Microstructure and Hot Oxidation Resistance of SiMo Ductile Cast Irons Containing Si-Mo-Al
Source abstract
Abstract
SiMo ductile cast irons are used as high-temperature materials in automotive components, because they are microstructurally stable at high operating temperatures. The effect of different amounts of Si and Mo as well as the addition of 3 wt pct Al on the microstructure, high-temperature oxidation, and mechanical properties of SiMo ductile cast iron was studied. Dilatometric measurements of SiMo ductile iron exhibited obvious differences in the transformation temperature A 1 due to presence of Al and the increase of Si. The microstructure of the SiMo alloys without Al addition showed outstanding nodularity and uniform nodule distribution. However, by adding 3 wt pct Al to low Si-SiMo ductile iron, some compacted graphite was observed. The results of oxidation experiments indicated that high Si-SiMo ductile iron containing 4 and 4.9 wt pct Si had superior resistance to lower Si-SiMo and SiMo ductile iron containing 3 wt pct Al. The results showed also that with increasing Si up to 4.9 wt pct or by replacing a part of Si with 3 wt pct Al, tensile strength increased while elongation and impact toughness decreased.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. M. Ekströmn and S. Jonsson: Mater. Sci. Eng. A, 2014, vol. 616, pp. 78–87.10.1016/j.msea.2014.08.014 ↗
2. Y.L. Yang, Z.Y. Cao, Y. Qi, and Y.B. Liu: J. Adv. Mater. Res., 2010, vol. 530, pp. 97–101.10.4028/www.scientific.net/AMR.123-125.97 ↗
3. F. Tholence and M. Norell: Surf. Interface Anal., 2002, vol. 34 (1), pp. 535–39.10.1002/sia.1355 ↗
4. Yun-long Yang, Zhan-yi Cao, Zhen-song Lian, and Hai-xia Yu: J. Iron Steel Res. Int., 2013, vol. 20 (6), pp. 52–57.10.1016/S1006-706X(13)60111-9 ↗
5. Cristiana Delprete and Raffaella Sesana: Mater. Des., 2014, vol. 57, pp. 528–37.10.1016/j.matdes.2014.01.002 ↗
6. S.H. Park, J.M. Kim, H.J. Kim, S.J. Ko, H.S. Park, and J.D. Lim: SAE Int., 2005, SAE Technical Paper No. 2005-01-1688.
7. E. Guzik, D. Kopyciński, and D. Wierzchowski: Arch. Metall. Mater., 2014, vol. 59, pp. 687–91.10.2478/amm-2014-0112 ↗
8. D. Li, R. Perrin, G. Burger, D. McFarlan, B. Black, R. Logan, and R. Williams: Advances in Lightweight Automotive Castings and Wrought Aluminum Alloys (SP-1838), SAE World Congress, Detroit, MI, Mar. 8–11, 2004, pp. 1–12.
9. G. Weber, G. Faubert, M. Rothwell, A. Tagg, D.J. Wirth (1998) Mod. Casting, 88(3):48–51.
10. B. Black, G. Burger, R. Logan, and R. Perrin: SAE Int., 2002, SAE Technical Paper No. 2002-01-2115.
11. M.J. Kadhim, A.N. Abood, and H. Zainalabidin: Mod. Appl. Sci., 2010, vol. 4 (12), pp. 130–3510.5539/mas.v4n12p130 ↗
12. F. Mampaey: AFS Trans., 2005, pp. 1–21.10.17159/1947-9417/2017/1492 ↗
13. A.R. Kiani-Rashid: Dissertation, University of Leeds, Leeds, United Kingdom, 2000.
14. S.M.A. Boutorabi: Dissertation, University of Birmingham, Birmingham, United Kingdom, 1991.
15. A.R. Kiani-Rashid and D.V. Edmonds: J. Alloys Compd., 2009, vol. 477, pp. 391–98.10.1016/j.jallcom.2008.10.038 ↗
16. A.R. Kiani Rashid and D.V. Edmonds: Surf. Interface Anal., 2004, vol. 36, pp. 1011–13.10.1002/sia.1825 ↗
17. M.M. Haque: J. Mater. Process. Technol., 2007, vol. 191, pp. 360–63.10.1016/j.jmatprotec.2007.03.030 ↗
18. K.M. Pedersen and N.S. Tiedje: Mater. Charact., 2008, vol. 59, pp. 1111–21.10.1016/j.matchar.2007.09.001 ↗
19. D. Hardwick and G. Wallwork: Rev. High Temp. Mater., 1978, vol. 4, pp. 47–74.
20. H. Bakkerus and B. Van Der Holst: Mod. Casting, 1981, vol. 71, pp. 41–44.
21. R. Logan, C. Hartung, and A. Plowman: Ind. Found. J., 2011, vol. 57 (5), pp. 41–48.
22. R. Boeri and F. Weinberg: AFS Trans., 1989, vol. 97, pp. 179–84.
23. N.K. Datta and N.N. Engel: AFS Trans., 1976, vol. 84, pp. 431–36.
24. P.C. Liu and C.R. Loper, Jr.: AFS Trans., 1981, vol. 89, pp. 131–40.
25. P. Matteis, G. Scavino, A. Castello, and D. Firrao: Proc. Mater. Sci., 2014, vol. 3, pp. 2154–59.10.1016/j.mspro.2014.06.349 ↗
26. Ductile Iron Group: Ductile Iron Data for Design Engineers, Reprint, Rio Tinto Iron & Titanium Inc., Montreal, 1990.
27. N. Birks and G.H. Meier: Introduction to High Temperature Oxidation of Metals, Edward Arnold Ltd., London, 1983.
28. P. Kofstad: Elsevier Applied Science Publisher Ltd., Essex, England, 1988.
29. F. Tholence and M. Norell: Oxid. Met., 2008, vol. 69, pp. 13–36.10.1007/s11085-007-9081-y ↗
30. J.R. Davis, ed., ASM Specialty Handbook: Cast Irons, ASM International, Materials Park, 1996.
31. W.D. Callister: Materials Science and Engineering: An Introduction, 7th ed., John Wiley & Sons, Inc., New York, NY, 2007.
32. A. Alhussein, M. Risbet, A. Bastien, J.P. Chobaut, D. Balloy, and J. Favergeon: Mater. Sci. Eng. A, 2014, vol. 605, pp. 222–28.10.1016/j.msea.2014.03.057 ↗