journal article·2026-04-28

Heat dissipation performance of solid-state drives under convective cooling: analyzing the impact of heat sink fin spacing

Rilwan Kayode Apalowo, Aizat Abas, Muhammad Razin Bin Salim, Samuel Olusina Famuyiwa, Chia Siang Kok

Microelectronics International· Volume 43· Issue 3
Publisher page

Abstract

Purpose This study aims to investigate the influence of heat sink fin spacing on the thermal management performance of solid-state drives (SSDs) under natural convection cooling. Design/methodology/approach A three-dimensional numerical model based on the finite volume method (FVM) was developed to analyze heat dissipation in the SSD. Parametric studies examined the effects of varying fin spacings (2.4–7.2 mm) on key metrics, including temperature distribution, average surface heat transfer coefficient, Nusselt number and thermal resistance. Experimental validation was performed using a heat transfer test following Joint Electron Device Engineering Council (JEDEC’s) JESD51-4A Standard to ensure reliability. Findings Increasing fin spacing improved convective heat transfer, with the highest surface heat transfer coefficient (3.29 W/m²K) and Nusselt number (13.56) recorded at 7.2 mm fin spacing. This represented an increase of 37% and 42.5%, respectively, compared to 2.4 mm spacing. However, wider spacing increased thermal resistance, reaching 37.91 K/W at 7.2 mm, highlighting a trade-off between convective enhancement and heat dissipation efficiency. Experimental validation confirmed the accuracy of the numerical model, with a maximum deviation of 4.59%. Practical implications The findings offer guidelines for optimizing heat sink designs in electronic cooling applications, balancing airflow improvements with thermal resistance minimization. Originality/value This study systematically analyzes the impact of fin-to-fin spacing on SSD thermal performance, addressing a critical gap in heat sink optimization. Unlike previous works that broadly address electronics cooling or focus on forced convection, this research uniquely targets SSDs operating under natural convection and evaluates the effect of fin spacing on both thermal and convective metrics. By integrating detailed 3D numerical modeling and experimental validation, it offers novel insights into optimizing passive cooling in high-power data storage devices.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Heat Transfer and Optimization · Fluid Dynamics and Thin Films · Parallel Computing and Optimization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Universiti Sains Malaysia, Engineering Campus School of Mechanical Engineering, , Nibong Tebal, , and Department of Mechanical Engineering, Federal University of Technology Akure, Akure,

Universiti Sains Malaysia, Engineering Campus School of Mechanical Engineering, , Nibong Tebal,

Federal University of Technology Akure Department of Mechanical Engineering, , Akure,

Western Digital Corp. , Taman Perindustrian, Batu Kawan,

Funding

BJIM Matching Grant · USM-WD CiA Lab Grant

References (48)

