journal article·2022-03-29Open access

Fatigue Performance of Laser Welds in Heavy-Gage Press Hardening Steels

Diego Tolotti de Almeida, Kleber Eduardo Bianchi, João Henrique Corrêa de Souza, Milton Sergio Fernandes de Lima, Thomas Gabriel Rosauro Clarke, Fabio Pinto da Silva, Hardy Mohrbacher

Metals· Volume 12· Issue 4

Abstract

This work investigates and compares the fatigue performance of laser-welded joints of two press hardening steels: a standard 22MnB5 and a variant modified by a combination of niobium and molybdenum (NbMo) alloying. The results indicate that joint geometry aspects, superposed to an intrusion-generated damage mechanism, were prevalent in causing a poor fatigue life in the case of peak stress values greater than 11% of the base metal's ultimate strength being around 1450 MPa. As identical process procedures were employed, the tests allowed investigating the influence of the alloy design on fatigue performance. The results of geometrical analysis and fatigue tests indicated that the NbMo modified alloy performed better than the standard 22MnB5 steel. The results also suggest that, if extremely tight quality limits are used in the manufacturing procedures, laser-welded joints of press hardened steels could offer a very favorable fatigue performance being considerably better than that of conventional and high strength structural steels.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Physical Metallurgy Laboratory/LAMEF–Federal University of Rio Grande do Sul (UFRGS), Porto Alegre 91501-970, Brazil

Bruning Tecnometal Ltda, Panambi 98280-000, Brazil

School of Engineering, Federal University of Rio Grande, Porto Alegre 96203-900, Brazil

Institute for Advanced Studies/IEAV, Technological Institute of Aeronautics/ITA, São José dos Campos 12228-900, Brazil

Materials and Design Selection Lab, Federal University of Rio Grande do Sul (UFRGS), Porto Alegre 90040-020, Brazil

Department of Materials MTM, Leuven University (KU Leuven), 3001 Heverlee, Belgium

NiobelCon BV, 2970 Schilde, Belgium

References (21)

Show source-provided references
1. Influence of Microstructure on the Fracture Toughness of Hot Stamped Boron Steel10.1016/j.msea.2018.11.080 ↗
2. Fracture Properties of High Performance Steels and Their Welds10.1016/j.engfracmech.2015.01.007 ↗
3. Fatigue Resistance of Press Hardened 22MnB5 Steels10.1016/j.ijfatigue.2019.105262 ↗
4. The Effect of Quenching and Defects Size on the HCF Behaviour of Boron Steel10.1016/j.ijfatigue.2014.06.002 ↗
5. Factors Influencing the Mechanism of Superlong Fatigue Failure in Steels10.1046/j.1460-2695.1999.00187.x ↗
6. Course of SN-Curves Especially in the High-Cycle Fatigue Regime with Regard to Component Design and Safety10.1016/j.ijfatigue.2006.11.015 ↗
7. Fatigue Strength of Laser-Welded Thin-Plate Ship Structures Based on Nominal and Structural Hot-Spot Stress Approach10.1080/17445302.2013.850208 ↗
8. Fatigue Strength of Welded Butt Joints in Thin and Slender Specimens10.1016/j.ijfatigue.2012.05.009 ↗
9. Maddox, S. (2002). Fatigue Strength of Welded Structures, Elsevier.
10. Review of Fatigue Assessment Procedures for Welded Aluminium Structures10.1016/S0142-1123(03)00063-X ↗
11. Fatigue Behaviour of Butt Welded Joints in a High Strength Steel10.1016/j.proeng.2010.03.075 ↗
12. Light Weighting Opportunities and Material Choice for Commercial Vehicle Frame Structures from a Design Point of View10.1007/s40436-015-0103-8 ↗
13. Effect of Welding Parameters on Microstructure and Mechanical Properties of Laser Welded Al-Si Coated 22MnB5 Hot Stamping Steel10.1016/j.jmatprotec.2019.03.006 ↗
14. Hobbacher, A.F. (2016). Recommendations for Fatigue Design of Welded Joints and Components, Springer International Publishing.10.1007/978-3-319-23757-2 ↗
15. Radaj, D., Sonsino, C.M., and Fricke, W. (2006). Introduction. Fatigue Assessment of Welded Joints by Local Approaches, Elsevier.10.1533/9781845691882 ↗
16. The Effect of Laser Welding on Microstructure and Mechanical Properties in Heavy-Gage Press Hardening Steel Alloys10.1016/j.msea.2021.141341 ↗
17. Stresses and Fatigue of Laser Welds10.1016/j.procir.2018.08.142 ↗
18. Influence of Weld Quality on the Fatigue Strength of Thin Normal and High Strength Steel Butt Joints10.1007/s40194-016-0326-8 ↗
19. Review on Fracture and Crack Propagation in Weldments—A Fracture Mechanics Perspective10.1016/j.engfracmech.2014.05.012 ↗
20. Effect of Weld Defects on the Fatigue Strength of Ultra High-Strength Steels10.1016/j.proeng.2016.08.883 ↗
21. The Fatigue Performance of High Temperature Vacuum Carburized Nb Modified 8620 Steel