journal article·2026-06-25Open access

Static Recrystallization Behavior and Microstructure Evolution of SA-508M Gr.3 Steel

Chuang Mao, Mingze Liu, Lanjun Ren, Xinrui Wang, Lei Sun, Jinhao Liu, Hongyu Yi, Dapeng Gu, Xingang Liu

Metals· Volume 16· Issue 7

Abstract

In this study, double-pass hot compression tests were conducted to systematically investigate the effects of hot deformation parameters on the static recrystallization (SRX) behavior of SA-508M Gr.3 steel used for nuclear reactor pressure vessels. The deformation temperatures were set to 950, 1050, and 1150 °C, with strain rates of 0.01, 0.1, and 1 s−1. The first-pass strains were 0.05, 0.10, and 0.15; the inter-pass time was fixed at 60 s; and the second-pass strain was maintained at 0.05. Based on the experimental data, a kinetic model describing SRX softening behavior was established. The activation energy for SRX was determined to be 81.45 kJ·mol−1, and the Avrami exponent was 0.5742. The characteristic time for 50% recrystallization (t0.5) was quantified under different deformation conditions. In addition, the microstructural evolution of SRX after double-pass hot compression was characterized using electron backscatter diffraction (EBSD). The results show that increasing the deformation temperature and strain rate leads to opposite trends in the flow stress during double-pass deformation, with the flow stress decreasing with temperature and increasing with strain rate. Meanwhile, inter-pass static softening is enhanced, resulting in a pronounced stress drop during the second pass. An increase in the first-pass strain further intensifies the stress drop and enhances the extent of SRX. EBSD analysis reveals consistent microstructural evolution: with increasing deformation temperature, strain rate, and the first-pass strain, the misorientation distribution shifts from low-angle grain boundaries (LAGBs) to high-angle grain boundaries (HAGBs), indicating an increased degree of SRX. These findings provide a theoretical basis and experimental support for process parameter optimization and engineering applications of SA-508M Gr.3 steel.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Engineering Research Center for Advanced Manufacturing Technology and Equipment of Heavy Castings and Forgings, Erzhong (Deyang) Heavy Equipment Co., Ltd., Deyang 618013, China

School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China

Sinomach Heavy Equipment Group Co., Ltd., Deyang 618000, China

Funding

National Engineering Research Center for Advanced Manufacturing Technology and Equipment of Heavy Castings and Forgings (Erzhong (Deyang) Heavy Equipment Co., Ltd.

References (23)

Show source-provided references
1. Characterization of high strength and high toughness Ni-Mo-Cr low alloy steels for nuclear application10.1016/j.ijpvp.2009.11.001 ↗
2. Recrystallization Behavior and Mechanical Property of a Medium-Si 12%Cr Reduced Activation Ferritic/Martensitic Steel Cladding Tube During the Manufacture10.1007/s40195-025-01868-4 ↗
3. Modeling flow stress constitutive behavior of SA508-3 steel for nuclear reactor pressure vessels10.1016/j.jnucmat.2011.07.011 ↗
4. The relation among the stored energy, microstructure and hardening effect of SA508-III steel under different deformation conditions10.1016/j.msea.2022.143333 ↗
5. Achieving Fine-Grained Microstructure in Low-Alloy Steel: A Study on Static Recrystallization Using Experimental and Simulation Approaches10.1002/srin.202500017 ↗
6. Hot deformation and recrystallization of austenitic stainless steel: Part I. Dynamic recrystallization
7. Rezvani, A., Ebrahimi, R., and Bagherpour, E. (2025). Static Recrystallization Simulation of Interstitial Free-Steel by Coupling Multi-Phase-Field and Crystal Plasticity Model Considering Dislocation Density Distribution. Adv. Eng. Mater., 27.10.1002/adem.202500117 ↗
8. Liu, L., Wu, Y., Gong, H., and Ahmad, A. (2020). Static softening behavior and modified kinetics of Al 2219 alloy based on a double-pass hot compression test. Materials, 13.10.3390/ma13173862 ↗
9. The dynamic and static softening mechanisms of LX82A steel in double-pass hot compression deformation10.1007/s10853-025-11412-5 ↗
10. Metadynamic and static recrystallization softening behavior of a bainite steel10.1007/s12540-017-7201-z ↗
11. Xu, Y., Zhao, Y., and Liu, J. (2020). A modified kinetics model and softening behavior for static recrystallization of 12Cr ultra-super-critical rotor steel. Mater. Res. Express, 7.10.1088/2053-1591/ab8c0c ↗
12. Mesoscale simulation of interfacial microstructure evolution and healing mechanism manufactured by solid state bonding for metals during isothermal treatment10.1016/j.jmrt.2025.10.014 ↗
13. Static recrystallization behaviors and mechanisms of 7Mo super-austenitic stainless steel with undissolved sigma precipitates during double-stage hot deformation10.1007/s42243-023-01079-0 ↗
14. Wang, Q., Hu, B., Zhao, H., and Ru, Y. (2024). Evolution of static recrystallization microstructure caused by residual strain of an Al-richen Ni-based single crystal superalloy. Mater. Sci. Eng. A, 894.10.1016/j.msea.2024.146188 ↗
15. Comparison of fracture properties in SA508 Gr. 3 and Gr. 4N high strength low alloy steels for advanced pressure vessel materials10.1016/j.ijpvp.2015.04.010 ↗
16. Static recrystallization behavior of SA508-III steel during hot deformation10.1016/S1006-706X(16)30074-7 ↗
17. Dynamic and static recrystallization behavior of low carbon high niobium microalloyed steel10.1016/S1006-706X(11)60011-3 ↗
18. The kinetics of dynamic and static softening during multistage hot deformation of 7150 aluminum alloy10.1016/j.msea.2012.05.039 ↗
19. Static recrystallization of 30Cr2Ni4MoV ultra-super-critical rotor steel10.1007/s11665-014-1083-8 ↗
20. Prediction of post-deformation recrystallization kinetics in AISI 321 austenitic stainless steel using double-stage hot compression10.1007/s11665-019-04139-3 ↗
21. Li, Z., Qi, Q., Gao, Y., and Chen, H. (2025). Kinetic modeling and grain refinement mechanisms during static recrystallization of GH4169 superalloy. Mater. Today Commun., 49.10.1016/j.mtcomm.2025.114095 ↗
22. Investigation on metadynamic recrystallization behavior in SA508-III steel during hot deformation10.1016/j.jmapro.2017.07.008 ↗
23. Dynamic recrystallization behavior of a γ′-hardened nickel-based superalloy during hot deformation10.1016/j.jallcom.2014.11.056 ↗