Prediction of Macrosegregation in Steel Ingots: Influence of the Motion and the Morphology of Equiaxed Grains
Source abstract
Abstract
Although a significant amount of work has already been devoted to the prediction of macrosegregation in steel ingots, most models considered the solid phase as fixed. As a result, it was not possible to correctly predict the macrosegregation in the center of the product. It is generally suspected that the motion of the equiaxed grains is responsible for this macrosegregation. A multiphase and multiscale model that describes the evolution of the morphology of the equiaxed crystals and their motion is presented. The model was used to simulate the solidification of a 3.3-ton steel ingot. Computations that take into account the motion of dendritic and globular grains and computations with a fixed solid phase were performed, and the solidification and macrosegregation formation due to the grain motion and flow of interdendritic liquid were analyzed. The predicted macrosegregation patterns are compared to the experimental results. Most important, it is demonstrated that it is essential to consider the grain morphology, in order to properly model the influence of grain motion on macrosegregation. Further, due to increased computing power, the presented computations could be performed using finer computational grids than was possible in previous studies; this made possible the prediction of mesosegregations, notably A segregates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. A. Hultgren: Scand. J. Metall., 1973, vol. 2, pp. 217–27
2. M.C. Flemings: Scand. J. Metall., 1976, vol. 5, pp. 1–15
3. R. Mehrabian, M. Keane, M.C. Flemings: Metall. Trans., 1970, vol. 1, pp. 1209–2010.1007/BF02900233 ↗
4. Y.-K. Chuang, K. Schwerdtfeger: Arch. Eisenhüttenwes, 1975, vol. 46, pp. 303–1010.1002/srin.197503632 ↗
5. A. Olsson, R. West, H. Fredriksson: Scand. J. Metall., 1986, vol. 15, pp. 104–12
6. W.D. Bennon, F.P. Incropera: Int. J. Heat Mass Transfer, 1987, vol. 30, pp. 2161–7010.1016/0017-9310(87)90094-9 ↗
7. S. Ganesan, D.R. Poirier: Metall. Trans. B, 1990, vol. 21B, pp. 173–8110.1007/BF02658128 ↗
8. D.R. Poirier, P.J. Nandapurkar, S. Ganesan: Metall. Trans. B, 1991, vol. 22B, pp. 889–90010.1007/BF02651165 ↗
9. J. Ni, C. Beckermann: Metall. Trans. B, 1991, vol. 22B, pp. 349–6110.1007/BF02651234 ↗
10. I. Ohnaka: in State of the Art of Computer Simulation of Casting and Solidification Processes, H. Fredriksson, ed., Les éditions de physique, Les Ulis, France, 1986, pp. 211–23
11. F. Roch, H. Combeau, J, Chevrier, and G. Lesoult: in Modeling of Casting, Welding and Advanced Solidification Processes V, M. Rappaz, M.R. Özgü, and K.W. Mahin, eds., TMS, Warrendale, PA, 1991, pp. 789–96
12. F. Roch, H. Combeau, I. Poitrault, J. Chevrier, G. Lesoult: 6th Int. Iron and Steel Congr., ISIJ, Nagoya, Japan, 1990, pp. 665–72
13. I. Vannier, H. Combeau, and G. Lesoult: Numiform ‘92, 4th International Conference on Numerical Methods in Industrial Forming Processes, J.-L. Chenot, R.D. Wood, and O.C. Zienkiewicz, eds., Balkema, Rotterdam, 1992, pp. 835–40
14. I. Vannier, H. Combeau, G. Lesoult: Mater. Sci. Eng., A, 1993, vol. 173, pp. 317–2110.1016/0921-5093(93)90236-8 ↗
15. J. Common, J. Delorme, P. Bastien: Rev. Metall., 1973, vol. 70(4), pp. 251–5810.1051/metal/197370040251 ↗
16. J.P. Gu, C. Beckermann: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1357–6610.1007/s11661-999-0284-5 ↗
17. C.Y. Wang, C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2754–6410.1007/BF02652369 ↗
18. B. Appolaire, V. Albert, H. Combeau, G. Lesoult: Acta Mater., 1998, vol. 46, pp. 5851–6210.1016/S1359-6454(98)00236-5 ↗
19. B. Appolaire, V. Albert, H. Combeau, G. Lesoult: ISIJ, 1999, vol. 39, pp. 263–7010.2355/isijinternational.39.263 ↗
20. A. Badillo, D. Ceynar, C. Beckermann: J. Cryst. Growth, 2007, vol. 309, pp. 197–21510.1016/j.jcrysgro.2007.09.018 ↗
21. A. Badillo, D. Ceynar, C. Beckermann: J. Cryst. Growth, 2007, vol. 309, pp. 216–2410.1016/j.jcrysgro.2007.09.019 ↗
22. B. Appolaire and H. Combeau: Int. Symp. Liquid Metal Processing and Casting, Ecole des Mines de Nancy, Nancy, France, 2003, pp. 233–39
23. B. Rabia: Doctoral Thesis, Institut National Polytechnique de Lorraine, Ecole des Mines de Nancy, Nancy, France, 2004
24. C. Camperola: Ecole des Mines d’Albi, Albi, France, internal note, 2003
25. I. Vannier: Doctoral Thesis, Institut National Polytechnique de Lorraine, Ecole des Mines de Nancy, Nancy, France, 1995
26. N. Ahmad, H. Combeau, J.-L. Desbiolles, T. Jalanti, G. Lesoult, J. Rappaz, M. Rappaz, C. Stomp: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 617–3010.1007/s11661-998-0143-9 ↗
27. J. Ni and C. Beckermann: J. Mater. Process. Manuf. Sci., 1993, vol. 2, pp. 217–31
28. S. Charmond: Technical Report, Ecole Nationale Supérieure de Chimie de Clermont-Ferrand, Clermont-Ferrand, France, 2005
29. S. Charmond: Master’s Thesis, Ecole Nationale Supérieure de Chimie de Clermont-Ferrand, Clermont-Ferrand, France, 2006
30. B. Appolaire, H. Combeau, G. Lesoult: Mater. Sci. Eng., A, 2008, vol. 487, pp. 33–4510.1016/j.msea.2007.11.030 ↗
31. W. Kurz, B. Giovanola, R. Trivedi: Acta Metall., 1986, vol. 34, pp. 823–3010.1016/0001-6160(86)90056-8 ↗
32. M.C. Schneider, C. Beckermann: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 2373–8710.1007/BF02671251 ↗
33. M. Založnik and B. Šarler: in Modeling of Casting, Welding and Advanced Solidification Processes XI, C.-A. Gandin and M. Bellet, eds., TMS, Warrendale, PA, 2006, pp. 243–50
34. C. Beckermann: Int. Mater. Rev., 2002, vol. 47, pp. 243–6110.1179/095066002225006557 ↗