journal article·2002-07

A study of the corrosion properties of plasma nitrocarburized and oxidized AISI 1020 steels

Koo Hyun Lee, Ki Suk Nam, Youl Min Park, Pyung Woo Shin, Deuk Yong Lee, Yo-Seung Song

Publisher page

Abstract

Plasma nitrocarburized AISI 1020 steels were oxidized for 15, 30 and 60 min to evaluate their corrosion and microstructural properties. After plasma nitrocarburizing for 3 h at 570°C in a gas mixture comprising 85 vol.% N2, 12vol.% H2 and 3 vol.% CH4, the compound layer composed of ɛ-Fe2–3(N,C) and γ’-Fe4(N,C) phases and the diffusion layer above the matrix were observed. The top oxide layer, consisting mainly of magnetite (Fe2O4) and hematite (Fe2O3) phases, forms after post-oxidation treatment at 500°C. However, the oxide layer was severely degraded by spallation as a result of increases in post-oxidizing time. The difference in corrosion resistance should be attributed to the thickness of the top oxide layer, which was governed by post-oxidizing time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Material Properties and Applications · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. T. Bell,Heat Treat. Met. 2, 39 (1975).
2. R. H. Jutte, B. J. Kooi, M. A. J. Somers, and E. J. Mittemeijer,Oxid. Met. 48, 87 (1997).10.1007/BF01675263 ↗
3. S. Li and R. R. Manory,Metall. Mater. Trans. A 27, 135 (1996).10.1007/BF02647754 ↗
4. M. A. J. Somers and E. J. Mittemeijer,Surf. Eng. 3, 123 (1987).10.1179/sur.1987.3.2.123 ↗
5. D. L. Cocke, M. Jurcik-Rajman, and S. Veprek,J. Electrochem. Soc. 136, 3655 (1989).10.1149/1.2096526 ↗
6. S. Li and R. R. Manory,J. Mater. Sci. 34, 1045 (1999).10.1023/A:1004548112547 ↗
7. S. Hoppe,Surf. Coat. Tech. 98, 1199 (1998).10.1016/S0257-8972(97)00548-3 ↗
8. C. Alves, Jr., J. A. Rodrigues, and A. E. Martinelli,Surf. Coat. Tech. 122, 122 (1999).10.1016/S0257-8972(99)00326-6 ↗
9. J. Slycke and L. Sproge,Surf. Eng. 5, 125 (1989).10.1179/sur.1989.5.2.125 ↗
10. A. Celik and S. Karadeniz,Surf. Coat. Tech. 80, 283 (1996).10.1016/0257-8972(95)02471-9 ↗
11. H. S. Cho,Ph. D Thesis, University of Birmingham (1998).