journal article·2017-07

Improving significantly the failure strain and work hardening response of LPSO-strengthened Mg-Y-Zn-Al alloy via hot extrusion speed control

Xinghe Tan, Winston Chee, Jimmy Chan, Richard Kwok, Manoj Gupta

Publisher page

Abstract

The effect of hot extrusion speed on the microstructure and mechanical properties of MgY1.06Zn0.76Al0.42 (at%) alloy strengthened by the novel long-period stacking ordered (LPSO) phase was systematically investigated. Increase in the speed of extrusion accelerated dynamic recrystallization of α-Mg via particle-stimulated nucleation and grain growth in the alloy. The intensive recrystallization and grain growth events weakened the conventional basal texture and Hall-Petch strengthening in the alloy which led to significant improvement in its failure strain from 4.9% to 19.6%. The critical strengthening contribution from LPSO phase known for attributing high strength to the alloy was observed to be greatly undermined by the parallel competition from texture weakening and the adverse Hall-Petch effect when the alloy was extruded at higher speed. Absence of work hardening interestingly observed in the alloy extruded at lower speed was discussed in terms of its ultra-fine grained microstructure which promoted the condition of steady-state defect density in the alloy; where dislocation annihilation balances out the generation of new dislocations during plastic deformation. One approach to improve work hardening response of the alloy to prevent unstable deformation and abrupt failure in service is to increase the grain diameter in the alloy by judiciously increasing the extrusion speed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. SAE Standard AIR 6160, Magnesium Alloys in Aircraft Seats-Developments in Magnesium Alloy Flammability Testing, SAE International, USA (2014).
2. SAE Standard AS8049B, Performance Standard for Seats in Civil Rotorcraft, Transport Aircraft, and General Aviation Aircraft, SAE International, USA (2005).
3. FAA, Oil Burner Flammability Test for Magnesium Alloy Seat Structure, https://www.fire.tc.faa.gov/pdf/handbook/00-12_ch25.pdf (accessed June 14, 2016).
4. F. Czerwinski, Corros. Sci. 86, 1 (2014).10.1016/j.corsci.2014.04.047 ↗
5. A. Stachel, Light Weight Alloys in Seat Design, Influence of Magnesium in Seats, https://www.fire.tc.faa.gov/2010Conference/files/Magnesium_Use_In_Aircraft/StachelSeatDesigns/StachelSeatDesignPres. pdf (accessed June 14, 2016).
6. T. XingHe, W. C. K. How, J. C. K. Weng, R. K. W. Onn, and M. Gupta, Mater. Design 83, 443 (2015).10.1016/j.matdes.2015.06.041 ↗
7. J. Kim and Y. Kawamura, Mat. Sci. Eng. A 573, 62 (2013).10.1016/j.msea.2012.12.087 ↗
8. F. Lu, A. Ma, J. Jiang, D. Yang, and Q. Zhou, Rare Metals 31, 303 (2012).10.1007/s12598-012-0510-y ↗
9. Y. Kawamura and M. Yamasaki, Mater. T. JIM 48, 2986 (2007).10.2320/matertrans.MER2007142 ↗
10. S. Yoshimoto, M. Yamasaki, and Y. Kawamura, Mater. T. JIM 47, 959 (2006).10.2320/matertrans.47.959 ↗
11. M. Hirano, M. Yamasaki, K. Hagihara, K. Higashida, and Y. Kawamura, Mater. T. JIM 51, 1640 (2010).10.2320/matertrans.MAW201026 ↗
12. Y. M. Zhu, A. J. Morton, and J. F. Nie, Acta Mater. 58, 2936 (2010).10.1016/j.actamat.2010.01.022 ↗
13. E. Oñorbe, G. Garcés, P. Pérez, and P. Adeva, J. Mater. Sci. 47, 1085 (2011).10.1007/s10853-011-5899-4 ↗
14. J. Gröbner, A. Kozlov, X.-Y. Fang, J. Geng, J. Nie, and R. Schmid-Fetzer, Acta Mater. 60, 5948 (2012).10.1016/j.actamat.2012.05.035 ↗
15. X. Tan, K. H. W. Chee, K. W. J. Chan, W. O. R. Kwok, and M. Gupta, Mat. Sci. Eng. A 644, 405 (2015).10.1016/j.msea.2015.07.079 ↗
16. X. Tan, W. K. H. Chee, J. K. W. Chan, R. W. O. Kwok, and M. Gupta, J. Mater. Sci. 51, 4160 (2016).10.1007/s10853-016-9742-9 ↗
17. E. Ball and P. Prangnell, Scripta Metall. Mater. 31, 111 (1994).10.1016/0956-716X(94)90159-7 ↗
18. L. B. Tong, X. H. Li, and H. J. Zhang, Mat. Sci. Eng. A 563, 177 (2013).10.1016/j.msea.2012.10.088 ↗
19. H. Liu, J. Bai, K. Yan, J. Yan, A. Ma, and J. Jiang, Mater. Design 93, 9 (2016).10.1016/j.matdes.2015.12.151 ↗
20. R. Li, J. Nie, G. Huang, Y. Xin, and Q. Liu, Scripta Mater. 64, 950 (2011).10.1016/j.scriptamat.2011.01.042 ↗
21. L. Tong, X. Li, D. Zhang, L. Cheng, J. Meng, and H. Zhang, Mater. Charact. 92, 77 (2014).10.1016/j.matchar.2014.03.006 ↗
22. G. K. Meenashisundaram and M. Gupta, Mat. Sci. Eng. A 627, 306 (2015).10.1016/j.msea.2015.01.007 ↗
23. M. K. Habibi, S. P. Joshi, and M. Gupta, Acta Mater. 58, 6104 (2010).10.1016/j.actamat.2010.07.028 ↗
24. J. Wang, P. Song, S. Huang, and F. Pan, Mater. Lett. 93, 415 (2013).10.1016/j.matlet.2012.11.076 ↗
25. E. Oñorbe, G. Garcés, F. Dobes, P. Pérez, and P. Adeva, Metall. Mater. Trans. A 44, 2869 (2013).10.1007/s11661-013-1628-8 ↗
26. É._F. Prados, V. L. Sordi, and M. Ferrante, Mat. Res. 11, 199 (2008).10.1590/S1516-14392008000200015 ↗
27. Y. Wang and E. Ma, Mat. Sci. Eng. A 375, 46 (2004).10.1016/j.msea.2003.10.214 ↗