In-situ measurement of continuous cooling β → α transformation behavior of CP-Ti
Source abstract
Abstract
The β → α transformation kinetics of CP-Ti during continuous cooling was measured using a fully computer-controlled resistivity-temperature real-time measurement apparatus. Unlike the pure Ti case, the massive transformation occurs at medium cooling rates, about 90 °C/s to 600 °C/s. Its start temperature is estimated to be about 890 °C, which is close to the T0 temperature. The reason for the appearance of massive transformation in CP-Ti is because CP-Ti contains a significant amount of Fe as an impurity, which leads to the T0(β → α) vs composition curve being parallel to the composition axis due to its retrograde solubility. The martensitic transformation starts to occur at a cooling rate of about 500 °C/s, which is much slower than that (about 3000 °C/s) reported in a pure Ti case. This retardation effect of martensitic transformation is also believed to arise from the presence of Fe in CP-Ti, which is a strong β stabilizer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. L.P. Srivastava and J. Gordon Parr: Trans. AIME, 1962, vol. 224, pp. 1295–97.
2. K.S. Jepson, A.R.G. Brown, and J.A. Gray: in The Science, Technology and Application of Titanium, R.I. Jaffe and M. Promisel, eds., Pergamon Press, London, 1970, pp. 677–90.10.1016/B978-0-08-006564-9.50074-9 ↗
3. M. Cromier and F. Claisse: J. Less-Common Met., 1974, vol. 34, pp. 181–89.10.1016/0022-5088(74)90158-1 ↗
4. M.R. Plichta, J.C. Williams, and H.I. Aaronson: Metall. Trans. A, 1977, vol. 8A, pp. 1885–92.10.1007/BF02646561 ↗
5. M.R. Plichta, H.I. Aaronson, and J.H. Perepezko: Acta Metall., 1978, vol. 26, pp. 1293–1305.10.1016/0001-6160(78)90014-7 ↗
6. M.R. Plichta, W.A.T. Clark, and H.I. Aaronson: Metall. Trans. A, 1984, vol. 15A, pp. 427–35.10.1007/BF02644966 ↗
7. J.S. Kim, J.K. Park, C.H. Chun, and G.H. Kim: Phil. Mag. A, 2001, vol. 81, pp. 2095–107.10.1080/01418610010029557 ↗
8. C.Y. Lee and J.K. Park: Phil. Mag. A, 2001, vol. 81, pp. 2415–26.10.1080/01418610110038448 ↗
9. Metals Handbook, 9th ed., ASM, Metals Park, OH, 1985, vol. 2, pp. 814–16.
10. Material Properties Handbook: Titanium Alloys, R.R. Boyer, G. Welsch, and E.W. Collins, eds., ASM, Metals Park, OH, 1994, pp. 165–80.
11. T. Ahmed and H.J. Rack: Mater. Sci. Eng. A, 1998, vol. A243, pp. 206–11.10.1016/S0921-5093(97)00802-2 ↗
12. J.C. Williams: Titanium Science and Technology, Proc. 2nd Int. Conf., R.I. Jaffe and H.M. Burte, eds., AIME, MIT, Cambridge, MA, 1972, pp. 1433–94.
13. John W. Elmer, Hoe Wong, and Thorsten Ressler: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2761–73.10.1007/s11661-998-0317-5 ↗