journal article·2019-10

Silicon Production via Reaction of Silicon Tetrachloride and Aluminum Subchloride

Roman A. Zakirov, Oleg G. Parfenov

Publisher page

Abstract

Silicon tetrachloride reduction by aluminum subchloride was studied experimentally. Aluminum subchloride was synthesized in a reaction of metallic aluminum and AlCl3; a burner-like construction of the reactor was used to avoid the direct reaction of aluminum and SiCl4. The reduction was conducted at a pressure of 0.1 MPa and two temperature regimes: 1273 K and 1373 K (1000 °C and 1100 °C). As a result, two types of products were obtained: crystals and fine particles. The crystals formation occurred in the high-temperature zone, whereas the particles were dispersed by argon flow and concentrated mainly in aluminum chloride by-product in the cold part of the reactor. It was shown that silicon yield increased with increasing AlCl concentration. The temperature of the reduction process did not have a significant effect on the ultimate silicon yield. However, the silicon etching reaction rate and fine particles yield increased as temperature increased. X-ray diffraction and scanning electron microscopy analysis showed that the impurities content in silicon crystals was below the detection limit. In contrast, the aluminum content in the powder product was 2 to 3 wt pct. Another type of product, yellow blanket-like silicon fibers, was obtained with a high yield at 1373 K (1100 °C) and low [AlCl]:[SiCl4] ratio.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Molten salt chemistry and electrochemical processes · Bauxite Residue and Utilization · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. 1. J. Safariana, G. Tranella and M. Tangstada: Energy Procedia, 2012, vol. 20, pp. 88 – 97.10.1016/j.egypro.2012.03.011 ↗
2. 2. K. Yasuda and T.H. Okabe: JOM, 2010, vol. 62 (12), pp. 94-101.10.1007/s11837-010-0190-8 ↗
3. 3. C.W. Won, H.H. Nersisyan and H.I. Won: Sol. Energy Mater. Sol. Cells, 2011, vol. 95, pp. 745-50.10.1016/j.solmat.2010.10.016 ↗
4. 4. X. Xie, K. Lau and A. Sanjurjo: Metal. Metall. Mater. Trans. E., 2016, vol. 4E, pp. 2017-29.
5. 5. K. Shinoda, H. Murakami, Y. Sawabe and K. Saegusa: Chem. Eng. J., 2012, vol. 198-199, pp. 61-64.10.1016/j.cej.2012.05.093 ↗
6. J. Myrick: Production of Metals and Their Alloys, WO 01/45906 A2, 2001.
7. 7. R.A. Zakirov, O.G. Parfenov and L.A. Solovyov: Metall. Mater. Trans. B, 2018, vol. 49B, pp.13-16.10.1007/s11663-017-1129-z ↗
8. 8. O.G. Parfenov and G.L. Pashkov: Dokl. Chem., 2008, vol. 422 (2), pp. 225–26.10.1134/S0012500808090061 ↗
9. 9. K. Yasuda, K. Saegusa and T.H. Okabe: Metall. Mater. Trans. B, 2011, vol. 42, pp. 37-49.10.1007/s11663-010-9440-y ↗
10. 10. T. Kikuchi, T. Yagihashi and T. Kurosawa: Mater. Trans. JIM, 1964, Vol. 5, pp. 122-27.10.2320/matertrans1960.5.122 ↗
11. 11. T. Kikuchi, T. Yagihashi and T. Kurosawa: Mater. Trans. JIM, 1972, Vol. 13, pp. 365-70.10.2320/matertrans1960.13.365 ↗
12. 12. N. Uesawa, S. Inasawa and Y. Tsuji: J. Phys. Chem. C, 2010, vol. 114, pp. 4291–96.10.1021/jp909920d ↗
13. 13. H. Schäffer: Chemical Transport Reactions, Academic press, New York and London, 1964, pp. 40-44.