Comparision of the properties of UV-cured polyurethane acrylates containing different diisocyanates and low molecular weight diols
Source abstract
Abstract
UV-curable polyurethane acrylate prepolymers were prepared from diisocyanates [isophorone diisocyanate (IPDI), 2,4-toluene diisocyanate (TDI), or 4,4′-dicyclohexylmethane diisocyanate (H12MDI)], diols [ethylene glycol (EG), 1,4-butane diol (BD), or 1,6-hexane diol (HD)], polypropylene glycol as a polyol. UV-curable mixtures were formulated from the prepolymer (90 wt%), reactive diluent monomer trimethylol propane triacrylate (10 wt%), and photoinitiator 1-hydroxycyclohexyl ketone (3 wt% based on prepolymer/diluent). The effects of different diisocyanates/low molecular weigh diol on the dynamic mechanical thermal properties and elastic recovery of UV-cured polyurethane acrylate films were examined. The tensile storage modulus increased a little in the order of EG>BD>HD at the same diisocyanate. Two loss modulus peaks for all samples are observed owing to the glass transition of soft segments (T gs ) and the glass transition temperature of hard segments (T gh ). For the same diisocyanate,T gs decreased, however,T gh increased, in the order of HD>BD>EG. The elastic recovery also increased in the order of HD>BD>EG at the same diisocyanate. In case of same diols,T gh increased in the order of H12MDI>TDI>IPDI significantly. The ultimate elongation and elastic recovery increased in the order of TDI>IPDI>H12MDI at the same diol.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photopolymerization techniques and applications · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. T. A. Speckhard, K. K. S. Hwang, S. B. Lin, S. Y. Tsay, M. Koshiba, Y. S. Ding, and S. L. Cooper,J. Appl. Polym. Sci.,30, 647 (1985).10.1002/app.1985.070300215 ↗
2. H. D. Kim and T. W. Kim,J. Appl. Polym. Sci.,67, 2153 (1998).10.1002/(SICI)1097-4628(19980328)67:13<2153::AID-APP5>3.0.CO;2-D ↗
3. H. B. Kim, S. G. Kang, and C. S. Ha,J. Appl. Polym. Sci.,42, 1339 (1992).10.1002/app.1992.070460803 ↗
4. B. K. Kim and K. H. Kim,J. Appl. Polym. Sci.,60, 799 (1996).10.1002/(SICI)1097-4628(19960509)60:6<799::AID-APP2>3.0.CO;2-E ↗
5. B. Nabeth, J. F. Gerard, and J. P. Pascault,J. Appl. Polym. Sci.,60, 2113 (1996).10.1002/(SICI)1097-4628(19960620)60:12<2113::AID-APP8>3.0.CO;2-P ↗
6. C. Decker and K. Zahouily,Polymer Degradation and Stability,64, 293 (1999).10.1016/S0141-3910(98)00205-5 ↗
7. S. Velankar, J. Pazos, and S. L. Cooper,J. Appl. Polym. Sci.,62, 1361 (1996).10.1002/(SICI)1097-4628(19961128)62:9<1361::AID-APP6>3.0.CO;2-F ↗
8. S. B. Lin, S. Y. Tsay, T. A. Speckhard, K. K. S. Hwang, J. J. Jezerc, and S. L. Cooper,Chem. Eng. Commun.,30, 251 (1984).10.1080/00986448408911131 ↗
9. M. Koshiba, K. K. S. Hwang, S. K. Foley, and D. J. Yarusso,J. Mater. Sci.,17, 1447 (1982).10.1007/BF00752259 ↗
10. Y. C. Lai and L. Baccei,J. Appl. Polym. Sci.,42, 2039 (1991).10.1002/app.1991.070420731 ↗
11. T. L. Wang and F. J. Huang,Polymer,41, 5219 (2000).10.1016/S0032-3861(99)00731-4 ↗
12. D. J. Lee, J. Y. Choi, and H. D. Kim,J. Korean Fiber Soc.,36, 798 (1999).
13. M. Debowski and A. Balas,Eur. Polym. J.,36, 601 (2000).10.1016/S0014-3057(99)00095-6 ↗
14. M. Szycher, “Szycher’s Handbook of Polyurethanes”, Chap. 16, CRC Press, 2000.10.1201/9781482273984 ↗
15. M. Szycher, “Szycher’s Handbook of Polyurethanes”, Chap. 11, CRC Press, 2000.10.1201/9781482273984 ↗
16. J. Chen, J. P. Pascault, and M. Taha,J. Polym. Sci., Part A, Poly. Chem.,34, 2889 (1996).10.1002/(SICI)1099-0518(199610)34:14<2889::AID-POLA6>3.0.CO;2-M ↗
17. S. Nakazato, T. Amari, and T. Yamaoka,J. Appl. Polym. Sci.,38, 627 (1989).10.1002/app.1989.070380404 ↗
18. T. W. Leeet al., J. Korean Fiber Soc.,34, 661 (1997).