Design of Online Spheroidization Process for 1.0C-1.5Cr Bearing Steel and Microstructure Analysis
Source abstract
Abstract
Using thermo-mechanical control process, the online spheroidization annealing process of 1.0C-1.5Cr bearing steel was designed. Apart from intercritical online spheroidization (IS), a novel subcritical online spheroidization (SS) process was proposed, which is characterized by water-cooling to around 773 K (500 °C) after the final rolling pass, and then directly reheating to 973 K (700 °C) for isothermal holding. Compared with the results from the traditional offline spheroidization (TS) process, the size of spheroidized carbides is similar in both the TS and IS processes, whereas it is much smaller in the SS process. After spheroidization annealing, microstructure evolution during austenitization and quenching treatment was examined. It is shown that the refining of spheroidized carbides accelerates the dissolution of carbides during the austenitizing process, and decreases the size of undissolved carbides. In addition, the SS process can obtain finer prior austenite grain after quenching, which contributes to the enhancement of final hardness.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. H.K.D.H. Bhadeshia: Prog. Mater. Sci., 2012, vol. 57, pp. 268-435.10.1016/j.pmatsci.2011.06.002 ↗
2. E.V. Zaretsky: Mater. Sci. Technol., 2012, vol. 28, pp. 58-69.10.1179/1743284711Y.0000000043 ↗
3. T. Oyama and O.D. Sherby, J. Wadsworth, B. Walser: Scr. Metall., 1984, vol. 18, pp. 799-804.10.1016/0036-9748(84)90397-1 ↗
4. J.D. Verhoeven: Metall. Mater. Trans. A, 2000, vol. 31, pp. 2431-38.10.1007/s11661-000-0188-x ↗
5. J.J. Sun, F.L. Lian, H.J. Liu, T. Jiang, S.W. Guo, L.X. Du and Y.N. Liu: Mater. Charact., 2014, vol. 95, pp. 291-98.10.1016/j.matchar.2014.07.011 ↗
6. J.D. Verhoeven and E.D. Gibson: Metall. Mater. Trans. A, 1998, vol. 29, pp. 1181-89.10.1007/s11661-998-0245-4 ↗
7. A.S. Pandit and H.K.D.H. Bhadeshia: Proc. R. Soc. A, 2012, vol. 468, pp. 2767-78.10.1098/rspa.2012.0115 ↗
8. Z.X. Li, C.S. Li, J. Zhang, B. Qiao and Z.Z. Li: Metall. Mater. Trans. A, 2015, vol. 46, pp. 3220-31.10.1007/s11661-015-2904-6 ↗
9. N.V. Luzginova, L. Zhao and J. Sietsma: Metall. Mater. Trans. A, 2008, vol. 39, pp. 513-21.10.1007/s11661-007-9403-3 ↗
10. J. Epp, H. Surm, O. Kessler and T. Hirsch: Metall. Mater. Trans. A, 2007, vol. 38, pp. 2371-78.10.1007/s11661-007-9314-3 ↗
11. S.E. Nam and D.N. Lee: J. Mater. Sci., 1987, vol. 22, pp. 2319-26.10.1007/BF01082110 ↗
12. S.L. Zhang, X.J. Sun and H. Dong: Mater. Sci. Eng. A, 2006, vol. 432, pp. 324-32.10.1016/j.msea.2006.06.057 ↗
13. H. Hwang and B.C. De Cooman: Steel Res. Int., 2016, vol. 87, pp. 112-25.10.1002/srin.201400591 ↗
14. Z.X. Li, C.S. Li, J. Zhang, B.Z. Li and X.D. Pang: Metall. Mater. Trans. A, 2016, vol. 47, pp. 3607-21.10.1007/s11661-016-3425-7 ↗
15. Y.K. Sun and D. Wu: J Iron Steel Res. Int., 2009, vol. 16, pp. 61-65.10.1016/S1006-706X(10)60012-X ↗
16. Z.X. Li, C.S. Li, B.Z. Li, Y.Q. Ma and T. Li: Mater. Sci. Technol., 2015, vol. 31, pp. 722-29.10.1179/1743284714Y.0000000657 ↗
17. M. Wang, F. Zhang and Z. Yang: Mater. Des., 2017, vol. 114, pp. 102-10.10.1016/j.matdes.2016.10.049 ↗
