journal article·2016-02

Material Flow Modification in a FSW Through Introduction of Flats

Judy Schneider, Shane Brooke, Arthur C. Nunes

Publisher page

Abstract

Friction stir welding (FSW) is a solid-state process in which a non-consumable weld tool is used to stir metal together to obtain a fully consolidated weld seam. There is controversy regarding the contributions of various attributes of the pin design, especially with regards to flats and flutes. In this study, similar FSWs made with threaded cylindrical pin-tools having 0, 1, 2, 3, 4, and 5 flats were compared. Slight increases in torque were noted with increasing flats. Significant changes in the FSW structure with varying numbers of flats were observed, but without significant changes in tensile strength. Changes in the textural banding shape, the addition of sub-bands, and a new set of bands from coalescence of band kinks constitute the structural changes observed. Explanations of these structural changes in terms of tool interactions with the FSW metal are offered.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · RFID technology advancements

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. R. Rai, A. De, H.K.D.H. Bhadeshia, and T. DebRoy: Sci. Technol. Weld. Join., 2011, vol. 16 (4), pp. 325–42.10.1179/1362171811Y.0000000023 ↗
2. R.S. Mishra and M.W. Mahoney: Friction Stir Welding And Processing, pp. 7–35, ASM International Publication, Materials Park, OH, 2007.
3. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
4. W.M. Thomas, E.D. Nicholas, and S.D. Smith: in Proceedings of 2001 TMS Annual Meeting Automotive Alloys and Joining Aluminum Symposium, G. Kaufman, J. Green, and S.K. Das, eds., TMS Publication, Warrendale, 2001, pp. 213–24.
5. R. Nandan, T. Debroy, and H.K.D.H. Bhadeshia: Progress in Materials Science 2008, vol. 53, pp. 980–1023.10.1016/j.pmatsci.2008.05.001 ↗
6. R.W. Fonda, K.E. Knipling, C.R. Feng, and D.W. Moon: in Friction Stir Welding & Processing IV, R.S. Mishra, M.W. Mahoney, E.J. Lienert, K.V. Jata, eds., Wiley Pubication, New York, 2007, pp. 295–301.
7. A.L. Pilchak, Z.T. Li, J.J. Fisher, A.P. Reynolds, M. Juhas, and J. Williams: in Friction Stir Welding & Processing IV, R.S. Mishra, M.W. Mahoney, E.J. Lienert, K.V. Jata, eds., Wiley Publication, New York, 2007, pp. 419–28.
8. J.C. McClure, W. Tang, L.E. Murr, and X. Guo: in Proceedings of the 5th International Conference on Trends in Welding Research, ASM International Publication, Materials Park, 1998, pp. 590–95.
9. Y.J. Chao, X. Qi, and W. Tang: Trans. ASME 2003, vol. 125, pp. 138–45.
10. O. Frigaard, O. Grong, and O.T. Midling: Metall. Mater. Trans., 2011, vol. 32A, pp. 1189–200.
11. K. Kumar and S.V. Kailas: Mater. Sci. Eng. A, 2008, vol. 485(1–2), pp. 367–74.10.1016/j.msea.2007.08.013 ↗
12. H. Schmidt, J. Hattel, and J. Wert: Simul. Mater. Sci. Eng., 2004, vol. 12, pp. 143–57.10.1088/0965-0393/12/1/013 ↗
13. M.Z.H. Khandkar, J.A. Khan, and A.P. Reynolds: Sci. Technol. Weld. Join., 2003, vol. 8 (3), pp. 165–74.10.1179/136217103225010943 ↗
