journal article·2011-04

Properties and rapid consolidation of nanostructured NiTi by pulsed current activated sintering

Wonbaek Kim, Na-Ri Kim, In-Yong Ko, Sung-Wook Cho, Je-Shin Park, In-Jin Shon

Publisher page

Abstract

Highly dense nanostructured TiNi with a relative density of up to 99 % was obtained within two minutes by pulsed current activated sintering under a pressure of 80 MPa. The advantage of this process is that it allows very quick densification to near theoretical density and prohibits grain growth in nano-structured materials. The microstructural and mechanical properties of the dense TiNi produced by PCAS were investigated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Advanced materials and composites · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. K. Otsuka and X. Ren, Prog. Mater. Sci. 50, 511 (2005).10.1016/j.pmatsci.2004.10.001 ↗
2. D. K. Kennedy, F. K. Straub, L. Mc D. Schetky, Z. Chaudhry, R. Roznoy, J. Intel. Mat. Syst. Str. 15, 235 (2004).10.1177/1045389X04042794 ↗
3. S. Saadat, J. Salichs, M. Noori, Z. Hou, H. Davoodi, I. Baron, Y. Suzuki, and A. Masuda, Smart Mater. Struct. 11, 218 (2002).10.1088/0964-1726/11/2/305 ↗
4. T. Duerig, A. Pelton, and D. Stockel, Mater. Sci. Eng. A 273–275, 149 (1999).10.1016/S0921-5093(99)00294-4 ↗
5. H. Gleiter, Nanostruct. Mater. 6, 3 (1995).10.1016/0965-9773(95)00025-9 ↗
6. J. Karch, R. Birringer, and H. Gleiter, Nature 330, 556 (1987).10.1038/330556a0 ↗
7. A. M. George, J. Iniguez, and L. Bellaiche, Nature 413, 54 (2001).10.1038/35092530 ↗
8. D. Hreniak and W. Strek, J. Alloy. Compd. 341, 183 (2002).10.1016/S0925-8388(02)00067-1 ↗
9. C. Xu, J. Tamaki, N. Miura, and N. Yamazo, Sensor. Actuat. B 32, 147 (1991).10.1016/0925-4005(91)80207-Z ↗
10. D. G. Lamas, A. Caneiro, D. Niebieskikwiat, R. D. Sanchez, D. Garcia, and B. Alascio, J. Magn. Magn. Mater. 241, 207 (2002).10.1016/S0304-8853(02)00006-9 ↗
11. E. S. Ahn, N. J. Gleason, A. Nakahira, and J. Y. Ying, Nano Lett. 1, 149 (2001).10.1021/nl0055299 ↗
12. Z. Fang and J. W. Eason, Int. J. Refract. Met. H. Mater. 13, 297 (1995).10.1016/0263-4368(95)92675-A ↗
13. I. J. Shon, D. K. Kim, K. T. Lee, and K. S. Nam, Met. Mater. Int. 14, 593 (2008).10.3365/met.mat.2008.10.593 ↗
14. M. Sommer, W. D. Schubert, E. Zobetz, and P. Warbichler, Int. J. Refract. Met. H. Mater. 20, 41 (2002).10.1016/S0263-4368(01)00069-5 ↗
15. D. M. Lee, K. M. Jo, and I. J. Shon, J. Kor. Inst. Met. & Mater. 47, 344 (2009).
16. H. C. Kim, D. Y. Oh, J. Guojian, and I. J. Shon, Mater. Sci. Eng. A 368, 10 (2004).10.1016/j.msea.2003.08.105 ↗
17. H. C. Kim, D. Y. Oh, and I. J. Shon, Int. J. Refract. Met. H. Mater. 22, 197 (2004).10.1016/j.ijrmhm.2004.06.006 ↗
18. D. Y. Oh, H. C. Kim, J. K. Yoon, I. J. Shon, J. Alloy. Compd. 386, (2005).
19. I. J. Shon, S. C. Kim, B. S. Lee, and B. R. Kim, Electron. Mater. Lett. 5, 19 (2009).10.3365/eml.2009.03.019 ↗
20. C. Suryanarayana and M. Grant Norton, X-ray Diffraction a Practical Approach, Plenum Press, New York (1998).10.1007/978-1-4899-0148-4 ↗
21. G. R. Anstis, P. Chantikul, B. R. Lawn, and D. B. Marshall, J. Am. Ceram. Soc. 64, 533 (1981).10.1111/j.1151-2916.1981.tb10320.x ↗
22. D. Y. Li, Wear 221, 116 (1988).10.1016/S0043-1648(98)00269-5 ↗
23. Z. Shen, M. Johnsson, Z. Zhao, and M. Nygren, J. Am. Ceram. Soc. 85, 1921 (2002).10.1111/j.1151-2916.2002.tb00381.x ↗
24. J. E. Garay, U. Anselmi-tamburini, Z. A. Munir, S. C. Glade, and P. Asoka-kumar, Appl. Phys. Lett. 85, 573 (2004).10.1063/1.1774268 ↗
25. J. R. Friedman, J. E. Garay, U. Anselmi-tamburini, and Z. A. Munir, Intermetallics 12, 589 (2004).10.1016/j.intermet.2004.02.005 ↗
26. J. E. Garay, U. Anselmi-tamburini, and Z. A. Munir, Acta mater. 51, 4487 (2003).10.1016/S1359-6454(03)00284-2 ↗