Determination of Time-Spatial Varying Mold Heat Flux During Continuous Casting from Fast Response Thermocouples
Source abstract
Abstract
To ensure accurate estimation of mold heat flux, this study investigated the impacts of the thermocouples placement inserted in the mold wall, the temperature sampling rate (fs), and the noise level of temperature data on the precision of two-dimensional Inverse Heat Conduction Problem (2DIHCP). The results showed the accuracy of heat flux estimations decreases as the distance between the thermocouple and the mold surface increases, and it is recommended that the distance should not exceed 3 mm. The accuracy of the heat flux initially increases as fs increases from 5 to 10 Hz, reaches a relatively stable state as fs increases from 10 to 60 Hz, and eventually decreases as fs increases from 60 to 100 Hz. Additionally, higher temperature measurement errors typically lead to decreased accuracy in inverse analysis. 2DIHCP was employed to compute the heat flux for a mold simulator experiment, and the results demonstrated its effectiveness in reconstructing the mold heat flux at the meniscus level during the time lapse of a mold oscillation cycle.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Numerical methods in inverse problems · Advanced Sensor Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. R.B. Mahapatra, J.K. Brimacombe, and I.V. Samarasekera: Metall. Mater. Trans. B, 1991, vol. 22B, pp. 875–88.10.1007/BF02651164 ↗
2. X. Zhang, W. Chen, Y. Ren, and L. Zhang: Metall. Mater. Trans. B, 2019, vol. 50B, pp. 1444–60.10.1007/s11663-019-01570-8 ↗
3. H. Mizukami, Y. Shirai, and S. Hiraki: ISIJ Int., 2020, vol. 60(9), pp. 1968–77.10.2355/isijinternational.ISIJINT-2019-766 ↗
4. J. Yang, Z. Cai, D. Chen, and M. Zhu: Metall. Mater. Trans. B, 2019, vol. 50B, pp. 1104–13.10.1007/s11663-019-01511-5 ↗
5. J. Ji, Y. Cui, X. Zhang, Q. Wang, S. He, and Q. Wang: Steel Research International, 2021, vol. 92(10), p. 2100101.10.1002/srin.202100101 ↗
6. P.E.R. Lopez, K.C. Mills, P.D. Lee, and B. Santillana: Metall. Mater. Trans. B, 2012, vol. 43B(1), pp. 109–22.10.1007/s11663-011-9583-5 ↗
7. J.K. Brimacombe: Can. Metall. Q., 1976, vol. 15(2), pp. 163–75.10.1179/cmq.1976.15.2.163 ↗
8. J.A. Kromhout, E.R. Dekker, M. Kawamoto, and R. Boom: Ironmak. Steelmak., 2013, vol. 40(3), pp. 206–15.10.1179/1743281212Y.0000000030 ↗
9. R.J. O’Malley: Steelmak. Conf. Proc., 1999, vol. 82, pp. 13–34.
10. H. Zhang, W. Wang, F. Ma, and L. Zhou: Metall. Mater. Trans. B, 2015, vol. 46B(5), pp. 2361–73.10.1007/s11663-015-0413-z ↗
11. A. Badri, T.T. Natarajan, C.C. Snyder, K.D. Powers, F.J. Mannion, M. Byrne, and A.W. Cramb: Metall. Mater. Trans. B, 2005, vol. 36B(3), pp. 373–83.10.1007/s11663-005-0066-4 ↗
12. H. Zhang and W. Wang: Metall. Mater. Trans. B, 2016, vol. 47B(2), pp. 920–31.10.1007/s11663-015-0579-4 ↗
13. C.E. Shannon: Proc. IRE, 1949, vol. 37(1), pp. 10–21.10.1109/JRPROC.1949.232969 ↗
14. M. Roman, D. Balogun, C. Zhu, L. Bartlett, R.J. O’Malley, R.E. Gerald, and J. Huang: IEEE Trans. Instrum. Meas., 2021, vol. 70, pp. 1–10.10.1109/TIM.2021.3121500 ↗
15. J.V. Beck, B. Blackwell, and C.R. Clair Jr: Inverse Heat Conduction: Ill-Posed Problems, James Beck, 1985, pp. 1-300.
