Effect of composition and austenite deformation on the transformation characteristics of low-carbon and ultralow-carbon microalloyed steels
Source abstract
Abstract
Deformation dilatometry has been used to simulate controlled hot rolling followed by controlled cooling of a group of low- and ultralow-carbon microalloyed steels containing additions of boron and/or molybdenum to enhance hardenability. Each alloy was subjected to simulated recrystallization and nonrecrystallization rolling schedules, followed by controlled cooling at rates from 0.1 °C/s to about 100 °C/s, and the corresponding continuous-cooling-transformation (CCT) diagrams were constructed. The resultant microstructures ranged from polygonal ferrite (PF) for combinations of slow cooling rates and low alloying element contents, through to bainitic ferrite accompanied by martensite for fast cooling rates and high concentrations of alloying elements. Combined additions of boron and molybdenum were found to be most effective in increasing steel hardenability, while boron was significantly more effective than molybdenum as a single addition, especially at the ultralow carbon content. Severe plastic deformation of the parent austenite (>0.45) markedly enhanced PF formation in those steels in which this microstructural constituent was formed, indicating a significant effective decrease in their hardenability. In contrast, in those steels in which only nonequilibrium ferrite microstructures were formed, the decreases in hardenability were relatively small, reflecting the lack of sensitivity to strain in the austenite of those microstructural constituents forming in the absence of PF.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. G.I. Garcia: Proc. Int. Conf. Microalloying ’95, The Iron and Steel Society, Warrendale, PA, 1995, pp. 365–75.
2. B.A. Graville: Proc. Int. Conf. Welding of HSLA Structure Steels, ASM, Metals Park, OH, 1978, pp. 85–101.
3. T. Araki: Proc. Int. Conf. HSLA Steels ’85, J.M. Gray et al., eds., ASM INTERNATIONAL, Metals Park, OH, 1986, pp. 259–71.
4. I. Tamura, H. Sekine, T. Tanaka, and C. Ouchi: Thermomechanical Processing of High-Strength Low-Alloy Steels, Butterworth and Company, London, 1988, pp. 1–248.
5. Y.E. Smith, A.P. Coldren, and R.L. Cryderman: Toward Improved Ductility and Toughness, Iron and Steel Institute of Japan, Tokyo, 1971, pp. 119–42.
6. B.P. Wynne, P. Cizek, C.H.J. Davies, B.C. Muddle, and P.D. Hodgson: Proc. Int. Conf. THERMEC ’97, T. Chandra and T. Sakai, eds., TMS, Warrendale, PA, 1997, vol. 1, pp. 837–43.
7. Atlas for Bainitic Microstructures—Vol. 1, Continuous-Cooled Zw Microstructures of Low-Carbon Steels, T. Araki et al., eds., Iron and Steel Institute of Japan, Tokyo, 1992, pp. 4–5.
8. B.L. Bramfitt and J.G. Speer: Metall. Trans. A, 1990, vol. 21A, pp. 817–29.10.1007/BF02656565 ↗
9. G. Krauss and S.W. Thompson: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 937–45.10.2355/isijinternational.35.937 ↗
10. H.K.D.H. Bhadeshia: Bainite in Steels, Transformations, Microstructure and Properties, The Institute of Materials, London, 1992, pp. 245–82.
11. Y. Ohmori, H. Ohtani, and T. Kunitake: Trans. Iron Steel Inst. Jpn., 1971, vol. 11, pp. 250–59.10.2355/isijinternational1966.11.250 ↗
12. J.R. Yang, C.Y. Huang, and S.C. Wang: Proc. Int. Symp. Low-Carbon Steels for the 90’s, R. Asfahani and G. Tither, eds., TMS, Warrendale, PA, 1993, pp. 293–301.
13. J.R. Yang, C.Y. Huang, and C.S. Chiou: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 1013–19.10.2355/isijinternational.35.1013 ↗
14. S. Yamamoto, H. Yokoyama, K. Yamada, and M. Niikura: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 1020–26.10.2355/isijinternational.35.1020 ↗
15. P.A. Manohar, T. Chandra, and C.R. Killmore: Iron Steel Inst. Jpn. Int., 1996, vol. 36, pp. 1486–93.10.2355/isijinternational.36.1486 ↗
16. H. Tamehiro, M. Murata, and R. Habu: Proc. Int. Conf. HSLA Steels ’85, J.M. Gray et al., eds., ASM INTERNATIONAL, 1986, pp. 325–33.
17. G. Spanos, H.S. Fang, and H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1381–90.10.1007/BF02672558 ↗
18. Ph. Maitrepierre, J. Rofes-Vernis, and D. Thivellier: Proc. Int. Symp. Boron in Steels, S.K. Banerji and J.E. Morral, eds., TMS-AIME, Warrendale, PA, 1980, pp. 1–18.
19. J.S. Kirkaldy, B.A. Thomson, and E.A. Baganis: in Hardenability Concepts with Applications to Steel, D.V. Doane and J.S. Kirkaldy, eds., TMS-AIME, Warrendale, PA, 1978, pp. 82–125.
