journal article·2020-08

Mechanism of Incongruent Reactions Between Zr-Cu Melts and Solid Tungsten Carbide

Dong Wang, Yujin Wang

Publisher page

Abstract

The incongruent reactions between Zr-Cu melts and WC solid were studied. Mo was used as a tracer to track the movement of “heavy” W atoms during the incongruent reaction. In separate experiments, dense polycrystalline plates and porous preforms of W0.9Mo0.1C were reacted with Zr2Cu and Zr14Cu51 melts at 1200 °C, 1300 °C and 1600 °C for 15 minutes. The microstructure of the reactive interfaces was studied using scanning electron microscopy, transmission electron microscopy and energy-dispersive X-ray spectroscopy. The change of microstructure and chemical composition at the reactive interface was observed as a function of temperature, Zr content in the melt and radius of the W0.9Mo0.1C solid. When the Zr-Cu melts contact the W0.9Mo0.1C solid, W, Mo and C all dissolve in the melt. The precipitation of W and W2Zr is based on Zr activity in the Zr-Cu melt after a quick formation of ZrCx. Both the dissolution rate and the amount of WC solid increase with decreasing radius of the WC particles, increasing Zr content in the Zr-Cu melts, and increasing reaction temperature. If the dissolution rate of WC is fast enough and the WC particles are in small sizes, the dissolution-precipitation is the main aspect. If a continuous ZrC layer quickly forms to separate the WC solid from Zr-Cu melts. The reaction is, therefore, controlled by the diffusion of carbon through the W and/or ZrC layers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Nuclear Materials and Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Y.S. Hong and M.E. Wadsworth: Rate Processes of Extractive Metallurgy, Springer, Boston, MA, 1979.
2. Y. Zhang: Geochemical Kinetics, Princeton University Press: Princeton, 2008.
3. C.I. Steefel: in Kinetics of Water-Rock Interaction, S.L. Brantley, J.D. Kubicki, and A.F. White, eds., Springer: New York, 2008, pp. 545–589.10.1007/978-0-387-73563-4_11 ↗
4. M.K. Aghajanian, N.H. MacMillan, C.R. Kennedy, S.J. Luszcz, and R. Roy: J. Mater. Sci., 1989, vol. 24, pp. 658–70.10.1007/BF01107457 ↗
5. M. Ali, K.M. Knowles, P.M. Mallinson, and J.A. Fernie: Acta Mater., 2016, vol. 103, pp. 859–69.10.1016/j.actamat.2015.11.019 ↗
6. L. Chen, Y. Wang, M. Yao, J.-H. Ouyang, Y. Zhou, and Y. Guo: Corros. Sci., 2014, vol. 89, pp. 93–100.10.1016/j.corsci.2014.08.009 ↗
7. Y. Liu, D.W. Lipke, Y. Zhang, and K.H. Sandhage: Acta Mater., 2009, vol. 57, pp. 3924–31.10.1016/j.actamat.2009.04.052 ↗
8. J.A. Fernie, R.A.L. Drew, and K.M. Knowles: Int. Mater. Rev., 2009, vol. 54, pp. 283–331.10.1179/174328009X461078 ↗
9. S.K. Sadrnezhad and S.B. Raz: Metall. Mater. Trans. B, 2005, vol. 36, pp. 395–403.10.1007/s11663-005-0068-2 ↗
10. M.B. Dickerson, P.J. Wurm, J.R. Schorr, W.P. Hoffman, P.G. Wapner, and K.H. Sandhage: J. Mater. Sci., 2004, vol. 39, pp. 6005–6015.10.1023/B:JMSC.0000041697.67626.46 ↗
11. M. Caccia, M. Tabandeh-Khorshid, G. Itskos, A.R. Strayer, A.S. Caldwell, S. Pidaparti, S. Singnisai, A.D. Rohskopf, A.M. Schroeder, D. Jarrahbashi, T. Kang, S. Sahoo, N.R. Kadasala, A. Marquez-Rossy, M.H. Anderson, E. Lara-Curzio, D. Ranjan, A. Henry, and K.H. Sandhage: Nature, 2018, vol. 562, pp. 406–9.10.1038/s41586-018-0593-1 ↗
12. M.B. Dickerson, R.L. Snyder, and K.H. Sandhage: J. Am. Ceram. Soc., 2002, vol. 85, pp. 730–732.10.1111/j.1151-2916.2002.tb00164.x ↗
13. Y. Zhao, Y. Wang, Y. Zhou, and P. Shen: Scr. Mater., 2011, vol. 64, pp. 229–32.10.1016/j.scriptamat.2010.10.018 ↗
14. Y. Zhu, S. Wang, W. Li, S. Zhang, and Z. Chen: Scr. Mater., 2012, vol. 67, pp. 822–5.10.1016/j.scriptamat.2012.07.044 ↗
15. S. Zhang, S. Wang, Y. Zhu, and Z. Chen: Scr. Mater., 2011, vol. 65, pp. 139–42.10.1016/j.scriptamat.2011.03.033 ↗