16. G. Blanc, M. Raynaud, and T.H. Chau: Revue générale de thermique, 1998, vol. 37(1), pp. 17–30.10.1016/S0035-3159(97)82463-4 ↗
17. Y. Liu, Z. Xu, X. Wang, and D. Zhang: Ironmak. Steelmak., 2021, vol. 48(8), pp. 901–08.10.1080/03019233.2020.1836709 ↗
18. M.O. Ansari, J. Ghose, S. Chattopadhyaya, D. Ghosh, S. Sharma, P. Sharma, A. Kumar, C. Li, R. Singh, and S.M. Eldin: Micromachines, 2022, vol. 13(12), p. 2148.10.3390/mi13122148 ↗
19. A.V.S. Oliveira, A. Avrit, and M. Gradeck: Int. J. Heat Mass Transf., 2022, vol. 185, 122398.
20. D. Balogun, M. Roman, R.E. Gerald, L. Bartlett, J. Huang, and R. O’Malley: Metall. Mater. Trans. B, 2023, vol. 54B(3), pp. 1326–41.10.1007/s11663-023-02764-x ↗
21. M.N. Özisik and H.R. Orlande: Inverse Heat Transfer: Fundamentals and Applications, CRC Press, Boca Raton, 2021, pp. 3–111.10.1201/9781003155157-2 ↗
22. A.S. Vaka, S. Ganguly, and P. Talukdar: Int. J. Therm. Sci., 2021, vol. 160, 106648.
23. C.A.M. Pinheiro, I.V. Samarasekera, J.K. Brimacomb, and B.N. Walker: Ironmak. Steelmak., 2000, vol. 27(1), pp. 37–54.10.1179/030192300677363 ↗
24. B.G. Thomas, M.A. Wells, and D. Li: Sensors, Sampling, and Simulation for Process Control, 2011, pp. 119-26.10.1002/9781118061800.ch14 ↗
25. X. Wang, L. Tang, X. Zang, and M. Yao: J. Mater. Process. Technol., 2012, vol. 212, pp. 1811–18.10.1016/j.jmatprotec.2012.04.001 ↗
26. P. Hu, X. Wang, J. Wei, M. Yao, and Q. Guo: ISIJ Int., 2018, vol. 58, pp. 892–98.10.2355/isijinternational.ISIJINT-2017-393 ↗
27. E.N. Dvorkin, M.A. Cavaliere, and M.B. Goldschmit: Comput. Struct., 2003, vol. 81, pp. 559–73.10.1016/S0045-7949(02)00402-9 ↗
28. M. Gonzalez, M.B. Goldschmit, A.P. Assanelli, E.N. Dvorkin, and E.F. Berdaguer: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 455–73.10.1007/s11663-003-0072-3 ↗
29. S. Chakraborty, S. Ganguly, E.Z. Chacko, S.K. Ajmani, and P. Talukdar: Int. J. Therm. Sci., 2017, vol. 118, pp. 435–47.10.1016/j.ijthermalsci.2017.05.012 ↗
30. H. Zhang, W. Wang, and L. Zhou: Metall. Mater. Trans. B, 2015, vol. 46B(5), pp. 2137–52.10.1007/s11663-015-0418-7 ↗
31. P. Jayakrishna, S. Chakraborty, S. Ganguly, and P. Talukdar: Can. Metall. Q., 2021, vol. 60(4), pp. 320–49.10.1080/00084433.2021.2014712 ↗
32. T. Rees, H.S. Dollar, and A.J. Wathen: SIAM J. Sci. Comput., 2010, vol. 32(1), pp. 271–98.10.1137/080727154 ↗
33. Y. Yu and X. Luo: Int. J. Heat Mass Transf., 2015, vol. 90, pp. 645–53.10.1016/j.ijheatmasstransfer.2015.07.008 ↗
34. I. Nowak, J. Smolka, and A.J. Nowak: Appl. Therm. Eng., 2010, vol. 30(10), pp. 1140–51.10.1016/j.applthermaleng.2010.01.029 ↗
35. M. Cui, Y. Zhao, B. Xu, and X.W. Gao: Int. J. Heat Mass Transf., 2017, vol. 107, pp. 747–54.10.1016/j.ijheatmasstransfer.2016.11.101 ↗
36. B. Zhang, J. Mei, M. Cui, X.W. Gao, and Y. Zhang: Int. J. Heat Mass Transf., 2019, vol. 140, pp. 909–17.10.1016/j.ijheatmasstransfer.2019.06.049 ↗
37. Y. Yu and X. Luo: Appl. Therm. Eng., 2017, vol. 114, pp. 36–43.10.1016/j.applthermaleng.2016.11.173 ↗
38. Y. Li, G. Wang, and H. Chen: Appl. Therm. Eng., 2015, vol. 80, pp. 396–403.10.1016/j.applthermaleng.2015.01.069 ↗
39. B.A. Tourn, J.C. Hostos, and V.D. Fachinotti: Int. Commun. Heat Mass Transf., 2023, vol. 142, 106647.10.1016/j.icheatmasstransfer.2023.106647 ↗
40. Y. Zeng, H. Wang, S. Zhang, Y. Cai, and E. Li: Int. J. Heat Mass Transf., 2019, vol. 134, pp. 185–97.10.1016/j.ijheatmasstransfer.2019.01.002 ↗
41. G. Wang, S. Wan, H. Chen, K. Wang, and C. Lv: J. Heat Transf. 2018, vol. 140(12), pp. 122301.10.1115/1.4040955 ↗
42. Y. Li, H. Wang, and X. Deng: Int. J. Heat Mass Transf., 2019, vol. 134, pp. 656–67.10.1016/j.ijheatmasstransfer.2019.01.069 ↗
