journal article·2015-05

Development of a numerical model to predict areas of plume eye of ladle furnace process

Hyung-jung Lee, Kyung-woo Yi

Publisher page

Abstract

The effects of operating parameters on the behavior of plume eye area were investigated with a numerical simulation model and water model experiments for ladle furnace process. The concept of total energy equivalence at the interface of slag and melt was adopted in the model for predicting the position of the slag/melt boundary of plume eye. The predicted results of plume eye area were well matched with water model experiments of wide range of gas flow (0.5 l/min~10 l/min) and other researchers’ results with various design of ladle of water model experiments and field operations. Numerical simulation and water model experiments also showed that fluid flow in the ladle was changed by increasing gas flow rates and the shape of flow patterns was strongly affected by the size of plume eye. By parametric study using simulation results and water model experiments, it was found that plume eye area is proportional to the square root of gas flow rate and is inversely proportional to the square root of initial slag height when the other parameters were keep constants.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Iron and Steelmaking Processes · Radiative Heat Transfer Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. E.-Y. Ko, J. Choi, J.-Y. Park, and I. Sohn, Met. Mater. Int. 20, 141 (2014).10.1007/s12540-014-1017-x ↗
2. A. S. Foundation, The Making, Shaping, and Treating of Steel: Ironmaking volume, p.140, Aise Steel Foundation (1999).
3. J.-Y. Park, E.-Y. Ko, J. Choi, and I. Sohn, Met. Mater. Int. 20, 1103 (2014).10.1007/s12540-014-6013-7 ↗
4. J. H. Kim, S. H. Hong, S. W. Joo, J. W. Shin, D. H. Kim, H. S. Choi, C. S. Ha, and B. D. You, Korean J. Met. Mater. 52, 909 (2014).10.3365/KJMM.2014.52.11.909 ↗
5. L. Zhang and B. G. Thomas, ISIJ int. 43, 271 (2003).10.2355/isijinternational.43.271 ↗
6. K. Yonezawa and K. Schwerdtfeger, Metall. Trans. B 30, 411 (1999).10.1007/s11663-999-0073-y ↗
7. G. Subagyo, ISIJ Int. 43, 262 (2003).10.2355/isijinternational.43.262 ↗
8. D. Mazumdar and J. Evans, Metall. Trans. B 35, 400 (2004).10.1007/s11663-004-0041-5 ↗
9. K. Krishnapisharody and G. A. Irons, Metall. Trans. B 37, 763 (2006).10.1007/s11663-006-0058-z ↗
10. K. Krishnapisharody and G. Irons, Metall. Trans. B 38, 367 (2007).10.1007/s11663-007-9024-7 ↗
11. N. Maruoka, F. Lazuardi, T. Maeyama, S.-J. Kim, A. N. Conejo, H. Shibata, and S.-Y. Kitamura, ISIJ Int. 51, 236 (2011).10.2355/isijinternational.51.236 ↗
12. H. J. Whan, H. S. Hwan, K. D. Heun, Y. B. Don, P. J. Jin, and S. H. Suk, ISIJ Int. 41, 1165 (2001).10.2355/isijinternational.41.1165 ↗
13. B. Li, H. Yin, C. Q. Zhou, and F. Tsukihashi, ISIJ Int. 48, 1704 (2008).10.2355/isijinternational.48.1704 ↗
14. Y.-H. Liu, Z. He, and L.-P. Pan, Adv. Mech. Eng. 2014 (2014).
15. D. Mazumdar and R. I. Guthrie, ISIJ Int. 35, 1 (1995).10.2355/isijinternational.35.1 ↗
16. D. Mazumdar and R. I. Guthrie, Metall. Trans. B 17, 725 (1986).10.1007/BF02657134 ↗
17. K. Yonezawa and K. Schwerdtfeger, Metall. Trans. B 31, 461 (2000).10.1007/s11663-000-0152-6 ↗
18. B. Launder and D. Spalding, Mathematical Models of Turbulence, p.90, Academic Press, New York (1980).
19. S. V. Patankar, Numerical Heat Transfer and Fluid Flow, p.113, Taylor & Francis (1980).
20. G. B. Wallis, One-dimensional Two-phase Flow, p.89, McGraw- Hill New York (1969).
21. M. Iguchi, H. Kawabata, K. Nakajima, and Z.-I. Morita, Metall. Trans. B 26, 67 (1995).10.1007/BF02648978 ↗
22. V. G. Levich and D. B. Spalding, Physicochemical Hydrodynamics, p.451, Prentice-Hall Englewood Cliffs, NJ (1962).
23. M. A. Castello-Branco and K. Schwerdtfeger, Metall. Trans. B 25, 359 (1994).10.1007/BF02663385 ↗
24. S. Joo and R. Guthrie, Metall. Trans. B 23, 765 (1992).10.1007/BF02656455 ↗