journal article·2021-04-01Open access

Integration of Processing and Microstructure Models for Non-Equilibrium Solidification in Additive Manufacturing

Noah Sargent, Mason Jones, Richard Otis, Andrew A. Shapiro, Jean-Pierre Delplanque, Wei Xiong

Metals· Volume 11· Issue 4

Abstract

Integration of models that capture the complex physics of solidification on the macro and microstructural scale with the flexibility to consider multicomponent materials systems is a significant challenge in modeling additive manufacturing processes. This work aims to link process variables, such as energy density, with non-equilibrium solidification by integrating additive manufacturing process simulations with solidification models that consider thermodynamics and diffusion. Temperature histories are generated using a semi-analytic laser powder bed fusion process model and feed into a CALPHAD-based ICME (CALPHAD: Calculation of Phase Diagrams, ICME: Integrated Computational Materials Engineering) framework to model non-equilibrium solidification as a function of both composition and processing parameters. Solidification cracking susceptibility is modeled as a function of composition, cooling rate, and energy density in Al-Cu Alloys and stainless steel 316L (SS316L). Trends in solidification cracking susceptibility predicted by the model are validated by experimental solidification cracking measurements of Al-Cu alloys. Non-equilibrium solidification in additively manufactured SS316L is investigated to determine if this approach can be applied to commercial materials. Modeling results show a linear relationship between energy density and solidification cracking susceptibility in additively manufactured SS316L. This work shows that integration of process and microstructure models is essential for modeling solidification during additive manufacturing.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Physical Metallurgy and Materials Design Laboratory, Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, PA 15261, USA

Department of Mechanical and Aerospace Engineering, University of California, Davis, CA 95616, USA

Engineering and Science Directorate, Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109, USA

Funding

National Aeronautics and Space Administration

References (30)

Show source-provided references
1. Solidification and liquation cracking issues in welding10.1007/s11837-003-0137-4 ↗
2. Böllinghaus, T., Herold, H., Cross, C.E., and Lippold, J.C. (2008). Hot cracking phenomena in welds II. Hot Cracking Phenomena in Welds II, Springer.10.1007/978-3-540-78628-3 ↗
3. Experimental study of structure formation in binary Al–Cu alloys at different cooling rates10.1016/j.msea.2005.05.105 ↗
4. Xiong, W., and Olson, G.B. (2016). Cybermaterials: Materials by design and accelerated insertion of materials. NPJ Comput. Mater., 2.10.1038/npjcompumats.2015.9 ↗
5. Integrated computational materials design for high-performance alloys10.1557/mrs.2015.273 ↗
6. Bobbio, L.D., Bocklund, B., Reichardt, A., Otis, R., Borgonia, J.P., Dillon, R.P., Shapiro, A.A., McEnerney, B.W., Hosemann, P., and Liu, Z.-K. (2020). Analysis of formation and growth of the σ phase in additively manufactured functionally graded materials. J. Alloys Compd., 814.10.1016/j.jallcom.2019.151729 ↗
7. Thermodynamic Investigation of New High-Strength Low-Alloy Steels with Heusler Phase Strengthening for Welding and Additive Manufacturing: High-Throughput CALPHAD Calculations and Key Experiments for Database Verification10.1007/s11669-020-00828-y ↗
8. Hyer, H., Zhou, L., Mehta, A., and Sohn, Y. (2020). Effects of Alloy Composition and Solid-State Diffusion Kinetics on Powder Bed Fusion Cracking Susceptibility. J. Phase Equilibria Diffus.10.1007/s11669-020-00844-y ↗
9. The metallurgy and processing science of metal additive manufacturing10.1080/09506608.2015.1116649 ↗
10. Linking process, structure, property, and performance for metal-based additive manufacturing: Computational approaches with experimental support10.1007/s00466-015-1240-4 ↗
11. Computation of Partial Equilibrium Solidification with Complete Interstitial and Negligible Substitutional Solute Back Diffusion10.2320/matertrans.43.551 ↗
12. Prediction of hot tearing tendency for multicomponent aluminum alloys10.1007/BF02735013 ↗
13. A criterion for cracking during solidification10.1016/j.actamat.2015.01.034 ↗
14. Crack susceptibility of binary aluminum alloys during solidification10.1016/j.actamat.2016.03.030 ↗
15. DICTRA, a tool for simulation of diffusional transformations in alloys10.1361/105497100770340057 ↗
16. Microsegregation behavior during solidification and homogenization of AerMet100 steel10.1007/s11663-998-0023-0 ↗
17. Diffusivities of an Al–Fe–Ni melt and their effects on the microstructure during solidification10.1016/j.actamat.2010.03.002 ↗
18. Computational thermodynamics in ferrite content prediction of austenitic stainless steel weldments
19. Application of Finite Element, Phase-field, and CALPHAD-based Methods to Additive Manufacturing of Ni-based Superalloys10.1016/j.actamat.2017.05.003 ↗
20. Simulation of TTT Curves for Additively Manufactured Inconel 62510.1007/s11661-018-4959-7 ↗
21. Wolfer, A.J., Aires, J., Wheeler, K., Delplanque, J.-P., Rubenchik, A., Anderson, A., and Khairallah, S. (2019). Fast solution strategy for transient heat conduction for arbitrary scan paths in additive manufacturing. Addit. Manuf., 30.10.1016/j.addma.2019.100898 ↗
22. Gilat, A., and Subramaniam, V. (2013). Numerical Methods for Engineers and Scientists, Wiley.
23. Wolfer, A.J. (2021). Physics-based Surrogate Modeling of Laser Powder Bed Fusion Additive Manufacturing. [Ph.D. Thesis, University of California Davis].
24. Hot Tearing in Al-Cu Alloys10.1080/09534962.1990.11819043 ↗
25. Novikov, I.I. (1966). Goryahelomkost Tsvetnykh Metallov i Splavov (Hot-Shortness of Nonferrous Metals and Alloys), Nauka.
26. Development of a New Hot-cracking Test for Aluminium Alloys10.1080/09534962.1989.11818994 ↗
27. Pumphrey, W. (1955). The Aluminum Development Association Report No. 27, Aluminum Development Association.
28. Mesoscopic simulation model of selective laser melting of stainless steel powder10.1016/j.jmatprotec.2014.06.001 ↗
29. Characterization of nano-scale oxides in austenitic stainless steel processed by powder bed fusion10.1016/j.scriptamat.2018.06.011 ↗
30. Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones10.1016/j.actamat.2016.02.014 ↗