journal article·2015-07

Rheological model for compression of spacer fabrics

Ravi Chattopadhyay, Bipin Kumar, Prasenjit Barik

Fibers and Polymers· Volume 16· Issue 7
Publisher page

Abstract

Compression behavior of spacer fabrics are critical for their energy-absorption capabilities, and therefore are significant for many functional areas related to medical, protection, composites, etc. These paper further attempts to describe the compression profile of warp knitted spacer fabrics using rheological models. It has been observed from the compression load-deformation curve that the overall deformations in these materials include both elastic as well as flow deformation characteristics. To model this complex elastic-plastic deformation behavior, several mechanical models were developed and investigated using various series or parallel combinations of linear or nor-linear spring and dashpot elements. It was found that the three component model, compromises of Maxwell’s arm connected parallel with a non-linear spring, explained the experimental compression curves much better compared with Maxwell and Kelvin models. The model parameters can be used to describe several attributes of compression including initial modulus, plateau range, buckling strain and densification point.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Textile materials and evaluations · Mechanical Behavior of Composites · Structural Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. L. Ciobanu, C. Dumitras, and F. Filipescu, Ind. Textila, 62, 94 2011.
2. J. Yip and S.-P. Ng, J. Mater. Process. Technol., 206, 359 2008.10.1016/j.jmatprotec.2007.12.073 ↗
3. T. Dias and G. B. Delkumburewatte, J. Text. Inst., 101, 143 2010.10.1080/00405000802309576 ↗
4. D. M. Armakan and A. Roye, Fiber. Polym., 10, 116 2009.10.1007/s12221-009-0116-7 ↗
5. T. Dias, R. Monaragala, and E. Lay, Meas. Sci. Technol., 18, 1979 2007.10.1088/0957-0233/18/7/026 ↗
6. M. Xu-hong and G. Ming-Qiao, Fibres Text. East. Eur., 16, 66 2008.
7. F. Mokhtari, M. Shamshirsaz, M. Latifi, and M. Maroufi, J. Eng. Fiber. Fabr., 6, 23 2011.
8. Z. Du and H. Hu, Text. Res. J., 82, 1569 2012.10.1177/0040517511427967 ↗
9. L. Z. Zhang, G.-M. Jiang, X.-H. Miao, and H.-L. Cong, Fibres Text. East. Eur., 20, 92 2012.
10. S. Vassiliadis, A. Kallivretaki, N. Psilla, C. Provatidis, and D. Mecit, Fibres Text. East. Eur., 17, 76 2009.
11. M. Sheikhzadeh, M. Ghane, Z. Eslamian, and E. Pirzadeh, J. Text. Inst., 101, 795 2010.10.1080/00405000903268796 ↗
12. B. Kumar, A. Das, and R. Alagirusamy, Biorheology, 49, 1 2012.10.3233/BIR-2012-0601 ↗
13. W. E. Morton and J. W. S Hearle, “Physical Properties of Textile Fiber”, 4th ed., pp.357–41, Woodhead Publishing Limited, Cambridge CB21 6AH, England, 2008.10.1533/9781845694425.357 ↗
14. I. M. Ward and J. Sweeny, “An Introduction to the Mechanical Properties of Solid Polymers”, 2nd ed., pp.53–76, John Wiley & Son Ltd., West Sussex PO19 8SQ, England, 2004.
15. J. Geršak, D. Šajn, and V. Bukošek, Int. J. Cloth. Sci. Technol., 17, 188 2005.10.1108/09556220510590885 ↗
16. D. Šajn, J. Geršak, and R. Flajs, Text. Res. J., 76, 742 2006.10.1177/0040517507074713 ↗
17. B. Kumar, A. Das, and R. Alagirusamy, J. Biomech. Eng., 134, 094501 2012.10.1115/1.4007176 ↗