journal article·2003-09

The role of nitrogen on the deformation response of hadfield steel single crystals

D. Canadinc, H. Sehitoglu, I. Karaman, Y. I. Chumlyakov, H. J. Maier

Publisher page

Abstract

We studied the role of nitrogen content on the stress-strain response of Hadfield steel (HS) single crystals under compressive loading. Two different nitrogen concentrations were examined for each orientation (0.05 wt pct and 1.06 wt pct) with drastic increase in critical resolved shear stresses (CRSSs) and strain-hardening coefficients compared to HS without nitrogen. The stress-strain response was strongly dependent on both the crystallographic orientation and the nitrogen concentration. Transmission electron microscopy (TEM) results revealed that, for the HS with 1.06 wt pct nitrogen, the hardening is influenced by the coexisting deformation twins and precipitates, which both act as strong obstacles against dislocation motion. A visco-plastic self-consistent (VPSC) model was modified to account for precipitation and twinning length scales in HS with 1.06 wt pct nitrogen for selected crystallographic orientations. Incoherent precipitates in the hardening formulation were treated as factors affecting the mean free path of dislocations. The model also accounts for plastic relaxation of precipitates with increasing strain and accurately predicts the stress-strain response.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. J.W. Simmons: Ph.D. Dissertation, Oregon Graduate Institute of Science and Technology, Portland, Oregon 1993.
2. I. Karaman, H. Sehitoglu, H.J. Maier, and Y.I. Chumlyakov: Acta Mater., 2001, vol. 49, p. 3919.10.1016/S1359-6454(01)00296-8 ↗
3. K.J., Irvine, D.T. Llewellyn, and F.B. Pickering: J. Iron Steel Inst., 1961, vol. 199, p. 153.
4. M.L.G. Byrnes, M. Grujicic, and W.S. Owen: Acta Metall., 1987, vol. 35, p. 1853.10.1016/0001-6160(87)90131-3 ↗
5. R.P. Reed: JOM, 1989, vol. 41, p. 16.10.1007/BF03220991 ↗
6. Y.I. Chumlyakov, A.D. Korotaev: Russ. Phys. J., 1992, vol. 35 (9), p. 783.10.1007/BF00560052 ↗
7. Y.I. Chumlyakov and I.V. Kireeva, and O.V. Ivanova: Thr. Phys. Met. Metallogr., 1994, vol. 78 (3), p. 350.
8. Y.I. Chumlyakov, I.V. Kireeva, A.D. Korotaev, E.I. Litvinova, and Y.L. Zuev: Russ. Phys. J., 1996, vol. 39 (3), p. 189.10.1007/BF02067642 ↗
9. Y.I. Chumlyakov, I.V. Kireeva, H. Sehitoglu, E.I. Litvinova, E.G. Zaharova, and N.V. Luzginova: 5th Int. Conf. on High Nitrogen Steels, Espoo, Finland, and Stockolm, Sweden, May 24–29, 1998.
10. I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, H.J. Maier, and I.V. Kireeva: Scripta Mater., 2001, vol. 44, p. 337.10.1016/S1359-6462(00)00600-X ↗
11. I. Karaman, H. Sehitoglu, K. Gall, Y.I. Chumlyakov, and H.J. Maier: Acta Mater., 2000, vol. 48, p. 1345.10.1016/S1359-6454(99)00383-3 ↗
12. V.G. Gavriljuk and H. Berns: High Nitrogen Steels, Springer-Verlag, Berlin, 1999.10.1007/978-3-662-03760-7 ↗
13. R.A. Lebensohn and C.N. Tomé: Mater. Sci. Eng. A, 1994, vol. 175, p. 71.10.1016/0921-5093(94)91047-2 ↗
