Microstructural Evolution and Mechanical Properties of Graphene-Reinforced Ti-6Al-4V Composites Synthesized via Spark Plasma Sintering
Source abstract
Abstract
Ti-6Al-4V alloy (TC4) with different concentrations of graphene nanoplatelets (GNPs) were fabricated by ball milling and spark plasma sintering (SPS). Microstructure characteristics of the composites were characterized by X-Ray Diffraction (XRD), Scanning electron microscopy (SEM), and Raman. Microhardness and the compressive mechanical properties were also investigated. Experimental results showed that in the process of SPS, most of the GNPs were still retained at high pressure and temperature, and a new phase of TiC was presented due to the in-situ reaction between TiC and GNPs. Also, the strength of the composites was depended on the concentration of GNPs in TC4 matrix. Consequently, the composite with 0.8 wt. % GNPs was increased 18% in microhardness. The maximum yield strength and ductility of the composite were increased by 22.2% and 43.2%, respectively. The strengthening mechanism of the composites was further discussed, and the Orowan strengthening mechanism was the main strengthening factor.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Titanium Alloys Microstructure and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Metallurgy Engineering, Xi’an University of Architecture and Technology, Xi’an 710055, China
School of Materials Science and Engineering, Northeastern University, Shenyang 110819, China
Titanium Alloy Institute, Northwest Institute for Nonferrous Metal Research, Xi’an 710016, China
Funding
National Natural Science Foundation of China
References (43)
Show source-provided references
1. Electric field effect in atomically thin films10.1126/science.1102896 ↗
2. Detection of individual gas molecules adsorbed on grapheme10.1038/nmat1967 ↗
3. Uniform dispersion and interface analysis of nickel coated graphene nanoflakes/pure titanium matrix composites10.1016/j.carbon.2018.05.013 ↗
4. Measurement of the elastic properties and intrinsic strength of monolayer grapheme10.1126/science.1157996 ↗
5. Toughening in graphene ceramic composites10.1021/nn200319d ↗
6. Effects of graphene content on the microstructure and properties of copper matrix composites10.1016/j.carbon.2015.10.023 ↗
7. Preparation of graphene nanoplatelets-copper composites by a modified semi-powder method and their mechanical properties10.1016/j.jallcom.2015.10.252 ↗
8. Copper-graphene bulk composites with homogeneous graphene dispersion and enhanced mechanical properties10.1016/j.msea.2015.12.039 ↗
9. Deformation behavior of aluminum alloy matrix composites reinforced with few-layer grapheme10.1016/j.compositesa.2015.08.001 ↗
10. Synthesis and mechanical properties of Al matrix composites reinforced with few-layer graphene and graphene oxide10.1016/j.jallcom.2017.08.268 ↗
11. Strengthening and toughening mechanisms in graphene-Al nanolaminated composite micro-pillars10.1016/j.actamat.2016.11.043 ↗
12. Enhanced overall strength and ductility of magnesium matrix composites by low content of graphene nanoplatelets10.1016/j.compositesa.2017.05.011 ↗
13. Ultra-high strengthening efficiency of graphene nanoplatelets reinforced magnesium matrix composites10.1016/j.msea.2017.11.040 ↗
14. Strengthening mechanism in graphene nanoplatelets reinforced aluminum composite fabricated through spark plasma sintering10.1016/j.msea.2017.04.009 ↗
15. Preparation mechanism of hierarchical layered structure of graphene/copper composite with ultrahigh tensile strength10.1016/j.carbon.2017.10.095 ↗
16. Lütjering, G., Williams, J.C., and Gysler, A. (2007). Titanium Engineering Materials and Progresses, Springer. [2nd ed.].
