journal article·2016-05Open access

Solution electrospinning of polypropylene-based fibers and their application in catalysis

Emine Berber, Nesrin Horzum, Baki Hazer, Mustafa M. Demir

Fibers and Polymers· Volume 17· Issue 5

Abstract

Since the dissolution of polyolefins is a chronic problem, melt processing has been tacitly accepted as an obligation. In this work, polypropylene (PP) was modified on molecular level incorporating poly(ethylene glycol) (PEG) as graft segment (PP-g-PEG) in a range of 6 to 9 mol%. Gold nanoparticles were nucleated in the presence of the copolymer chains via redox reaction. The dissolution of the amphiphilic comb-type graft copolymers containing gold nanoparticles (80 nm in diameter) was achieved in toluene and successfully electrospun from its solution. The diameter of composite fibers was in the range from 0.3 to 2.5 μm. The design of the structurally organized copolymer fiber mats provided a support medium for the nanoparticles enhancing the active surface area for the catalytic applications. The resulting composite fibers exhibited rapid catalytic reduction of methylene blue (MB) dye in the presence of sodium borohydride (NaBH4) compared to corresponding composite cast film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Supercapacitor Materials and Fabrication · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. D. H. Reneker and I. Chun, Nanotechnol., 7, 216 (1996).10.1088/0957-4484/7/3/009 ↗
2. S. Agarwal, J. H. Wendorff, and A. Greiner, Macromol. Rapid Commun., 31, 1317 (2010).10.1002/marc.201000021 ↗
3. L. Larrondo and R. S. J. Manley, J. Polym. Sci. Pt. BPolym. Phys., 19, 909 (1981).10.1002/pol.1981.180190601 ↗
4. A. Noumowe, Cem. Concr. Res., 35, 2192 (2005).10.1016/j.cemconres.2005.03.007 ↗
5. J. Doshi and D. H. Reneker, J. Electrost., 35, 151 (1995).10.1016/0304-3886(95)00041-8 ↗
6. L. Larrondo and R. S. J. Manley, J. Polym. Sci. Pt. BPolym. Phys., 19, 921 (1981).10.1002/pol.1981.180190602 ↗
7. L. Larrondo and R. S. J. Manley, J. Polym. Sci. Pt. BPolym. Phys., 19, 933 (1981).10.1002/pol.1981.180190603 ↗
8. S. R. Givens, Macromol., 40, 608 (2007).10.1021/ma062398a ↗
9. K. H. Lee, Macromol., 42, 5215 (2009).10.1021/ma9006472 ↗
10. D. M. Rein, J. Polym. Sci. Pt. B-Polym. Phys., 45, 766 (2007).10.1002/polb.21122 ↗
11. A. J. van Reenen and L. Keulder, Macromol. Mater. Eng., 295, 666 (2010).10.1002/mame.200900419 ↗
12. N. Horzum, R. Munoz-Espi, G. Glasser, M. M. Demir, K. Landfester, and D. Crespy, ACS Appl. Mater. Interfaces, 4, 6338 (2012).10.1021/am301969w ↗
13. M. M. Demir, M. A. Gulgun, Y. Z. Menceloglu, B. Erman, S. S. Abramchuk, E. E. Makhaeva, A. R. Khokhlov, V. G. Matveeva, and M. G. Sulman, Macromol., 37, 1787 (2004).10.1021/ma035163x ↗
14. D. Khushalani, S. Hasenzahl, and S. Mann, J. Nanosci. Nanotechnol., 1, 129 (2001).10.1166/jnn.2001.030 ↗
15. J. Y. Ying, C. P. Mehnert, and M. S. Wong, Angew. Chem., Int. Ed., 38, 56 (1999).10.1002/(SICI)1521-3773(19990115)38:1/2<56::AID-ANIE56>3.0.CO;2-E ↗
16. L. M. Bronstein, S. Polarz, B. Smarsly, and M. Antonietti, Adv. Mater., 13, 1333 (2001).10.1002/1521-4095(200109)13:17<1333::AID-ADMA1333>3.0.CO;2-P ↗
17. M. Epifani, C. Giannini, L. Tapfer, and L. Vasanelli, J. Am. Ceram Soc., 83, 2385 (2000).10.1111/j.1151-2916.2000.tb01566.x ↗
18. K. Chakrabarti and C. M. Whang, Mater. Sci. Eng., 88, 26 (2002).10.1016/S0921-5107(01)00908-4 ↗
19. M. P. Zheng, M. Y. Gu, Y. P. Jin, and G. L. Jin, Mater. Res. Bull., 36, 853 (2001).10.1016/S0025-5408(01)00525-6 ↗
20. S. Bharathi, M. Nogami, and S. Ikeda, Langmuir, 17, 7468 (2001).10.1021/la011053c ↗
21. L. Y. Li, X. B. Cao, F. Yu, Z. Y. Yao, and Y. Xie, J. Colloid Interface Sci., 261, 366 (2003).10.1016/S0021-9797(03)00122-X ↗
22. Y. Matatov-Meytal and M. Sheintuch, Appl. Catal. A-Gen., 231, 1 (2002).10.1016/S0926-860X(01)00963-2 ↗
23. M. Balci, A. Alli, B. Hazer, O. Guven, K. Cavicchi, and M. Cakmak, Polym. Bull., 64, 691 (2010).10.1007/s00289-009-0211-3 ↗
24. O. A. Kalayci, F. B. Coemert, B. Hazer, T. Atalay, K. A. Cavicchi, and M. Cakmak, Polym. Bull., 65, 215 (2010).10.1007/s00289-009-0196-y ↗
25. D. B. Hazer, B. Hazer, and N. Dincer, Biomed. Biotechnol., 2011, 1 (2011).10.1155/2011/956169 ↗
26. D. B. Hazer, M. Mut, N. Dincer, Z. Saribas, B. Hazer, and T. Ozgen, Childs Nerv. Syst., 28, 839 (2012).10.1007/s00381-012-1729-5 ↗
27. O. A. Kalayci, O. Duygulu, and B. Hazer, J. Nanopart. Res., 15, 1 (2013).10.1007/s11051-012-1355-x ↗
28. M. S. Kilic, S. Korkut, B. Hazer, and E. Erhan, Biosens. Bioelectron., 61, 500 (2014).10.1016/j.bios.2014.05.068 ↗
29. M. R. Bockstaller, R. A. Mickiewicz, and E. L. Thomas, Adv. Mater., 17, 1331 (2005).10.1002/adma.200500167 ↗
30. S. Tuzuner and M. M. Demir, Mater. Chem. Phys., 162, 692 (2015).10.1016/j.matchemphys.2015.06.044 ↗
31. C. Saldías, Á. Leiva, S. Bonardd, C. Quezada, S. Saldías, M. Pino, and D. Radic, React. Funct. Polym., 96, 78 (2015).10.1016/j.reactfunctpolym.2015.09.010 ↗
32. A. M. El-Rafei, Ceram. Int. B., 41, 12065 (2015).10.1016/j.ceramint.2015.06.022 ↗
33. M. M. Demir, G. Ugur, M. A. Gulgun, and Y. Z. Menceloglu, Macromol. Chem. Phys., 209, 508 (2008).10.1002/macp.200700544 ↗