20. J.E. Morral and T.B. Cameron: Pron. Int. Symp. Boron in Steels, S.K. Banerji and J.E. Morral, eds., TMS-AIME, Warrendale, PA, 1980, pp. 19–32.
21. M. Enomoto, C.L. White, and H.I. Aaronson: Metall. Trans. A, 1988, vol. 19A, pp. 1807–18.10.1007/BF02645149 ↗
22. R.C. Sharma and G.R. Purdy: Metall. Trans., 1974, vol. 5, pp. 939–47.10.1007/BF02643152 ↗
23. M. Enomoto, N. Nojiri, and Y. Sato: Mater. Trans. JIM, 1994, vol. 35, pp. 859–67.10.2320/matertrans1989.35.859 ↗
24. M. Enomoto and H.I. Aaronson: Metall. Trans. A, 1986, vol. 17A, pp. 1385–97.10.1007/BF02650120 ↗
25. W.T. Reynolds, Jr., F.Z. Li, C.K. Shui, and H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1433–63.10.1007/BF02672561 ↗
26. J.K. Chen, R.A. Vandermeer, and W.T. Reynolds, Jr.: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1267–79.
27. H.I. Aaronson: Metall. Trans. A, 1993, vol. 24A, pp. 241–76.10.1007/BF02657313 ↗
28. W.T. Reynolds, Jr., H.I. Aaronson, and G. Spanos: Mater. Trans. JIM, 1991, vol. 32, pp. 737–46.10.2320/matertrans1989.32.737 ↗
29. Y. Ohmori and T. Maki: Mater. Trans. JIM, 1991, vol. 32, pp. 631–41.10.2320/matertrans1989.32.631 ↗
30. H.K.D.H. Bhadeshia and J.W. Christian: Metall. Trans. A, 1990, vol. 21A, pp. 767–97.10.1007/BF02656561 ↗
31. G.R. Speich, L.J. Cuddy, C.R. Gordon, and A.J. DeArdo: in Phase Transformations in Ferrous Alloys, A.R. Marder and J.I. Goldstein, eds., TMS-AIME, Warrendale, PA, 1983, pp. 341–89.
32. E. Essadiqi and J.J. Jonas: Metall. Trans. A, 1988, vol. 19A, pp. 417–26.10.1007/BF02649255 ↗
33. I. Tamura, H. Sekine, T. Tanaka, and C. Ouchi: Thermomechanical Processing of High-Strength Low-Alloy Steels, Butterworth and Co., London, 1988, pp. 86–93.
34. P. Cizek, B.P. Wynne, B.C. Muddle, and P.D. Hodgson: Proc. Int. of Conf. THERMEC ’97, T. Chandra and T. Sakai, eds., TMS, Warrendale, PA, 1997, vol. 1, pp. 709–15.
35. H. Inagaki: Trans. Iron Steel Inst. Jpn., 1983 vol. 23, pp. 1059–67.10.2355/isijinternational1966.23.1059 ↗
36. P.H. Shipway and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1995, vol. 11, pp. 1116–28.10.1179/mst.1995.11.11.1116 ↗
37. E.A. Wilson: Met. Sci., 1984, vol. 18, pp. 471–84.10.1179/030634584790253155 ↗
38. E.A. Wilson: Iron Steel Inst. Jpn. Int., 1994, vol. 34, pp. 615–30.10.2355/isijinternational.34.615 ↗
39. B. Bay, N. Hansen, D.A. Hughes, and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205–19.10.1016/0956-7151(92)90296-Q ↗
40. S.W. Thompson, D.J. Colvin, and G. Krauss: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1557–71.10.1007/BF02649815 ↗
41. R.D. Townsend and J.S. Kirkaldy: Trans. ASM, 1968, vol. 61, pp. 605–19.
42. G. Spanos and M.G. Hall: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1519–34.10.1007/BF02649812 ↗
43. C.A. Dube, H.I. Aaronson, and R.F. Mehl: Rev. Met., 1958, vol. 55, p. 201.10.1051/metal/195855030201 ↗
44. J.V. Bee and R.W.K. Honeycombe: Metall. Trans. A, 1978, vol. 9A, pp. 587–93.10.1007/BF02646416 ↗
45. S. Okaguchi, H. Ohtani, and Y. Ohmori: Mater. Trans. JIM, 1991, vol. 32, pp. 697–704.10.2320/matertrans1989.32.697 ↗
46. G. Spanos, R.W. Fonda, R.A. Vandermeer, and A. Matuszeski: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 3277–93.10.1007/BF02669455 ↗
47. F. Hongsheng, Z. Yankang, and B. Bingzhe: Proc. Int. Conf. HSLA Steels ’85, J.M. Gray et al., eds., ASM INTERNATIONAL, Metals Park, OH, 1986, pp. 359–67.
48. T. Araki, K. Shibata, and H. Nakajima: Proc. Int. Conf. ICOMAT ’92, C.M. Wayman and J. Perkins, eds., Monterey Institute for Advanced Studies, Monterey, CA, 1993, pp. 767–72.
49. K. Shibata and K. Asakura: Iron Steel Inst. Jpn. Int., 1995, vol. 35, pp. 982–91.10.2355/isijinternational.35.982 ↗