17. High-temperature properties of extruded titanium composites fabricated from carbon nanotubes coated titanium powder by spark plasma sintering and hot extrusion10.1016/j.compscitech.2012.05.002 ↗
18. Rapid and low temperature spark plasma sintering synthesis of novel carbon nanotube reinforced titanium matrix composites10.1016/j.carbon.2015.08.061 ↗
19. Microstructure and mechanical properties of insitu synthesized TiB whiskers reinforced titanium matrix composites by high-velocity compaction10.1016/j.powtec.2014.07.048 ↗
20. Self-assembled, aligned TiC nanoplatelet-reinforced titanium composites with outstanding compressive properties10.1016/j.scriptamat.2013.03.017 ↗
21. Powder metallurgy titanium metal matrix composites reinforced with carbon nanotubes and graphite10.1016/j.compositesa.2012.12.005 ↗
22. Correlation between microstructures of SiC reinforced titanium matrix composite and liquid route processing parameters10.1007/s10853-015-9108-8 ↗
23. Preparation and mechanical performance of graphene platelet reinforced titanium nanocomposites for high temperature applications10.1016/j.jallcom.2018.06.148 ↗
24. Microstructure evolution and superior tensile properties of low content graphene nanoplatelets reinforced pure Ti matrix composites10.1016/j.msea.2017.01.072 ↗
25. Interface evolution and superior tensile properties of multi-layer graphene reinforced pure Ti matrix composite10.1016/j.matdes.2017.12.016 ↗
26. Modifification of microstructure and properties of Ti-47Al-2Cr-4Nb-0.3W alloys fabricated by SPS with trace multilayer graphene addition10.1016/j.matchar.2018.01.036 ↗
27. Carbonaceous nanomaterial reinforced Ti-6Al-4V matrix composites: Properties, interfacial structures and strengthening mechanisms10.1016/j.carbon.2020.04.009 ↗
28. Comparative study of first-and second-order Raman spectra of MWCNT at visible and infrared laser excitation10.1016/j.carbon.2006.03.003 ↗
29. Uniform dispersion of multi-layer graphene reinforced pure titanium matrix composites via flake powder metallurgy10.1016/j.msea.2018.04.056 ↗
30. Investigating aluminum alloy reinforced by graphene nanoflakes10.1016/j.msea.2014.06.077 ↗
31. Graphene-and-Copper Artificial Nacre Fabricated by a Preform Impregnation Process: Bioinspired Strategy for Strengthening-Toughening of Metal Matrix Composite10.1021/acsnano.5b01067 ↗
32. Comparison of electrical mixture rules for composites10.1007/BF01410321 ↗
33. On the rule of mixtures for the hardness of particle reinforced composites10.1016/S0921-5093(00)00909-6 ↗
34. On the use of shear-lag methods for analysis of stress transfer in unidirectional composites10.1016/S0167-6636(97)00023-9 ↗
35. Strengthening mechanisms of graphene sheets in aluminum matrix nanocomposites10.1016/j.matdes.2015.09.063 ↗
36. Finite-element analysis of thermal expansion and thermal mismatch stresses in a Cu–60vol%ZrWO composite10.1016/j.compscitech.2004.02.002 ↗
37. Reducing thermal mismatch stress in anodically bonded silicon–glass wafers: Theoretical estimation10.1117/1.JMM.16.1.015003 ↗
38. Contribution of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites10.1016/j.msea.2006.10.184 ↗
39. Coble Orowan Strengthening, and Dislocation Climb Mechanisms in a Nb-Modified Zircaloy Cladding10.1007/s11661-015-3060-8 ↗
40. Microstructure and Mechanical Properties of Oxide-Dispersion Strengthened Al6063 Alloy with Ultra-Fine Grain Structure10.1007/s11661-010-0510-1 ↗
41. Deformation mechanisms in fine-grained Ti-Al alloys10.1016/S0921-5093(96)10533-5 ↗
42. Inkson, In-situ Ti-6Al-4V/TiC composites synthesized by reactive spark plasma sintering: Processing, microstructure, and dry sliding wear behaviour
43. Dislocation generation due to differences between the coefficients of thermal expansion10.1016/0025-5416(86)90261-2 ↗