Show source-provided references
1. Optimization of thermal design of heat sinks: a review10.1016/J.IJHEATMASSTRANSFER.2017.10.099 ↗
2. Investigating the impacts of heat sink design parameters on heat dissipation performance of semiconductor packages10.1016/J.IJTHERMALSCI.2024.109490 ↗
3. The influence of temperature on wave scattering of damaged segments within composite structures10.1051/MATECCONF/201821119005 ↗
4. Numerical investigation of thermal fatigue crack growth behavior in SAC305 BGA solder joints10.1108/SSMT-08-2023-0049/FULL/XML ↗
5. Thermal fatigue life prediction and intermetallic compound behaviour of SAC305 BGA solder joints subject to accelerated thermal cycling test10.1108/SSMT-12-2023-0075/FULL/XML ↗
6. A transient thermal tester as an alternative to thermocouples for characterizing heat sinks10.1109/SEMI-THERM.2018.8357366 ↗
7. Numerical analysis of convection heat transfer from an array of perforated fins using the Reynolds averaged Navier–stokes equations and large-eddy simulation method10.1016/J.APM.2018.06.005 ↗
8. Prediction methods for natural convection around hollow hybrid fin heat sinks10.1016/J.IJTHERMALSCI.2018.01.002 ↗
9. Natural (free) convection10.1016/B978-0-12-802296-2.00007-X ↗
10. A CFD modeling of heat transfer between CGNPs/H2O eco-friendly nanofluid and the novel nature-based designs heat sink: hybrid passive techniques for CPU cooling10.1016/J.TSEP.2022.101604 ↗
11. Design considerations for measuring ambient air temperature
12. A composite grid solver for conjugate heat transfer in fluid–structure systems10.1016/J.JCP.2009.02.007 ↗
13. Comparative analysis study on SSD, HDD, and SSHD10.17762/TURCOMAT.V12I3.1644 ↗
14. A natural convection horizontal straight-fin heat sink design problem to enhance heat dissipation performance10.1016/J.IJTHERMALSCI.2022.107540 ↗
15. A study of characteristic length for natural convection heat transfer to ice spheres melting in air10.1115/IMECE1998-0776 ↗
16. JEDEC (2019), “JESD51-4A: thermal test chip guideline (wire bond and flip chip)”, available at:Link to the cited article.
17. Comparison of thermal performance between plate-fin and pin-fin heat sinks in natural convection10.1016/J.IJHEATMASSTRANSFER.2014.12.023 ↗
18. Optimization and simulation of heat loss in pyrolysis reactor10.1016/J.MATPR.2022.08.285 ↗
19. The study of the influence on heat dissipation effectiveness of the Pin-Fin angle and spacing in a liquid cooling module10.1109/IMPACT56280.2022.9966696 ↗
20. Experimental and numerical study on temperature control performance of phase change material heat sink10.1016/J.APPLTHERMALENG.2023.122081 ↗
21. Nucleate boiling heat transfer and critical heat flux in controllable droplet trains cooling10.1016/J.APPLTHERMALENG.2025.125824 ↗
22. Thermal analysis for heat transfer enhancement in perforated pin fins of various shapes with staggered arrays10.1080/01457632.2018.1429047 ↗
23. Describing the uncertainties in experimental results10.1016/0894-1777(88)90043-X ↗
24. Numerical study of mixed convection heat transfer of various fin arrangements in a horizontal channel10.1016/J.JESTCH.2016.12.007 ↗
25. Moukalled · 201610.1007/978-3-319-16874-6_3 ↗
26. Heat transfer augmentation of natural convection heat sink through notched fin design10.1016/J.ICHEATMASSTRANSFER.2023.106676 ↗
27. Thermodynamic analysis of supercritical Brayton cycles using CO2-based binary mixtures for solar power tower system application10.1016/J.ENERGY.2022.124286 ↗
29. Optimization of fin spacing of vertical plate fin heat sink in natural convection10.35940/IJEAT.A9467.109119 ↗
30. Heat transfer of a tapered fin heat sink under natural convection10.1016/J.MATPR.2021.02.565 ↗
31. Three dimensional steady-state temperature prediction of volumetric heating sources embedded into multi-layer electronic board substrate10.1109/ITHERM.2017.7992528 ↗
32. Transient thermal behavior of a passive heat sink integrated with phase change material: a numerical simulation10.1016/J.IJFT.2023.100454 ↗
33. A study on the effect of fin pitch variation on the thermal performance of a bus duct conductor10.1016/J.IJTHERMALSCI.2022.107938 ↗
34. Thermal performance of the aluminum fin-copper wool heat sink for cooling solid-state drives
35. Solar photovoltaic cells performance improvement by cooling technology: an overall review10.1016/J.IJHYDENE.2020.12.164 ↗
36. An enviroeconomic review of the solar PV cells cooling technology effect on the CO2 emission reduction10.1016/J.SOLENER.2021.01.016 ↗
37. Application of CNTs/H2O nanofluid and the wavy fin with dimples in thermal management of CPU: a numerical modeling of hybrid passive cooling10.1080/10407782.2024.2343591 ↗
38. Experimental investigation of heat transfer enhancement through embossed fin heat sink under natural convection10.1016/J.EXPTHERMFLUSCI.2014.10.011 ↗
39. Study on interaction mechanism between natural convection and forced convection during storage and temperature rise of waxy crude oil tank10.1080/19942060.2025.2498354;CTYPE:STRING:JOURNAL ↗
40. Numerical modeling of natural convection heat transfer from radial branching heat sinks for LED cooling applications10.1016/J.APPLTHERMALENG.2024.122446 ↗
41. Natural convection10.1007/978-3-030-58338-5_16 ↗
42. Versteeg · 2007
43. Interpenetrating double-network ANF/MXene-K+ aerogels enable integrated electromagnetic interference shielding, infrared camouflage, and joule heating in adaptive multifunctional systems10.26599/NR.2025.94907702 ↗
44. Effects of different fin spacings on the Nusselt number and Reynolds number in perforated finned heat exchangers10.1080/01457632.2010.483875;PAGE:STRING:ARTICLE/CHAPTER ↗
45. Natural convection around a radial heat sink10.1016/J.IJHEATMASSTRANSFER.2010.02.032 ↗
46. Experimental and numerical investigation of natural convection heat transfer of W-type fin arrays10.1016/J.IJHEATMASSTRANSFER.2020.119315 ↗
47. Integrity of newton’s cooling law based on thermal convection theory of heat transfer and entropy transfer10.1038/S41598-022-18961-8 ↗
48. Enabling high-sensitivity calorimetric flow sensor using vanadium dioxide phase-change material with predictable hysteretic behavior10.1109/TED.2025.3532249 ↗