Al-4 wt pct Cu terrestrial sample shows evidence of grain sedimentation, while the Al-18 wt pct Cu terrestrial sample exhibits the effects of grain floatation. Measurements of eutectic fraction and solute concentration in the samples show inverse segregation due to shrinkage-driven flow in all samples. Terrestrially solidified samples have areas of high solute concentration that are not uniformly distributed over the diameter, indicating the presence of melt convection. The eutectic and macrosegregation measurements generally have good correspondence. Temperature, grain structure, eutectic fraction, and macrosegregation data are presented as benchmark data to validate future modeling efforts. Heat flux boundary conditions on the sample are determined using thermal modeling. Thermal process parameters are calculated for all samples.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. C. Beckermann and R. Viskanta: PCH PhysicoChem. Hydrodyn., 1988, vol. 10, pp. 195–213.
2. M. Torabi Rad and C. Beckermann: Materialia, 2019, vol. 7, p. 100364.10.1016/j.mtla.2019.100364 ↗
3. J. Ni and C. Beckermann: Metall. Trans. B, 1991, vol. 22B, pp. 349–61.10.1007/BF02651234 ↗
4. C.Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2754–64.10.1007/BF02652369 ↗
5. C.Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2765–83.10.1007/BF02652370 ↗
6. C. Beckermann and C.Y. Wang: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2784–95.10.1007/BF02652371 ↗
7. M. Založnik and H. Combeau: Comput. Mater. Sci., 2010, vol. 48, pp. 1–10.10.1016/j.commatsci.2009.04.036 ↗
8. M. Založnik, A. Kumar, and H. Combeau: Comput. Mater. Sci., 2010, vol. 48, pp. 11–21.10.1016/j.commatsci.2009.10.013 ↗
9. L. Heyvaert, M. Bedel, M. Založnik, and H. Combeau: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4713–34.10.1007/s11661-017-4238-z ↗
10. M. Wu and A. Ludwig: Acta Mater., 2009, vol. 57, pp. 5621–31.10.1016/j.actamat.2009.07.056 ↗
11. M. Wu and A. Ludwig: Acta Mater., 2009, vol. 57, pp. 5632–44.10.1016/j.actamat.2009.07.067 ↗
12. M. Martorano, C. Beckermann, and C.-A. Gandin: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1657–74.10.1007/s11661-003-0311-x ↗
13. M. Wu, A. Fjeld, and A. Ludwig: Comput. Mater. Sci., 2010, vol. 50, pp. 32–42.10.1016/j.commatsci.2010.07.005 ↗
14. M. Wu, A. Ludwig, and A. Fjeld: Comput. Mater. Sci., 2010, vol. 50, pp. 43–58.10.1016/j.commatsci.2010.07.006 ↗
15. X.D. Wang and Y. Fautrelle: Int. J. Heat Mass Transf., 2009, vol. 52, pp. 5624–33.10.1016/j.ijheatmasstransfer.2009.05.030 ↗
16. G. Quillet, A. Ciobanas, P. Lehmann, and Y. Fautrelle: Int. J. Heat Mass Transf., 2007, vol. 50, pp. 654–66.10.1016/j.ijheatmasstransfer.2006.07.030 ↗
17. L. Hachani, B. Saadi, X.D. Wang, A. Nouri, K. Zaidat, A. Belgacem-Bouzida, L. Ayouni-Derouiche, G. Raimondi, and Y. Fautrelle: Int. J. Heat Mass Transf., 2012, vol. 55, pp. 1986–96.10.1016/j.ijheatmasstransfer.2011.11.054 ↗
18. L. Hachani, K. Zaidat, B. Saadi, X.D. Wang, and Y. Fautrelle: Int. J. Therm. Sci., 2015, vol. 91, pp. 34–48.10.1016/j.ijthermalsci.2015.01.007 ↗
