Modeling Anisotropic Stress-Strain Response and Crystallographic Texture Evolution in α-Titanium during Large Plastic Deformation using Taylor-Type Models: Influence of Initial Texture and Purity
Source abstract
Abstract
The anisotropic strain-hardening behavior and texture evolution during large plastic strains were investigated in two different grades of α-titanium. A recently proposed Taylor-type crystal-plasticity model[1] was used to predict the crystallographic texture evolution and anisotropic stress-strain response of these materials during large plastic strains at ambient temperature. The reasonable agreement between the predictions and the measurements reported here demonstrates the potential of these models for a class of titanium alloys in which plastic deformation is accommodated by both crystallographic slip and deformation twinning. The results of this study also provided quantitative insights into the effects of purity level on the slip and twin-hardening parameters, which are also observed to be relatively insensitive to the initial texture in the sample.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Magnesium Alloys: Properties and Applications · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. X. Wu, S.R. Kalidindi, C. Necker, A.A. Salem: Acta Mater., 2007, vol. 55, pp. 423–3210.1016/j.actamat.2006.08.034 ↗
2. R.P. Singh, R.D. Doherty: Metall. Trans. A, 1992, vol. 23A, pp. 307–2010.1007/BF02660873 ↗
3. J.W. Christian, S. Mahajan: Progr. Mater. Sci., 1995, vol. 39, pp. 1–15710.1016/0079-6425(94)00007-7 ↗
4. S. Nemat-Nasser, W.G. Guo, J.Y. Cheng: Acta Mater., 1999, vol. 47, pp. 3705–2010.1016/S1359-6454(99)00203-7 ↗
5. E. El-Danaf, S.R. Kalidindi, R.D. Doherty: Int. J. Plast., 2001, vol. 17, pp. 1245–6510.1016/S0749-6419(00)00090-5 ↗
6. S. Mahajan, G.Y. Chin: Metall. Mater., 1973, vol. 21, p. 17310.1016/0001-6160(73)90059-X ↗
7. S. Asgari, E. El-Danaf, S.R. Kalidindi, R.D. Doherty: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1781–9510.1007/s11661-997-0109-3 ↗
8. G.T. Gray III: J. Phys. IV, 1997, vol. C3, p. 423
9. E. El-Danaf, S.R. Kalidindi, R.D. Doherty: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1223–3310.1007/s11661-999-0272-9 ↗
10. A.A. Salem, S.R. Kalidindi, R.D. Doherty, S.L. Semiatin: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 259–6910.1007/s11661-006-0171-2 ↗
11. R.J. Asaro: J. Appl. Mech., 1983, vol. 50, pp. 921–3410.1115/1.3167205 ↗
12. R.J. Asaro, A. Needleman: Acta Metall., 1985, vol. 33, pp. 923–5310.1016/0001-6160(85)90188-9 ↗
13. K.K. Mathur, P.R. Dawson: Int. J. Plast., 1989, vol. 5, pp. 67–9410.1016/0749-6419(89)90020-X ↗
14. S.R. Kalidindi, C.A. Bronkhorst, L. Anand: J. Mech. Phys. Solids, 1992, vol. 40, pp. 537–6910.1016/0022-5096(92)80003-9 ↗
15. M. Kothari, L. Anand: J. Mech. Phys. Solids, 1998, vol. 46, pp. 51–8310.1016/S0022-5096(97)00037-9 ↗
16. R.A. Lebensohn, H. Uhlenhut, C. Hartig, H. Mecking: Acta Mater., 1998, vol. 46, pp. 4701–0910.1016/S1359-6454(98)00132-3 ↗
17. S.R. Agnew, C.N. Tome, D.W. Brown, T.M. Holden, S.C. Vogel: Scripta Mater., 2003, vol. 48, pp. 1003–0810.1016/S1359-6462(02)00591-2 ↗
18. A. Staroselsky, L. Anand: Int. J. Plast., 2003, vol. 19, pp. 1843–6510.1016/S0749-6419(03)00039-1 ↗
19. A.A. Salem, S.R. Kalidindi, S.L. Semiatin: Acta Mater., 2005, vol. 53, pp. 3495–350210.1016/j.actamat.2005.04.014 ↗
20. G. Proust, C.N. Tome, G.C. Kaschner: Acta Mater., 2007, vol. 55, pp. 2137–4810.1016/j.actamat.2006.11.017 ↗
21. P.A. Turner, C.N. Tome: Acta Metall., 1994, vol. 42, pp. 4143–5310.1016/0956-7151(94)90191-0 ↗
22. S.R. Agnew, P. Mehrotra, T.M. Lillo, G.M. Stoica, P.K. Liaw: Acta Mater., 2005, vol. 53, pp. 3135–4610.1016/j.actamat.2005.02.019 ↗
23. S. Balasubramanian, L. Anand: Acta Metall., 2002, vol. 50, pp. 133
24. T. Mohri, M. Mabuchi, M. Nakamura, T. Asahina: Mater. Sci. Eng., 2000, vol. A290, pp. 139–4410.1016/S0921-5093(00)00959-X ↗
25. J. Koike, R. Ohyama, T. Kobayashi, M. Suzuki, K. Maruyama: Mater. Trans., 2003, vol. 44, pp. 445–5110.2320/matertrans.44.445 ↗
26. A.A. Salem, S.R. Kalidindi, R.D. Doherty: Acta Mater., 2003, vol. 51, pp. 4225–3710.1016/S1359-6454(03)00239-8 ↗
27. A.A. Salem, S.R. Kalidindi, R.D. Doherty: Scripta Mater., 2002, vol. 46, pp. 419–2310.1016/S1359-6462(02)00005-2 ↗
28. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24
29. S.R. Kalidindi, A. Abusafieh, E. ElDanaf: Exp. Mech., 1997, vol. 37, pp. 210–1510.1007/BF02317861 ↗
30. J.S. Kallend, U.F. Kocks, A.D. Rollett, H.R. Wenk: Mater. Sci. Eng., 1991, vol. A132, pp. 1–1110.1016/0921-5093(91)90355-Q ↗
31. A.A. Salem, S.R. Kalidindi, R.D. Doherty, M.G. Glavicic, and S.L. Semiatin: Ti-2003 Sci. Technol., 2004, pp. 1429–36
32. S.R. Kalidindi: Int. J. Plast., 2001, vol. 17, pp. 837–6010.1016/S0749-6419(00)00071-1 ↗
33. R.A. Lebensohn, C.N. Tome: Acta Metall., 1993, vol. 41, p. 261110.1016/0956-7151(93)90130-K ↗