16. S.-E. Hsu, C.-I. Chen, S. Yue, and F.K.-W. Li: J. Spacecr. Rockets, 1977, vol. 14, pp. 207–11.10.2514/3.57184 ↗
17. D.W. Lipke, Y. Zhang, Y. Liu, B.C. Church, and K.H. Sandhage: Spec. Issue Aerosp. Mater. Extreme Environ., 2010, vol. 30, pp. 2265–77.
18. Y.-W. Zhao, Fabrication, microstructure and mechanical properties of ZrC-W matrix composites produced by reactive melt infiltration method (In Chinese), Dissertation for the Doctoral degree in engineering, Harbin Institute of Technology, 2011.
19. Y.-W. Zhao, Y.-J. Wang, H.-X. Peng, and Y. Zhou: Int. J. Refract. Met. Hard Mater., 2012, vol. 30, pp. 196–9.10.1016/j.ijrmhm.2011.08.009 ↗
20. S. Zhang, S. Wang, W. Li, Y. Zhu, and Z. Chen: J. Alloys Compd., 2011, vol. 509, pp. 8327–32.10.1016/j.jallcom.2011.05.105 ↗
21. Z. Grzesik, M.B. Dickerson, and K.H. Sandhage: J. Mater. Res., 2003, vol. 18, pp. 2135–2140.10.1557/JMR.2003.0299 ↗
22. Y.-W. Zhao, Y.-J. Wang, Y. Zhou, H.-X. Peng, and G.-M. Song: J. Am. Ceram. Soc., 2011, vol. 94, pp. 3178–3180.10.1111/j.1551-2916.2011.04742.x ↗
23. Evans U R: J. Inst. Met., 1947, vol. 73, pp. 291–310.
24. J. Stringer: Corros. Sci., 1970, vol. 10, pp. 513–43.10.1016/S0010-938X(70)80036-1 ↗
25. H.O. Pierson: Handbook of Refractory Carbides and Nitrides Properties, Characteristics, Processing, and Applications, Park Ridge, N.J Noyes Publications, 1996.
26. I.L. Shabalin: Ultra-High Temperature Materials I: Carbon (Graphene/Graphite) and Refractory Metals, Netherlands, Springer, 2014, pp. 237, 451.10.1007/978-94-007-7587-9_7 ↗
27. D. Wang, Y. Wang, W. Deng, G. Song, and Y. Zhou: Mater. Chem. Phys., 2018, vol. 212, pp. 51–9.10.1016/j.matchemphys.2018.01.033 ↗
28. L.A. Giannuzzi and F.A. Stevie: Micron, 1999, vol. 30, pp. 197–204.10.1016/S0968-4328(99)00005-0 ↗
29. S.Y. Ahn and S. Kang: J. Am. Ceram. Soc., 2000, vol. 83, pp. 1489–94.10.1111/j.1151-2916.2000.tb01415.x ↗
30. V.N. Zagryazkin and B.F. Ushakov: Neorganicheskie Mater., 1975, vol. 11, pp. 2238–9.
31. D. Pellacio, M.S. EI-Genk, and D.P. Butt: Monterey CA, USA, 1993, pp. 836–49.
32. S. Park, J. Jung, S. Kang, B.W. Jeong, C.-K. Lee, and J. Ihm: J. Eur. Ceram. Soc., 2010, vol. 30, pp. 1519–26.10.1016/j.jeurceramsoc.2009.10.022 ↗
33. D.W. Lipke, Y. Zhang, Y. Cai, and K.H. Sandhage: J. Am. Ceram. Soc., 2012, vol. 95, pp. 2769–2772.10.1111/j.1551-2916.2012.05345.x ↗
34. C. Guo, C. Li, S. Shang, and Z. Du: Int. J. Mater. Res., 2014, vol. 105, pp. 1048–56.10.3139/146.111125 ↗
35. A.I. Zaitsev, N.E. Zaitseva, Yu.P. Alekseeva, E.M. Kuril’chenko, and S.F. Dunaev: Inorg. Mater., 2003, vol. 39, pp. 816–825.10.1023/A:1025069128404 ↗
36. W.D. Kingery and S.A. Rice: Kinetics of High-Temperature Processes. Wiley: New York, 1959.10.7551/mitpress/4061.001.0001 ↗
37. R. Zhang, Q. Cao, S. Pang, Y. Wei, and L. Liu: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 3–5.10.1016/S1468-6996(01)00017-1 ↗
38. M.H. Lee, J. Das, D.J. Sordelet, J. Eckert, and A.J. Hurd: Appl. Phys. Lett., 2012, vol. 101, p. 124103.10.1063/1.4754546 ↗
39. Y. Liu, Z. Long, H. Wang, Y. Du, and B. Huang: Scr. Mater., 2006, vol. 55, pp. 367–70.10.1016/j.scriptamat.2006.04.019 ↗
40. M. Walbrühl: Diffusion in the Liquid Co Binder of Cemented Carbides: Ab Initio Molecular Dynamics and DICTRA Simulations. Dissertation for the Master Degree, KTH Royal Institute of Technology, 2014.
41. M.X. Zhang, B. Huang, Q.D. Hu, and J.G. Li: Int. J. Refract. Met. Hard Mater., 2012, vol. 31, pp. 230–5.10.1016/j.ijrmhm.2011.11.008 ↗
42. R.J. Kirkpatrick: Am. Mineral., 1975, vol. 60, pp. 798–61.
43. M. Schick, J. Brillo, I. Egry, and B. Hallstedt: J. Mater. Sci., 2012, vol. 47, pp. 8145–8152.10.1007/s10853-012-6710-x ↗
44. V.N. Eremenko, R.V. Minakova, and M.M. Churakov: Sov. Powder Metall. Met. Ceram., 1977, vol. 16, pp. 283–6.10.1007/BF00806131 ↗