18. E.B. Hawbolt, B. Chau and J.K. Brimacombe: Metall. Trans. A, 1983, vol. 14, pp. 1803-15.10.1007/BF02645550 ↗
19. S.W. Seo, H.K.D.H. Bhadeshia and D.W. Suh: Mater. Sci. Technol., 2015, vol. 31, pp. 487-93.10.1179/1743284714Y.0000000641 ↗
20. Z.X. Li, C.S. Li, J.Y. Ren, B.Z. Li, J. Zhang and Y.Q. Ma: Mater. Sci. Eng. A, 2016, vol. 674, pp. 262-69.10.1016/j.msea.2016.07.105 ↗
21. W. Solano-Alvarez and H.K.D.H. Bhadeshia: Metall. Mater. Trans. A, 2014, vol. 45, pp. 4916-31.10.1007/s11661-014-2431-x ↗
22. A.T.W. Barrow and P.E.J. Rivera-Díaz-del-Castillo: Acta Mater., 2011, vol. 59, pp. 7155-67.10.1016/j.actamat.2011.08.007 ↗
23. H. Yahyaoui, H. Sidhom, C. Braham and A. Baczmanski, Mater. Des., 2014, vol.55, pp. 888-897.10.1016/j.matdes.2013.10.062 ↗
24. W. Song, P.P. Choi, G. Inden, U. Prahl, D. Raabe and W. Bleck: Metall. Mater. Trans. A, 2014, vol. 45, pp. 595-606.10.1007/s11661-013-2048-5 ↗
25. Y.T. Wang, Y. Adachi, K. Nakajima and Y. Sugimoto: Acta Mater., 2010, vol. 58, pp. 4849-58.10.1016/j.actamat.2010.05.023 ↗
26. A.M. Elwazri, P. Wanjara and S. Yue: Metall. Mater. Trans. A, 2005, vol. 36, pp. 2297-305.10.1007/s11661-005-0102-7 ↗
27. K.M. Wu and H.K.D.H. Bhadeshia: Scr. Mater., 2012, vol. 67, pp. 53-56.10.1016/j.scriptamat.2012.03.019 ↗
28. F.G. Caballero, C. García de Andrés and C. Capdevila: Mater. Charact., 2000, vol. 45, pp. 111-16.10.1016/S1044-5803(00)00056-5 ↗
29. A.M. Elwazri, P. Wanjara and S. Yue: Mater. Charact., 2005, vol. 54, pp. 473-78.10.1016/j.matchar.2005.02.002 ↗
30. Ö.E. Atasoy and S. Özbilen: J. Mater. Sci., 1989, vol. 24, pp. 281-87.10.1007/BF00660968 ↗
31. G.H. Zhang, J.Y. Chae, K.H. Kim and D.W. Suh: Mater. Charact., 2013, vol. 81, pp. 56-67.10.1016/j.matchar.2013.04.007 ↗
32. C.A. Stickels: Metall. Trans., 1974, vol. 5, pp. 865-74.10.1007/BF02643140 ↗
33. K.H. Kim, S.D. Park and J.H. Kim: Met. Mater. Int., 2012, vol. 18, pp. 917-21.10.1007/s12540-012-7002-3 ↗
34. A.T.W. Barrow, J.H. Kang and P.E.J. Rivera-Diaz-del-Castillo: Acta Mater., 2012, vol. 60, pp. 2805-15.10.1016/j.actamat.2012.01.046 ↗
35. J. Zhao, T. Zhao, C.S. Hou, F.C. Zhang and T.S. Wang: Mater. Des., 2015, vol. 86, pp. 215-20.10.1016/j.matdes.2015.07.055 ↗
36. K.S. Park, S.J. Cho, K.Y. Lee, G.S. Kim and C.S. Lee: Int. J. Fatigue, 2007, vol.29, pp. 1863-67.10.1016/j.ijfatigue.2007.01.001 ↗
37. E.C. Santos, K. Kida, T. Honda, H. Koike and J. Rozwadowska: Mater. Sci. 2012, vol. 47, pp. 677-84.10.1007/s11003-012-9443-8 ↗
38. P.R. Howell: Mater. Charact., 40 (1998) 227-60.10.1016/S1044-5803(98)00024-2 ↗
39. M. Bambacha and S. Seuren, J. Mater. Process. Tech., 2015, vol. 216, pp. 95-113.10.1016/j.jmatprotec.2014.07.018 ↗
40. A. Fernández-Vicente, M. Carsí, F. Penãlba, E. Taleff and O.A. Ruano: Mater. Sci. Eng. A, 2002, vol. 335, pp. 175-85.10.1016/S0921-5093(01)01916-5 ↗
41. Q. Lai, M. Gouné, A. Perlade, T. Pardoen, P. Jacques, O. Bouaziz and Y. Bréchet: Metall. Mater. Trans. A, 2016, vol. 47, pp. 3375-86.10.1007/s11661-016-3547-y ↗
42. J.Y. Chae, J.H. Jang, G. Zhang, K.H. Kim, J.S. Lee, H.K.D.H. Bhadeshia and D.W. Suh, Scr. Mater., 2011, vol. 65, pp. 245-48.10.1016/j.scriptamat.2011.04.018 ↗
43. G. Miyamoto, H. Usuki, Z.D. Li and T. Furuhara, Acta Mater., 2010, vol. 58, pp. 4492-502.10.1016/j.actamat.2010.04.045 ↗