14. A. Staroselsky and L. Anand: J. Mech. Phys. Solids, 1998, vol. 46, p. 671.10.1016/S0022-5096(97)00071-9 ↗
15. S.R. Kalindindi: Int. J. Plasticity, 1998b, vol. 14, p. 1265.10.1016/S0749-6419(98)00054-0 ↗
16. I. Karaman, H. Sehitoglu, A.J. Beaudoin, Y.I. Chumlyakov, H.J. Maier, and C.N. Tome: Acta Mater., 2000, vol. 48, p. 2031.10.1016/S1359-6454(00)00051-3 ↗
17. I. Karaman, H. Sehitoglu, Y.I. Chumlyakov, H.J. Maier, and I.V. Kireeva: Metall. Mater. Trans. A, 2001, vol. 32A, p. 695.10.1007/s11661-001-0086-x ↗
18. S.H. Choi and F. Barlat: Scripta Mater., 1999, vol. 41, p. 981.10.1016/S1359-6462(99)00241-9 ↗
19. W.F. Hosford and R.H. Zeisloft: Metall. Trans., 1972, vol. 3, pp. 113–21.10.1007/BF02680590 ↗
20. P. Bate, W.T. Roberts, and D.V. Wilson: Acta Metall. Mater., 1981, vol. 29, p. 1797.10.1016/0001-6160(81)90106-1 ↗
21. F. Barlat and J. Liu: Mater. Sci. Eng. A, 1998, vol. A257, p. 47.10.1016/S0921-5093(98)00823-5 ↗
22. M.H. Lyttle and J.A. Wert: Metall. Mater. Trans. A, 1999, vol. 30, pp. 1283–88.10.1007/s11661-999-0277-4 ↗
23. L.M. Brown and G.R. Woolhous: Phil. Mag. A, 1970, vol. 21, p. 329.10.1080/14786437008238420 ↗
24. L.M. Brown and W.M. Stobbs: Phil. Mag., 1971a, vol. 23, p. 1185.10.1080/14786437108217405 ↗
25. L.M. Brown and W.M. Stobbs: Phil. Mag., 1971b, vol. 23, p. 1201.10.1080/14786437108217406 ↗
26. R. Lebensohn and C.N. Tomé: Acta Metall Mater., 1993, vol. 41, p. 2611.10.1016/0956-7151(93)90130-K ↗
27. Y. Estrin and H. Mecking: Acta Metall., 1984, vol. 32, p. 57.10.1016/0001-6160(84)90202-5 ↗
28. A. Acharya and A.J. Beaudoin: J. Mech. Phys. Solids, 2000, vol. 48, p. 2213.10.1016/S0022-5096(00)00013-2 ↗
29. E. El-Danaf, S.R. Kalidindi, and R.D. Doherty: Metall. Mater. Trans. A., 1999, vol. 30A, p. 1223.10.1007/s11661-999-0272-9 ↗
30. U.F. Kocks, A.S. Argon, and M.F. Ashby: Progr. Mater. Sci., 1975, vol. 19, p. 1.10.1016/0079-6425(75)90005-5 ↗
31. L. Remy: Acta Metall., 1978, vol. 26, p. 443.10.1016/0001-6160(78)90170-0 ↗
32. U.F. Kocks, C.N. Tomé, and R.H. Wenk: Texture and Anisotropy, Cambridge University Press, Cambridge, United Kingdom, 1998.
33. C.N. Tomé, R.A. Lebensohn, and U.F. Kocks: Acta Metall. Mater., 1991, vol. 39, p. 2667.10.1016/0956-7151(91)90083-D ↗
34. T. Mura: Micromechanics of Defects in Solids, Kluwer Academic Pub., Dordrecht, The Netherlands, 1993.
35. E. Nembach: Particle Strengthening of Metals and Alloys, John Wiley & Sons, Inc., New York, NY, 1997.
36. M.F. Ashby: Phil. Mag., 1970, vol. 14, p. 1157.10.1080/14786436608224282 ↗
37. F.R.N. Nabarro, Z.S. Basinski, and D.B. Holt: Adv. Phys., 1964, vol. 13, p. 193.10.1080/00018736400101031 ↗
38. L.M. Brown and D.R. Clarke: Acta Metall., 1975, vol. 23, p. 821.10.1016/0001-6160(75)90198-4 ↗
39. H. Ino, K. Oda, and K. Umezu: J. Jpn. Inst. Met., 1989, vol. 53, p. 372.10.2320/jinstmet1952.53.4_372 ↗
40. N. Narita and J. Takamura: in Dislocations in Solids, dF.R.N. Nabarro, ed., North Holland Publication Co., Amsterdam, Netherlands, 1992, vol. 9, p. 135.
41. R.L. Fleischer: Acta Metall., 1963, vol. 11, p. 203.10.1016/0001-6160(63)90213-X ↗