Densification and structural change of mechanically alloyed W-Cu composites
Source abstract
Abstract
Fine-grained, high-density (97+ pct of theoretical density (TD)), 80W-20Cu wt pct (58W-42Cu at. pct) composites have been prepared using nonconventional alloying techniques. The W and Cu precursor powders were combined by a high-energy ball-milling procedure in air or hexane. The mechanically alloyed W+Cu powder mixtures were then cold pressed into green compacts and sintered at 1523 K. The milling medium and milling time were varied to increase product densities with a concomitant order-of-magnitude decrease in grain size. For densification, air was found to be a more effective medium than hexane. From microhardness measurements, it was concluded that the W-Cu alloys were dispersion and solution hardened, but were sensitive to entrapped residual impurities. X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and scanning electron micros-copy (SEM) analyses were used to demonstrate that the as-milled and sintered W-Cu alloy structures were metastable, decomposing into the starting W and Cu components upon heating at or above 723 K.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Metal Alloys Wear and Properties · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. A. Bose and R.M. German: Sintering Theory and Practice, John Wiley & Sons, Inc., New York, NY, 1996.
2. R.M. German, K.F. Hens, J.L. Johnson, and Y. Bin: Advances in Powder Metallurgy and Particulate Materials. Specialty Materials and Composites. Proc. 1993 Int. Conf. on Powder Metallurgy and Particulate Materials, MPIF Press, Princeton, NJ, 1993, pp. 189–202.
3. J. Boscary, S. Suzuki, K. Nakamura, T. Suzuki, and M. Akiba: Fusion Engineering and Design. Proc. 1997 4th Int. Symp. on Fusion Nuclear Technology, Elsevier, Lausanne, Switzerland, 1999, vols. 39–40, Part A, pp. 537–42.
4. Binary Alloy Phase Diagrams, 2d ed., T.B. Massalski, H. Okamoto, PR. Subramanian, and L. Kacprzak, eds., William W. Scott Publishers, New York, NY, 1990, pp. 1503–04.
5. G.G. Lee, G.H. Ha, D.W. Lee, B.K. Kim, and I.S. Ahn: TMS Annual Meeting Chemistry and Physics of Nanostructures and Related Non-Equilibrium Materials. Proc. 1997 TMS Annual Meeting, TMS, War-rendale, PA, 1997, pp. 163–70.
6. H.J. Ryu, S.H. Hong, J.W. Noh, and W.H. Baek: 2nd Int. Symp. on Advanced PM Processing (ISAPM-2), Pohang, Korea, 1996, pp. 196–203.
7. M.L. Ovecoglu, B. Ozkal, and C. Suryanarayana: J. Mater. Res., 1996, vol. 11 (7), pp. 1673–82.10.1557/JMR.1996.0210 ↗
8. J.C. Kim and I.H. Moon: Nanostr. Mater., 1998, vol. 10 (2), pp. 283–90.10.1016/S0965-9773(98)00065-8 ↗
9. A. Upadhyaya and R.M. German: Int. J. Powder Metall, 1998, vol. 34 (2), pp. 43–55.
10. B.D. Cullity: Elements of X-ray Diffraction, 2nd ed., Addison-Wesley Publishing Company, Inc., Reading, MA, 1978, pp. 359–360.
11. E. Gaffet, C. Louison, M. Harmelin, and F. Faudot: Mater. Sci. Eng., 1991, vol. A134, pp. 1380–84.10.1016/0921-5093(91)90995-Y ↗
12. J. Cornejo, V. Martinez, and S. Ordonez: Key Engineering Materials, 2nd Int. Latin-American Conf. on Powder Technology, Foz do Iguacu, Brazil, 2001, vols. 189–191, pp. 561–66.
13. D.R. Askeland: The Science and Engineering of Materials, 2nd ed., PWS-Kent Publishing Company, Boston, MA, 1989, p. 686.