journal article·2015-01

Enhancement of the in-plane shear properties of carbon fiber composites containing carbon nanotube mats

Hansang Kim

Publisher page

Abstract

The in-plane shear property of carbon fiber laminates is one of the most important structural features of aerospace and marine structures. Fiber-matrix debonding caused by in-plane shear loading is the major failure mode of carbon fiber composites because of the stress concentration at the interfaces. In this study, carbon nanotube mats (CNT mat) were incorporated in two different types of carbon fiber composites. For the case of woven fabric composites, mechanical interlocking between the CNTs and the carbon fibers increased resistance to shear failure. However, not much improvement was observed for the prepreg composites as a result of incorporation of the CNT mats. The reinforcement mechanism of the CNT mat layer was investigated by a fractographic study using scanning electron microscopy. In addition, the CNT mat was functionalized by three different methods and the effectiveness of the functionalization methods was determined and the most appropriate functionalization method for the CNT mat was air oxidation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Carbon Nanotubes in Composites · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. I. M. Daniel and O. Ishai, Engineering Mechanics of Composite Materials, pp.100–106, Oxford University Press, New York (1994).
2. E. Totry, J. M. Molina-Aldareguía, C. González, and J. L. Lorca, COMPOS. SCI. TECHNOL. 70, 970 (2010).10.1016/j.compscitech.2010.02.014 ↗
3. J. N. Coleman, U. Khan, W. J. Blau, and Y. K. Gun’ko, CARBON 44, 1624 (2006).10.1016/j.carbon.2006.02.038 ↗
4. P. C. Ma, N. A. Siddiqui, G. Marom, and J. K. Kim, Compos. Part A-Appl. S. 41, 1345 (2010)10.1016/j.compositesa.2010.07.003 ↗
5. Z. Spitalsky, D. Tasis, K. Papagelis, C. Galiotis, Prog. Polym. Sci. 35, 357 (2010).10.1016/j.progpolymsci.2009.09.003 ↗
6. H. S. Kim, Met. Mater. Int. 17, 697 (2011).10.1007/s12540-011-1001-7 ↗
7. P. D. Bradford, X. Wang, H. Zhao, J. P. Maria, Q. Jia, and Y. T. Zhu, Compos. Sci. Technol. 70, 1980 (2010).10.1016/j.compscitech.2010.07.020 ↗
8. Z. Spitalsky, G. Tsoukleri, D. Tasis, C. Krontiras, S. N. Georga, and C. Galiotis, Nanotechnology 20, 405702 (2009).10.1088/0957-4484/20/40/405702 ↗
9. Q. F. Cheng, J. P. Wang, J. J. Wen, C. H. Liu, K. L. Jiang, Q. Q. Li, and S. S. Fan, Carbon 48, 260 (2010).10.1016/j.carbon.2009.09.014 ↗
10. C. Fernández, C. Medina, G. Pincheira, C. Canales, and P. Flores, Compos. Part B: Eng. 55, 421 (2013).10.1016/j.compositesb.2013.07.010 ↗
11. J. Cho, J. Y. Chen, and I. M. Daniel, Scripta Mater. 56, 685 (2007).10.1016/j.scriptamat.2006.12.038 ↗
12. H. S. Kim and H. T. Hahn, AIAA J. 47, 2779 (2009).10.2514/1.39522 ↗
13. H. S. Kim and H. T. Hahn, J. Compos. Mater. 45, 1109 (2011).10.1177/0021998311402726 ↗
14. S. U. Khan and J. K. Kim, Carbon 50, 5265 (2012).10.1016/j.carbon.2012.07.011 ↗
15. T. Saotome, H. S. Kim, D. Lashmore, and H. T. Hahn, Bull. Mater. Sci. 34, 615 (2011).10.1007/s12034-011-0007-6 ↗
16. T. Saotome, H. S. Kim, Z. Wang, D. Lashmore, and H. T. Hahn, Bull. Mater. Sci. 34, 623 (2011).10.1007/s12034-011-0172-7 ↗
17. Y. B. Park, K. H. Nguyen, J. H. Kweon, J. H. Choi, and J. S. Han, Int’l J. of Aeronautical & Space Sci. 12, 84 (2011).10.5139/IJASS.2011.12.1.84 ↗
18. ASTM standard D3518/D3518M, Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate, ASTM International, West Conshohocken, PA (2006).
19. Y. Liang, H. Wang, and X. Gu, Polym. Test. 32, 594 (2013).10.1016/j.polymertesting.2013.01.015 ↗
20. C. Thomsen and S. Reich, Phys. Rev. Lett. 85, 5214 (2000).10.1103/PhysRevLett.85.5214 ↗