journal article·2025-07-04Open access

A Characterization of the Powder Yield Behaviors During a Hot Isostatic Pressing Process

Guozheng Quan, Wenjing Ran, Weiwei Dai, Qian Jiang, Yanze Yu, Yu Zhang

Metals· Volume 15· Issue 7

Abstract

The constitutive model significantly influences the accuracy of predicting the complex rheological behavior of hot isostatically pressed powders. The temperature plays a crucial role in determining material properties during hot isostatic pressing (HIP), making it essential to account for its effect on the yield model parameters to more accurately describe the densification evolution of powders. In this study, HIP experiments were conducted using two different process schemes, and the shrinkage deformation of the envelope under each scheme was analyzed. High-temperature uniaxial compression experiments were performed on HIP samples with varying densities to analyze and characterize the stress–strain response of the powder during HIP. A mesoscopic particle-scale high-temperature uniaxial compression model was developed based on the discrete element method (DEM), and the strain and stress values corresponding to different densities in the high-temperature uniaxial compression simulations were validated through experimental comparison. The strain evolution during the uniaxial compression process was analyzed, and the relationship between the parameters of the Shima–Oyane model and the temperature was established, leading to the development of a temperature-compensated Shima–Oyane model. Based on the obtained parameters at various densities and temperatures, a yield stress map for the nickel-based alloy was constructed. The accuracy of this model was verified by comparing experimental results with finite element method (FEM) simulations. The findings of this study contribute to a more precise prediction of densification behavior in thermally driven isostatic pressing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Chongqing Key Laboratory of Advanced Mold Intelligent Manufacturing, School of Material Science and Engineering, Chongqing University, Chongqing 400044, China

Jiangsu Advanced Manufacturing Engineering Technology Research Center for Marine Power System Parts, COSCO Shipping Marine Equipment & Spares (Nanjing) Co., Ltd., Nanjing 211121, China

Funding

National Natural Science Foundation of China · Chongqing Natural Science Foundation General Project

References (31)

Show source-provided references
1. Boris, B.I., Genrikh, G.S., and Oleg, F.C. (1996, January 20–22). Prospect of HIP application in aerospace and power plant industry. Proceedings of the International Conference on Hot Isostatic Pressing, Andover, MA, USA.
2. Fundamental aspects of hot isostatic pressing: An overview10.1007/s11661-000-0078-2 ↗
3. Effects of Hot Isostatic Pressing (HIP) on Microstructure and Mechanical Properties of K403 Nickel-Based Superalloy10.1515/htmp-2014-0210 ↗
4. Effect of glass container encapsulation on deformation and densification behavior of metal powders during hot isostatic pressing10.1007/s12289-017-1361-8 ↗
5. An Overview of the Thermomechanical Processing of α/β Titanium Alloys: Current Status and Future Research Opportunities10.1007/s11661-020-05625-3 ↗
6. Densification mechanisms during hot isostatic pressing of stainless steel powder compacts10.1016/S0924-0136(02)00104-8 ↗
7. Densification Modeling of Titanium Alloy Powder during Hot Isostatic Pressing10.2298/SOS1103247X ↗
8. Influences of Powder Compaction Constitutive Models on the Finite Element Simulation of Hot Isostatic Pressing10.1016/j.procir.2016.07.025 ↗
9. Simulation and verification of near-net shaping a complex-shaped turbine disc by hot isostatic pressing process10.1007/s00170-014-6111-1 ↗
10. Numerical simulation and experimental investigation on densification, shape deformation, and stress distribution of Ti6Al4V compacts during hot isostatic pressing10.1007/s00170-016-8687-0 ↗
11. Forming and Simulation of Titanium Alloy Ti-6Al-4V by Hot Isostatic Pressing10.4028/www.scientific.net/AMR.848.50 ↗
12. A multi-scale study of Inconel 625 powders HIP process and construction of HIP maps10.1007/s00170-016-9650-9 ↗
13. Finite Element Analysis of Pressure Influence on Densification of Titanium Alloy Powder under Hot Isostatic Pressing10.4028/www.scientific.net/KEM.450.206 ↗
14. Constitutive behaviour of metal powder during hot forming. Part I: Experimental investigation with lead powder as a simulation material10.1016/S0997-7538(99)00102-3 ↗
15. Anisotropic shrinkage during hip of encapsulated powder10.1016/j.jmatprotec.2015.06.037 ↗
16. MPFEM simulation of compaction densification behavior of Fe-Al composite powders with different size ratios10.1016/j.jallcom.2018.01.198 ↗
17. Synergistic densification mechanism of irregular Ti powder during CIP: 3D MPFEM simulation with real-shape particles10.1016/j.matdes.2024.113368 ↗
18. MPFEM simulation on hot-pressing densification process of SiC particle/6061Al composite powders10.1016/j.jpcs.2021.110259 ↗
19. MPFEM investigation on densification and mechanical structures during ferrous powder compaction10.1016/j.apt.2024.104700 ↗
20. Investigation of densification behavior of tungsten powders during hot isostatic pressing with a 3D multi-particle FEM approach10.1016/j.powtec.2019.08.014 ↗
21. The study of relations between loading history and yield surfaces in powder materials using discrete finite element simulations10.1016/j.jmps.2011.11.009 ↗
22. Modeling yield properties of compacted powder using a multi-particle finite element model with cohesive contacts10.1016/j.powtec.2018.06.018 ↗
23. An investigation of contact interactions in powder compaction process through variable friction models10.1016/j.triboint.2015.12.016 ↗
24. Explicit finite element method simulation of consolidation of monolithic and composite powders10.1007/s11661-002-0386-9 ↗
25. Comparisons Between 2D and 3D MPFEM Simulations in Modeling Uniaxial High Velocity Compaction Behaviors of Ti-6Al-4V Powder
26. Experimental and 3D MPFEM simulation study on the green density of Ti-6Al-4V powder compact during uniaxial high velocity compaction10.1016/j.jallcom.2019.153226 ↗
27. A multiscale material model for metallic powder compaction during hot isostatic pressing10.1016/j.powtec.2023.118599 ↗
28. Multi-particle FEM modeling on hot isostatic pressing of Ti6Al4V powders10.1016/j.ijmecsci.2021.106288 ↗
29. 3D particulate-scale numerical investigation on hot isostatic pressing of W-Cu composites10.1016/j.powtec.2022.118150 ↗
30. Thoery of Plasticity for Porous Metals10.1299/jsme1958.16.1254 ↗
31. Plasticity theory for porous metals10.1016/0020-7403(76)90030-8 ↗