43. F. Zhu, J. Chen, Y. Han, and D. Ren: Int. J. Heat Mass Transf., 2022, vol. 194, 123089.
44. B.A. Tourn, J.C. Hostos, and V.D. Fachinotti: Int. Commun. Heat Mass Transf., 2021, vol. 127, 105488.10.1016/j.icheatmasstransfer.2021.105488 ↗
45. J.V. Beck: Int. J. Heat Mass Transf., 1970, vol. 13, pp. 703–16.10.1016/0017-9310(70)90044-X ↗
46. C.U. Ahn, C. Park, D.I. Park, and J.G. Kim: Int. J. Heat Mass Transf., 2022, vol. 183, 122076.
47. K. Babu and T.S.P. Kumar: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 214–24.10.1007/s11663-009-9319-y ↗
48. B.A. Tourn, J.C. Hostos, and V.D. Fachinotti: Int. Commun. Heat Mass Transf., 2021, vol. 125, 105330.10.1016/j.icheatmasstransfer.2021.105330 ↗
49. A. Badri, T.T. Natarajan, C.C. Snyder, K.D. Powers, F.J. Mannion, and A.W. Cramb: Metall. Mater. Trans. B, 2005, vol. 36B(3), pp. 355–71.10.1007/s11663-005-0065-5 ↗
50. X. Xie, D. Chen, H. Long, M. Long, and K. Lv: Metall. Mater. Trans. B, 2014, vol. 45B(6), pp. 2442–52.10.1007/s11663-014-0127-7 ↗
51. P.C. Hansen: Numerical Algorithms, 1994, vol. 6(1), pp. 1–35.10.1007/BF02149761 ↗
52. H.R. Orlande, O. Fudym, D. Maillet, and R.M. Cotta: Thermal Measurements and Inverse Techniques, CRC Press, Boca Raton, 2011, pp. 233–619.10.1201/b10918 ↗
53. L. Olson and R. Throne: Inverse Prob. Eng., 2000, vol. 8(3), pp. 193–227.10.1080/174159700088027728 ↗
54. R.C. Aster, B. Borchers, and C.H. Thurber: Parameter Estimation and Inverse Problems, Elsevier, New York, 2018, pp. 93–252.
55. K.A. Woodbury and J.V. Beck: Int. J. Heat Mass Transf., 2013, vol. 62, pp. 31–39.10.1016/j.ijheatmasstransfer.2013.02.052 ↗
56. C.R. Vogel: Computational Methods for Inverse Problems, Society for Industrial and Applied Mathematics, Philadelphia, 2002, pp. 97–124.10.1137/1.9780898717570.ch7 ↗
57. M.N. Özisik: Heat Conduction, 2nd ed. Wiley, New York, 1993, pp. 62–75.
58. S. Khajehpour, M.R. Hematiyan, and L. Marin: Int. J. Heat Mass Transf., 2013, vol. 58(1–2), pp. 125–34.10.1016/j.ijheatmasstransfer.2012.10.075 ↗
59. H. Zhang and W. Wang: Metall. Mater. Trans. B, 2017, vol. 48B(2), pp. 779–93.10.1007/s11663-016-0901-9 ↗
60. W. Wang, X. Long, H. Zhang, and P. Lyu: ISIJ Int., 2018, vol. 58(9), pp. 1695–704.10.2355/isijinternational.ISIJINT-2018-275 ↗
61. A. Kamaraj, S. Tripathy, G. Chalavadi, P.P. Sahoo, and S. Misra: Steel Res. Int., 2022, vol. 93(3), p. 210012110.1002/srin.202100121 ↗
62. A.S. Jonayat and B.G. Thomas: Metall. Mater. Trans. B, 2014, vol. 45B, pp. 1842–64.10.1007/s11663-014-0097-9 ↗
63. A. Matsushita, K. Isogami, M. Takeyoshi, T. Ninomi, and K. Tsutsumi: Trans. Iron Steel Inst. Jpn., 1988, vol. 28, pp. 531–34.10.2355/isijinternational1966.28.531 ↗
64. E.Y. Ko, J. Choi, J.Y. Park, and I. Sohn: Met. Mater. Int., 2014, vol. 20, pp. 141–51.10.1007/s12540-014-1017-x ↗
65. J.Y. Park, E.Y. Ko, J. Choi, and I. Sohn: Met. Mater. Int., 2014, vol. 20, pp. 1103–14.10.1007/s12540-014-6013-7 ↗