journal article·2010-08

Equivalent drawbead models for sheet forming simulation

S. J. Moon, M. G. Lee, S. H. Lee, Y. T. Keum

Publisher page

Abstract

Equivalent drawbead models associated with drawbead types, with which the geometrical modeling of drawbeads can be replaced in a numerical simulation of the stamping process, are introduced. The accuracy of the equivalent drawbead models rapidly computing the drawbead restraining and opening forces, based on the hybrid membrane/bending method accommodating Barlat’s anisotropic yield function for the plane stress state and the modified Chaboche model considering the Bauschinger effect and transient behavior under the plane strain condition, is verified by comparing the equivalent drawbead forces with those obtained from the finite element simulation. Moreover, the drawbead forces computed by equivalent drawbead models are employed in a finite element simulation of the automotive fender stamping process, from which the effectiveness and applicability of equivalent drawbead models are observed by comparing strains and draw-ins with those measured in the tryout panel.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. H. D. Nine, Mechanics of Sheet Metal Forming (eds., Z. Marciniak, J. L. Duncan, and S. J. Hu), p. 179–211, Butterworth-Heinemann, London (1978).10.1007/978-1-4613-2880-3_8 ↗
2. H. D. Nine, American Society for Metals 2, 185 (1982).
3. N. M. Wang, J. Appl. Met. Work. 2, 193 (1982).10.1007/BF02834037 ↗
4. B. S. Levy, J. Appl. Met. Work. 3, 38 (1983).10.1007/BF02833875 ↗
5. N. Triantafyllidis, B. Maker, and S. K. Samanta, J. Eng. Mater. T. 108, 321 (1986).10.1115/1.3225889 ↗
6. N. Triantafyllidis, G. Grab, B. Maker, and S. K. Samanta, J. Eng. Mater. Tech. 109, 164 (1987).10.1115/1.3225957 ↗
7. T. B. Stoughton, Proc. 15th IDDRG (ed., S. P. Keeler), p. 205–215, International Deep Drawing Research Group, Toronto (1988).
8. B. D. Carleer, T. Meingers, and H. Huetink, Proc. Numerical Simulations of 3D Sheet Metal Forming Processes (NUMISHEET’ 96) (eds., J. K. Lee, G. L. Kinzel, and R. H. Wagoner), p. 25–31, The Ohio State University, Ohio (1996).
9. Y. You, P. Y. Hong, and R. X. Yu, Proc. Simulation of Material Processing: Theory, Method and Applications (NUMIFORM’ 98) (eds., J. Huetink, and F.P.T. Baaijens), p. 905–910, A. A. Balkema, Rotterdam (1998).
10. M. Meinders, H. J. M. Geijselaers, and J. Huetink, Proc. Simulation of Material Processing: Theory, Methods and Applications (NUMIFORM’98) (eds., J. Huetink, and F.P.T. Baaijens), p. 911–916, A. A. Balkema, Rotterdam (1998).
11. K. Chung, M. G. Lee, D. Kim, C. Kim, M. L. Wenner, and F. Barlat, Int. J. Plasticity 21, 861 (2005).
12. M. G. Lee, K. Chung, R. H. Wagoner, and Y. T. Keum, Int. J. Solids Struct. 45, 3375 (2008).10.1016/j.ijsolstr.2008.02.008 ↗
13. Y. T. Keum, B. Y. Ghoo, and J. H. Kim, J. Mater. Process. Tech. 111, 155 (2001).10.1016/S0924-0136(01)00501-5 ↗
14. Y. T. Keum, J. H. Kim, and B. Y. Ghoo, Int. J. Solids Struct. 38, 5335 (2001).10.1016/S0020-7683(00)00342-5 ↗
15. S. J. Moon, Y. T. Keum, and R. H. Wagoner, Trans. Mater. Process. 16, 457 (2007).10.5228/KSPP.2007.16.6.457 ↗
16. S. J. Moon, M. G. Lee, and Y. T. Keum, Trans. Mater. Process. 17, 511 (2008).10.5228/KSPP.2008.17.7.511 ↗
17. W. Prager, J. Appl. Mech. ASME 65, 671 (1956).
18. H. Ziegler, Quart. Appl. Math. 17, 55 (1959).10.1090/qam/104405 ↗
19. J. L. Chaboche, Int. J. Plasticity 2, 149 (1986).10.1016/0749-6419(86)90010-0 ↗
20. M. G. Lee, H. Ryou, C. Kim, and K. Chung, Met. Mater. Int. 14, 21 (2008).10.3365/met.mat.2008.02.021 ↗
21. F. Barlat, J. C. Brem, J. W. Chung, R. E. Dick, S. H. Choi, F. Pouboghrat, E. Chu, and D. J. Lege, Int. J. Plasticity 19, 1297 (2003).10.1016/S0749-6419(02)00019-0 ↗
22. S. J. Moon, MS Thesis, p. 18–25, Hanyang University, Seoul (2009).
23. George E. Dieter, Mechanical Metallurgy 3 rd, p. 659–662, McGraw-Hill, New York (1986).
24. Y. T. Keum, J. W. Shim, and R. H. Wagoner, Proc. 9 th International Conference on Technology of Plasticity (eds. D. Y. Yang), p.279–280, The Korean Society For Technology of Plasticity, Korea (2008).