14. C.M. Chen and R. Kovacevic: Int. J. Mach. Tools Manuf., 2003, vol. 43, pp. 1319–26.10.1016/S0890-6955(03)00158-5 ↗
15. H. Schmidt and J. Hattel: Scripta Mater., 2008, vol. 58, pp. 332–37.10.1016/j.scriptamat.2007.10.008 ↗
16. Z.W. Chen, T. Pasang, and Y. Qi: Mater. Sci. Eng. A, 2008, vol. 474, pp. 312–16.10.1016/j.msea.2007.05.074 ↗
17. K.N. Krishnan: Mater. Sci. Eng. A, 2002, vol. 327, pp. 246–51.10.1016/S0921-5093(01)01474-5 ↗
18. K. Elangovan and V. Balasubramanian: Mater. Des., 2008, vol. 29(2), pp. 362–73.10.1016/j.matdes.2007.01.030 ↗
19. K. Elangovan and V. Balasubramanian: Mater. Sci. Eng. A, 2007, vol. 459, pp. 7–18.10.1016/j.msea.2006.12.124 ↗
20. A. Arora, A. De, and T. DebRoy: Scripta Mater., 2011, vol. 64(1), pp. 9–12.10.1016/j.scriptamat.2010.08.052 ↗
21. G. Buffa, J. Hua, R. Shivpuri, and L. Fratini: Mater. Sci. Eng. A, 2006, vol. 419, pp. 381–88.10.1016/j.msea.2005.09.041 ↗
22. P.A. Colegrove and H.R. Shercliff: J. Mater. Process. Technol., 2005, vol. 169, pp. 320–27.10.1016/j.jmatprotec.2005.03.015 ↗
23. A.C. Nunes, Jr.: in Proceedings of 2001 TMS Annual Meeting Automotive Alloys and Joining Aluminum Symposium, G. Kaufman, J. Green, and S.K. Das, eds., TMS Publication, Warrendale, 2001, pp. 235–48.
24. F. Gratecap, M. Girard, S. Marya, and G. Racineux: Int. J. Mater. Form., 2011, vol. 5, pp. 99–107.10.1007/s12289-010-1008-5 ↗
25. R.M. Leal, C. Leitaoa, A. Loureiroa, D.M. Rodriguesa, and P. Vilac: Mater. Sci. Eng. A, 2008, vol. 498, pp. 384–91.10.1016/j.msea.2008.08.018 ↗
26. P.F. Mendez, K.E. Tello, and T.J. Lienert: Acta Mater., 2010, vol. 58, pp. 6012–26.10.1016/j.actamat.2010.07.019 ↗
27. K. Kumar, S.V. Kailas, and T.S. Srivatsan: Matls. Mfgt. Proc., 2008, vol. 23, pp. 189–95.
28. Y.N. Zhang, Z. Cao, S. Larose, and P. Wanjara: Can. Metall. Q., 2012, vol. 51(3), pp. 250–61.10.1179/1879139512Y.0000000015 ↗
29. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P. Temple-Smith, and C.J. Dawes: International Patent Application No. PCT/GB92/02203 and GP Patent#9125978.9, Friction Stir Butt Welding, 1991.
30. O. Lorrain, V. Favier, H. Zahrouni, and D. Lawrjaniec: J. Mater. Process. Technol., 2010, vol. 210(4), pp. 603–09.10.1016/j.jmatprotec.2009.11.005 ↗
31. S.P. Vaze, J. Xu, R.J. Ritter, K.J. Colligan, J.J. Fisher, Jr., and J.R. Pickens: Mater. Sci. Forum, 2003, vol. 426–432, pp. 2979–86.10.4028/www.scientific.net/MSF.426-432.2979 ↗
32. Z. Loftus, J. Takeshita, A.P. Reynolds, and W. Tang: in Proceedings of 5th International Conference on FSW, TWI Publication, Huntsville, 2003.
33. W.M. Thomas, E D. Nicholas, J.C. Needham, P. Temple-Smith, S.W.K.W. Kallee, and C.J. Dawes: U.K. Patent Application 2306366, Friction Stir Welding, 1996.
34. W.M. Thomas, K.I. Johnson, and C.S. Wiesner: Adv. Eng. Mater., 2003, vol. 5(7), pp. 485–90.10.1002/adem.200300355 ↗
35. W.M. Thomas and R.E. Dolby: in Proceedings of 6th International Conference Trends in Welding Research, ASM International Publication, Materials Park, 2003, pp. 203–11.
36. D.A. Burford: US Patent 2008/0251571A1, Friction Stir Welding Tool Having a Counterflow Pin Configuration, 2008.10.1520/JAI101568 ↗