19. L. Hachani, K. Zaidat, and Y. Fautrelle: Int J. Heat Mass Transf., 2015, vol. 85, pp. 438–454.10.1016/j.ijheatmasstransfer.2015.01.145 ↗
20. S. Ganesan and D.R. Poirier: Metall. Trans. A, 1987, vol. 18A, pp. 721–23.10.1007/BF02649490 ↗
21. H. Soltani, F. Ngomesse, G. Reinhart, M.C. Benoudia, M. Zahzouh, and H. Nguyen-Thi: J. Alloys Compd., 2021, vol. 862, p. 158028.10.1016/j.jallcom.2020.158028 ↗
22. H. Yasuda, Y. Yamamoto, N. Nakatsuka, M. Yoshiya, T. Nagira, A. Sugiyama, I. Ohnaka, K. Uesugi, and K. Umetani: Int. J. Cast Met. Res., 2009, vol. 22, pp. 15–21.10.1179/136404609X368118 ↗
23. R.S. Rerko, H.C. de Groh III, and C. Beckermann: Mater. Sci. Eng. A, 2003, vol. 347, pp. 186–97.10.1016/S0921-5093(02)00592-0 ↗
24. G. Zimmermann, C. Pickmann, M. Hamacher, E. Schaberger-Zimmermann, H. Neumann-Heyme, K. Eckert, and S. Eckert: Acta Mater., 2017, vol. 126, pp. 236–50.10.1016/j.actamat.2016.12.063 ↗
25. M.H. Burden, D.J. Hebditch, and J.D. Hunt: J. Cryst. Growth, 1973, vol. 20, pp. 121–24.10.1016/0022-0248(73)90125-5 ↗
26. G. Reinhart, C.-A. Gandin, N. Mangelinck-Noél, H. Nguyen-Thi, J.-E. Spinelli, J. Baruchel, and B. Billia: Acta. Mater., 2013, vol. 61, pp. 4765–77.10.1016/j.actamat.2013.04.067 ↗
27. H. Nguyen-Thi, G. Reinhart, G. Salloum Abou Jaoude, R.H. Mathiesen, G. Zimmermann, Y. Houltz, D. Voss, A. Verga, D.J. Browne, and A.G. Murphy: J. Cryst. Growth, 2013, vol. 374, pp. 23–30.10.1016/j.jcrysgro.2013.03.032 ↗
28. A.G. Murphy, R.H. Mathiesen, Y. Houltz, J. Li, C. Lockowandt, K. Henriksson, N. Melville, and D.J. Browne: J. Cryst. Growth, 2016, vol. 454, pp. 96–104.10.1016/j.jcrysgro.2016.08.054 ↗
29. F. Ngomesse, G. Reinhart, H. Soltani, G. Zimmermann, D.J. Browne, W. Sillekens, and H. Nguyen-Thi: Acta Mater., 2021, vol. 221, p. 117401.10.1016/j.actamat.2021.117401 ↗
30. D.R. Liu, N. Mangelinck-Noël, C.-A. Gandin, G. Zimmermann, L. Sturz, H. Nguyen-Thi, and B. Billia: Acta Mater., 2014, vol. 64, pp. 253–65.10.1016/j.actamat.2013.10.038 ↗
31. Y.Z. Li, N. Mangelinck-Noël, G. Zimmermann, L. Sturz, and H. Nguyen-Thi: J. Cryst. Growth, 2019, vol. 513, pp. 20–29.10.1016/j.jcrysgro.2019.02.050 ↗
32. R.A. Spivey, S. Gilley, A. Ostrogorsky, R. Grugel, G. Smith, and P. Luz: AIAA Pap., 2003, vol. 1362, pp. 1–10.
33. M. Bedel, K.O. Tveito, M. Zaloznik, H. Combeau, and M. M’Hamdi: Comput. Mater. Sci., 2015, vol. 102, pp. 95–109.10.1016/j.commatsci.2015.01.028 ↗
34. N. Saunders, Z. Guo, X. Li, A.P. Miodownik, and J.-P. Schillé: JOM, 2003, vol. 55, pp. 61–65.10.1007/s11837-003-0013-2 ↗
35. J.A. Dantzig and M. Rappaz: Solidification, 1st ed. EPFL Press, Lausanne, 2009.10.1201/9781439808030 ↗
36. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, vol. 9, pp. 671–75.10.1038/nmeth.2089 ↗
37. T.J. Williams: PhD Thesis, The University of Iowa (2022)
38. MAGMAsoft, MAGMA Gmbh, Kackerstrasse 16–18, 52072 Aachen, Germany
39. OpenFOAM v9 user guide. (The OpenFOAM Foundation, 2022), https://cfd.direct/openfoam/user-guide. Accessed 14 June 2022