37. D. Rowe and W.M. Thomas: Materials Congress—Disruptive Technologies for Light Metals, Cedar Metals Ltd., TWI Publication, Huntsville, 2006.
38. K. Colligan: Weld. J., 1999, vol. 78, pp. 229s–37s.
39. T.U. Seidel and A.P. Reynolds: Metall. Mater. Trans., 2001, vol. 32A, pp. 2879–84.10.1007/s11661-001-1038-1 ↗
40. B. London, M.W. Mahoney, W. Bingel, M. Calabrese, R.H. Bossi, and D. Waldron: in Friction Stir Welding and Processing II, K.V. Jata, M. Mahoney, R. Mishra, S.L. Semiatin, and T. Lienert, eds., TMS Publication, Warrendale, 2003, pp. 3–12.
41. H.R. Doude, J.A. Schneider, and A.C. Nunes, Jr.: Metall. Trans. A., 2014, vol. 45A, pp. 4411–22.10.1007/s11661-014-2384-0 ↗
42. J.A. Schneider and A.C. Nunes, Jr.: Metall. Trans. B., 2004, vol. 35B, pp. 777–83.10.1007/s11663-004-0018-4 ↗
43. J. Marzbanrad, M. Akbari, P. Asadi, and S. Safaee: Metall. Trans. B, 2014, vol. 45B: pp. 1887–94.10.1007/s11663-014-0089-9 ↗
44. S.J. Vijay and N. Murugan: Mater. Des., 2010, vol. 31(7), pp. 3585–89.10.1016/j.matdes.2010.01.018 ↗
45. Z.W. Chen and S. Cui: Scripta Mater., 2008, vol. 58, pp. 417–20.10.1016/j.scriptamat.2007.10.026 ↗
46. M. Brendel and J.A. Schneider: in 9th International Friction Stir Welding Symposium, TWI Publication, Huntsville, 2012.
47. R.S. Mishra, T.A. Freeney, S. Webb, Y.L. Chen, D.R. Herling, and G.H. Grant: in Friction Stir Welding and Processing IV, R. S. Mishra, M.W. Mahoney, E.J. Lienert, and K.V. Jata, eds., Wiley Publication, New York, 2007, pp. 341–48.
48. K.J. Colligan, J. Xu, and J.R. Pickens: in Friction Stir Welding And Processing II, K.V. Jata, M.W. Mahoney, R.S. Mishra, S.L. Semiatin, and T. Lienert, eds., TMS Publication, Warrendale, 2003, pp. 181–90.
49. M. Boz and A. Kurt: Mater. Des., 2004, vol. 25, pp. 343–47.10.1016/j.matdes.2003.11.005 ↗
50. Y.S. Sato, S.H.C. Park, and H. Kokawa: Metall. Trans. A., 2001, vol. 32A, pp. 3032–42.
51. Y.S. Sato, M. Urata, and H. Kokawa: Metall. Trans. A, 2002, vol. 33A, pp. 625–35.10.1007/s11661-002-0124-3 ↗
52. Y.S. Sato, H. Kokawa, M. Enomoto, S. Jogan, and T. Hashimoto: Metall. Trans. A., 1999, vol. 20A, pp. 3125–30.10.1007/s11661-999-0223-5 ↗
53. Y.S. Sato and H. Kokawa: Metall. Trans. A., 2001, vol. 32A, pp. 3023–31.10.1007/s11661-001-0177-8 ↗
54. J.A. Schneider, R. Stromberg, P. Schilling, B. Cao, W. Zhou, J. Morfa, and O.J. Myers: Weld. J., 2013, pp. 11s–19s.
55. J.W. Pew, T.W. Nelson, and C.D. Sorensen: Sci. Tech. Weld. Join., 2007, vol. 12, pp. 341–47.10.1179/174329307X197601 ↗
56. C. Jonckheere, B. de Meester, A. Denquin, and A. Simara: J. Mater. Proc. Technol., 2013, vol. 213, pp. 826–37.10.1016/j.jmatprotec.2013.01.001 ↗
57. J.A. Querin and J.A. Schneider: Weld. J., 2012, vol. 91, pp. 76s–82s.
58. ASM Metals Handbook, ASM International Publication, Materials Park, OH, 1990, vol. 2.
59. D.P. Field, T.W. Nelson, Y. Hovanski, and K.V. Jata: Metall. Trans. A., 2001, vol. 32A, pp. 2869–77.10.1007/s11661-001-1037-2 ↗
60. K.V. Jata and S.L. Semiatin: Scripta Mater., 2000, vol. 43, pp. 743–49.10.1016/S1359-6462(00)00480-2 ↗
61. P.B. Prangnell and C.P. Heason: Acta Mater., 2005, vol. 53, pp. 3179–92.10.1016/j.actamat.2005.03.044 ↗